Unika | Kouei Japan Trading | Get Quotation

UNIKA Mini Pack Series

kvtpart — Fri, 13 Nov 2020 10:19:56 +0000

Manufacturer: UNIKA

Model: Non-plug screw (Silver plating), Non-plug screw (Stainless steel), Board lock, NP plug, NP anchor, Hollow plug

■Mini pack series of compact package which can display required products by only required quantity small packs.
■Efficiently exhibits concrete machine screws and plug items and is also easy for restocking and stock management.
■Upper part of pack mat is colored for classification in order to facilitate selection of products.

Non-plug screw (Silver plating): [Screwing type]
Non-plug screw (Stainless steel): [Screw fixation type]
Board lock: [Clamping type]
NP plug: [Screwing type]
NP anchor: [Hammering type]
Hollow plug: [Clamping type]

SPECIFICATIONS

Non-plug screw (Silver plating)

P-425-SMP	Pan head	25
P-432-SMP	Pan head	20
F-425-SMP	Countersunk head	25
F-432-SMP		20
F-535-SMP		8
F-545-SMP		8
F-560-SMP		6
F-570-SMP		4
F-670-SMP		4
PW-425-SMP	Washer faced head	20
PW-432-SMP	Washer faced head	15

Non-plug screw (Stainless steel)

Code	Head shape	Pcs./Ctr
PS-425MP	Pan head	20
PS-432MP	Pan head	18
FS-425MP	Countersunk head	20
FS-432MP	Countersunk head	18
PWS-425MP	Washer faced head	15
PWS-432MP	Washer faced head	10

Board lock

Code	Pcs./Ctr
B-405MP	4
B-409MP	4
B-416MP	3
B-423MP	3
B-409CMP	2
B-409LMP	2

NP plug

Code	Pcs./Ctr
NAS-525MP	10
NAS-630MP	8
NAS-840MP	4
NAS-1050MP	3

NP anchor

Code	Pcs./Ctr
NP-425MP	6
NP-640MP	4
NPS-640MP	3

Hollow plug

Code	Pcs./Ctr
NA-3MP	4
NA-9MP	4
NA-16MP	4

The post UNIKA Mini Pack Series first appeared on Kouei Japan Trading | Get Quotation.

UNIKA Fastening Pack Series

kvtpart — Fri, 13 Nov 2020 10:13:10 +0000

Manufacturer: UNIKA

Model: Rooty anchor C type, Rooty anchor SC type (Stainless steel), Rooty anchor T type, Rooty anchor ST type (Stainless steel), Unicon anchor UC type, Rooty cut CA type, Non-plug screw (Silver color), Non-plug screw (Stainless steel), Bolt plug, Board lock, NP anchor, NP ALC anchor, NP plug, Hollow plug.

■Fastening pack series which can display required products by only required quantity small packs
■Efficiently exhibits a wide variety of items and is also easy for restocking and stock management.
■Upper part of pack mat is colored for classification in order to facilitate selection of products.

Rooty anchor C/SC: [Spindle hammering type]
Rooty anchor T/ST: [Spindle hammering type]
Unicon anchor: [Internal cone hammering type]
Cut anchor: [Body hammering type]
Non-plug screw: [Screw fixation type]
Bolt plug: [Screwing type]
Board lock: [Clamping type]
NP anchor: [Hammering type]
NP ALC anchor: [Hammering type]
NP plug: [Screwing type]
Hollow plug: [Clamping type]

S size
(78*28*110)
M size
(78*33*138)
L size
(78*33*168)

SPECIFICATIONS

Rooty anchor C type

Code	Size	Pcs./ctn
A-001	C-645	16
A-002	C-660	14
A-003	C-850	14
A-004	C-870	12
A-005	C-1050	12
A-006	C-1060	12
A-007	C-1080	8
A-008	C-1090	6
A-012	C-1270	6

Rooty anchor SC type (Stainless steel)

Code	Size	Pcs./ctn
A-051	SC-645	8
A-052	SC-660	6
A-053	SC-850	6
A-054	SC-870	4
A-055	SC-1050	4
A-056	SC-1060	4
A-057	SC-1080	2
A-062	SC-1270	2

Rooty anchor T type

Code	Size	Pcs./ctn
A-101	T-420	30
A-102	T-425	30

Rooty anchor ST type (Stainless steel)

Code	Size	Pcs./ctn
A-151	ST-420	12
A-152	ST-425	12

Unicon anchor UC type

Code	Size	Pcs./ctn
B-003	UC-3040	12
B-004	UC-4050	4
B-005	UC-3030B	12

Rooty cut CA type

Code	Size	Pcs./ctn
C-003	38CA	10
C-004	48CA	4

Non-plug screw (Silver color)

Code	Size	Pcs./ctn
D-001	Pan head 425	50
D-002	Pan head 432	50
D-003	Countersunk head 425	50
D-004	Countersunk head 432	50
D-005	Washer faced head 425	50
D-006	Washer faced head 432	50

Non-plug screw (Stainless steel)

Code	Size	Pcs./ctn
D-051	Pan head 425	40
D-052	Pan head 432	40
D-053	Countersunk head 425	40
D-054	Countersunk head 432	40

Bolt plug

Code	Size	Pcs./ctn
D-202	#100	14
D-203	#200	10
D-204	#300	6
D-205	#400	4

Board lock

Code	Size	Pcs./ctn
D-251	B-405	12
D-252	B-409	12
D-253	B-416	12
D-254	B-423	10

NP anchor

Code	Size	Pcs./ctn
E-001	NP-425	20
E-002	NP-640	14
E-051	NPS-640	16

NP ALC anchor

Code	Size	Pcs./ctn
E-106	NBA-2559	4
E-107	NBA-3860	4

NP plug

Code	Size	Pcs./ctn
E-151	NAS-525	50
E-152	NAS-630	40
E-153	NAS-840	20
E-154	NAS-1050	12

Hollow plug

Code	Size	Pcs./ctn
E-201	NA-3	10
E-202	NA-9	10
E-203	NA-16	8

The post UNIKA Fastening Pack Series first appeared on Kouei Japan Trading | Get Quotation.

UNIKA Anchor Series Individual Resale

kvtpart — Fri, 13 Nov 2020 09:47:44 +0000

Manufacturer: UNIKA

Model: Unicon anchor UC-X type (Unichrome treatment), Unicon anchor UCS-X type (Stainless steel)

■Each anchor is provided with a label indicating “Matching preparation hole drill diameter” and “JAN code for individual resale,” which makes it is unnecessary to carry out time-consuming tasks at stores.
■The pieces can be immediately sold as they are only by opening the small box and displaying. Further, a POP function for promotion has been added for use as staging in stores.

JCAA product certification mark: Products having certification marks mean that they meet the assessment certification examination standard according to the Japan Construction Anchor Association.

■Preparation hole diameter is small and installation efficiency is enhanced because collar outside diameter is thin relative to female outside diameter.

SPECIFICAIONS

Unicon anchor UC-X type (Unichrome treatment)

Code	Thread diameter
UC-830X*	M8
UC-2530X*	W5/16
UC-3030BX	W3/8
UC-3040X*	W3/8
UC-4050X*	W1/2

Unicon anchor UCS-X type (Stainless steel)

Code	Thread diameter
UCS-3030BX	W3/8
UCS-3040X*	W3/8
UCS-4050X*	W1/2

The post UNIKA Anchor Series Individual Resale first appeared on Kouei Japan Trading | Get Quotation.

UNIKA Anchor Series Individual Resale

kvtpart — Fri, 13 Nov 2020 09:45:58 +0000

Manufacturer: UNIKA

Model: Rooty cut CA-X type (Chromate treatment), Rooty cut CAS-X type (Stainless steel)

■Each anchor is provided with a label indicating “Matching preparation hole drill diameter” and “JAN code for individual resale,” which makes it is unnecessary to carry out time-consuming tasks at stores.
■The pieces can be immediately sold as they are only by opening the small box and displaying. Further, a POP function for promotion has been added for use as staging in stores.

JCAA product certification mark: Products having certification marks mean that they meet the assessment certification examination standard according to the Japan Construction Anchor Association.

■Female anchor leaving no protrusion on concrete surface after installation allows for installation of hexagonal bolt, joint bar and hanger bolt.

SPECIFICATIONS

Rooty cut CA-X type (Chromate treatment)

Code	Thread diameter
6CA-X	M6
8CA-X*	M8
10CA-X*	M10
12CA-X*	M12
16CA-X*	M16
20CA-X	M20
28CA-X	W1/4
258CA-X*	W5/16
38CA-X*	W3/8
48CA-X*	W1/2
58CA-X*	W5/8

Rooty cut CAS-X type (Stainless steel)

Code	Thread diameter
6CAS-X	M6
8CAS-X*	M8
10CAS-X*	M10
12CAS-X*	M12
16CAS-X*	M16
28CAS-X	W1/4
258CAS-X*	M5/16
38CAS-X*	W3/8
48CAS-X*	W1/2
58CAS-X*	W5/8

The post UNIKA Anchor Series Individual Resale first appeared on Kouei Japan Trading | Get Quotation.

UNIKA BG Series Individual Resale

kvtpart — Fri, 13 Nov 2020 09:43:42 +0000

Manufacturer: UNIKA|
Model: BG/BGSType

■Each anchor is provided with a label indicating “Matching preparation hole drill diameter” and “JAN code for individual resale,” which makes it is unnecessary to carry out time-consuming tasks at stores.

■The pieces can be immediately sold as they are only by opening the small box and displaying. Further, a POP function for promotion has been added for use as staging in stores.

JCAA product certification mark: Products having certification marks mean that they meet the assessment certification examination standard according to the Japan Construction Anchor Association.

■Demonstrates reliable strength by installation with torque control and three-sided wedges. Installation over installed object is possible because thread diameter and preparation hole diameter are same.

SPECIFICATIONS

Big One BG-X type (Unichrome treatment)

Code	Thread diameter
BG-860X	M8
BG-1080X	M10
BG-1090X	M10
BG-1290X	M12
BG-1210X	M12
BGL-3070MX	M10 (High nut W3/8)

The post UNIKA BG Series Individual Resale first appeared on Kouei Japan Trading | Get Quotation.

UNIKA Anchor Series Individual Resale

kvtpart — Fri, 13 Nov 2020 09:42:04 +0000

Manufacturer: UNIKA

Model: T-lock TL-X type

■Each anchor is provided with a label indicating “Matching preparation hole drill diameter” and “JAN code for individual resale,” which makes it is unnecessary to carry out time-consuming tasks at stores.
■The pieces can be immediately sold as they are only by opening the small box and displaying. Further, a POP function for promotion has been added for use as staging in stores.

JCAA product certification mark: Products having certification marks mean that they meet the assessment certification examination standard according to the Japan Construction Anchor Association.

■As the main body diameter and the plate width are the same, anchoring is possible by drilling from above the fixture.

SPECIFICATIONS

T-lock TL-X type

Size	Thread diameter
TL-640X	M6
TL-650X	M6
TL-850X	M8
TL-860X	M8
TL-1050X	M10
TL-1070X	M10

The post UNIKA Anchor Series Individual Resale first appeared on Kouei Japan Trading | Get Quotation.

UNIKA Anchor Series Individual Resale

kvtpart — Fri, 13 Nov 2020 09:39:42 +0000

Manufacturer: UNIKA

Model: Rooty anchor CX type (Trivalent Chromate Treatment), Rooty anchor SC-X type (Stainless steel)

■Each anchor is provided with a label indicating “Matching preparation hole drill diameter” and “JAN code for individual resale,” which makes it is unnecessary to carry out time-consuming tasks at stores.
■The pieces can be immediately sold as they are only by opening the small box and displaying. Further, a POP function for promotion has been added for use as staging in stores.

JCAA product certification mark: Products having certification marks mean that they meet the assessment certification examination standard according to the Japan Construction Anchor Association.

■Simple work and secure installation by only a hammering pin. In addition, completion of hammering can be securely checked by only looking at the pin.

Rooty anchor CX type (Trivalent Chromate Treatment)

Code	Thread diameter (Outside diameter)
C-645X	M6
C-660X	M6
C-850X*	M8
C-870X*
C-890X*
C-1050X	M10
C-1060X*
C-1080X*
C-1090X*
C-1010X*
C-1012X*
C-1015X
C-1260X	M12
C-1270X*
C-1290X*
C-1210X*
C-1212X*
C-1215X*
C-1610X*	M16
C-1612X*
C-1615X*
C-2013X*	M20
C-3060X*	W3/8

Rooty anchor SC-X type (Stainless steel)

Code	Thread diameter (Outside Diameter)
SC-645X	M6
SC-660X	M6
SC-850X*	M8
SC-870X*
SC-890X*
SC-1050X	M10
SC-1060X*
SC-1080X*
SC-1090X*
SC-1012X*
SC-1015X
SC-1260X	M12
SC-1270X*
SC-1290X*
SC-1210X*
SC-1212X*
SC-1215X*
SC-1610X*	M16
SC-1612X*
SC-1615X*
SC-2013X*	M20
SC-3060X*	W3/8

The post UNIKA Anchor Series Individual Resale first appeared on Kouei Japan Trading | Get Quotation.

UNIKA SE Type Spin-In Resin A

kvtpart — Fri, 13 Nov 2020 09:37:26 +0000

Manufacturer: UNIKA
Model: SE type

Features

Excellent anchoring and earthquake resistance.
Can adapt to construction material that is in a wet state.
The sealed of the glass tube has a high alkali resistance preventing leaks. Also, it offers a long shelf life.

Uses

Concrete•Stone

1.Drill preparation hole.
2.Remove debris cleanly from inside hole.
3.Position capsule.
4.Insert bolt into hole while applying rotation and impact.
5.Do not move anchor bolt during specified hardening period after insertion.

Uses

Foundation work using steel reinforcers etc., highway construction, tunnel construction, installation work for vibrating machines.

Construction Drawing

Hardening Time Standard

Temperature(°C)	-5	5	20	30
Initial Hardening Time (min.)	300	60	20	10

(Do not move the anchor bar during the hardening time.)

Bolt Shape Used

Make sure to cut the edge of the anchor bar 45°for use.
Use one with an irregular surface for the hex head set screw or deformed steel bar.

Drill the preparation hole with the diameter and the depth as specified.
Clean the hole drilled with a metal brush and blowing equipment.
Be sure to wear safety protective equipment such as a facemask, eye protection glasses, and safety gloves during the operation.
Never inset the capsule without rotation.
Do not move or put weight on the installed bolts during the specified period for resin solidification.

JCAA Product Certification Mark

Products with this certification mark satisfy the evaluation and certification standards specified
by the Japan Construction Anchor Association (JCAA).

Size	Dia*Length(mm)
SE-10*	10.8×90
SE-12*	12.7×100
SE-16*	16.8×120
SE-20*	21.5×175
SE-22*	21.5×210
SE-24*	25.0×180

Size	Dia’Length	Volume	Bolt used	Basic dril conditions		Tensile strength	Pcs./box	Pcs./ctn	JAN Code
		(ml)	(aeformeo oarj	Dia(mm) 1 Depth(mm)		(kN)
SE-10*	10.8×90	6.6	MIO. W3/8	12.0	90	46.1	10	200	4989270930049
			DIO	13.0		35.6
SE-12*	12.7×100	9.8	M12. Wl/2	1-1.0	110	69.7	10	200	4989270930056
			D13	16.0		64.7
SE-16*	16.8×120	21.0	M16. W5/8	18.0	130	107.6	10	100	4989270930063
			D16	20.0		97.9
SE-20-	21.5×175	53.0	M20, W3/4	25.0	180	170.1	10	100	4989270930070
			D19	25.0		147.3
SE-22*	21.5×210	61.0	M22. W7/8	26.0	220	196.9	5	50	4989270930087
			D22	28.0		185.7
SE-24*	25.0×180	76.0	M24, W1	28.0	220	225.2	5	50	4989270930094
			D25	32.0		240.3

JCAA Certified Products
Maximum extraction strength values are values measured by UNIKA using the deformed steel bar type and not standard values.
(In accordance with the JCAA construction anchor test method)
Resin Anchor Hammering Attachments

Part No.	Convex Dimensions	Hammering Motor	JAN Code
T-1	12.7-mm square	Hammer drill	4989270920033
T-2	19-mm square	Hammer drill	4989270920040
S-1	12.7-mm square	Rotary hammer drill	4989270920064
D-1	12.7-mm square	Percussion drill	4989270920057

The post UNIKA SE Type Spin-In Resin A first appeared on Kouei Japan Trading | Get Quotation.

UNIKA HC-U Type (Hammer-in) Resin A

kvtpart — Fri, 13 Nov 2020 09:35:16 +0000

Manufacturer: UNIKA

Model: HC-U type (Hammer-in)

- ■Hammering only to install. OK for different sized bolts and rebar.
- ■Glass tube shape designed for fewer times to hammer.
- ■Good holding of glass and vinyl ester resin with high alkali resistance. Long shelf life before use.

Uses

Concrete•Stone

1.Drill parent material.
2.3.Cleaning in the hole. Remove debris inside hole cleanly using brush or blower.
4.Insert capsule in direction of arrow.
5.Screw in bolt. Hammer in to bottom of hole.
6.After inserting the item to be fixed, rotate it 2-3 times. Then, do not move it under the end of the curing time.

■Uses

Foundation work using steel reinforcers etc., highway construction, installation work for vibrating machines.

■Construction Drawing

■Bolt Shape Used

Make sure to use one with an irregular surface for the edge of the anchor bar by flush cut. Use the hex head set screw or deformed steel bar.

■Hardening Time Standard

Temperature(°C)	-5	5	20	30
Initial Hardening Time (min.)	300	60	30	15

(Do not move the anchor bar during the hardening time.)

The drilling diameter and depth must be according to the specification.
Clean the hole drilled with a metal brush and blowing equipment.
Be sure to insert the capsule in the direction of the arrow mark. Inserting in the wrong direction reduces the adhesiveness.
Put a mark on the anchor bolt to indicate the inserting depth.
Put on the attached cap to the anchor bolt before the installation.
Be sure to wear safety protective equipment such as a facemask, eye protection glasses, and safety gloves during use.
Use hammers of approximately 1.5kg in weight.
For overall screw bolts, hammer in those bolts with nuts attached on the hammered parts or use plastic hammers to protect the bolt heads.
Hammer in the capsule with appropriate impact forces to prevent the materials inside the capsule from splashing out.
Hammer in the bolts or steel bars of different shapes until the position marked.
Do not move the bolts or the steel bars of different shapes during the specified period for solidification after hammering in.
Do not drill with water.
For double bolt installation, hammer in the both bolts by machine.

JCAA Product Certification Mark: Products with this certification mark satisfy the evaluation and certification standards specified
by the Japan Construction Anchor Association (JCAA).

SPECIFICATIONS

Size	Dia*Length(mm)
HC-10U*	10.8×95
HC-12U*	13.7×110
HC-16U*	16.8×125
HC-20U*	21.5×175

The post UNIKA HC-U Type (Hammer-in) Resin A first appeared on Kouei Japan Trading | Get Quotation.

UNIKA PE-600G (Cartridge Type) Resin A

kvtpart — Fri, 13 Nov 2020 09:33:12 +0000

Manufacturer: UNIKA

Model: PE type (Resin cartridge), PE type exclusive parts, Installation specifications, Push pump, Metal brush, Extension nozzle(including three)

■Can be used for various bolts, sizes and shapes of different shape reinforced steels.
■Excellent in chemical resistance, and can be used for installation in water.
■Demonstrates stable fixing strength because primary material and hardening agent are constantly mixed by mixing nozzle.
■Adopts high performance epoxy resin with no resin contraction. Also less odor and toxicity.

Uses

Concrete•Rock bed

Drill vertically to target surface with the determined preparation diameter and preparation hole depth.
Use a dust collector or blower to thoroughly remove chips in the hole.
Remove chips adhered in the hole using a brush, and use a dust collector or blower to clean in the hole again.
Insert the nozzle down to the hole bottom and fill resin.
Insert the bolt down to the hole bottom while slowly turning it by hand.
Do not move the anchor bolt within the determined hardening time after embedding.

■Uses

Foundation work for iron frame, Passage construction work, Tunnel construction work, Installation for vibrating machines.

■Structural Drawing

■Installation specifications

Nominal diameter(mm)	M8	M10	M12	M16	M20	M22	M24
Preparation hole diameter(mm)	10.0	12.0	14.0	18.0	24.0	25.0	28.0
Embedment depth(mm)	80	90	110	130	170	190	210
Required resin amount(ml)	4	6	9	15	42	43	66
Recommended tightening torque(Nm)	10	20	40	80	120	140	160
Number of pieces installed(Pcs.)	137	91	61	36	13	12	8

*Number of pieces installed is for reference number of pieces at a loss rate of 20%.

■Shape of bolt used

Cannot be used for a round bar. Use bolts which have irregularity on a surface such as a continuous thread bolt and different shape bar steel.

■Guideline for hardening time

Temperature(℃)	5	15	25	35	40
Use time(minutes)	100	60	40	25	20
Hardening time(minutes)	2400	1440	660	540	480

(Do not move the anchor reinforcement within the hardening time.)

Avoid direct sunlight and store in a well-ventilated place where the temperature does not rise so high.
(Never raise the temperature above 40℃. Always keep the temperature in the range of 5 to 25℃.)
Do not bring close to fire or high temperature objects.
Cartridge can be stored until the expiration date for use under standard storage conditions.
Wear protective equipment (such as protective glasses and mask) when using.
When resin adheres to skin, irritation may occur in rare cases. Take action such as immediately wiping and rinsing with a hot soapy solution.
In addition, if resin gets into eyes, immediately rinse with a large amount of water and seek medical attention.

Make sure to provide the drilling diameter and drilling depth as described in the specifications.
Make sure to use both a metallic brush and blower to sufficiently clean inside the hole.
Make sure to mount the mixing nozzle with it just before use.
Make sure to discard first approximately 20~30cc at a time of first use and nozzle replacement. (Mixing improperly may result in reduction in strength.)
This cannot be used for a steel bar with no irregularity such as a round bar.
Refer to the scale on the cartridge label for discharge resin amount.
Do not move the bar steel nor apply load within the determined hardening time.
SPECIFICATIONS
PE type (Resin cartridge)
Size Capacity(ml)

PE-600G 600
PE type exclusive parts
Product name Size Matching cartridge

Mixing nozzle(2 Pcs.) RA-MX2PEGN PE-G

Injection gun 600 RA-GUN600 PE-600G
Installation specifications

Use bolt different shape reinforced steel	Preparation hole diameter (mm)
M8	10
M10	12
D10	13
M12	14
D13	15
M16	18
D16	20
M20	24
D19	25
M22	25
D22	28
M24	28
D25	32
M30	35
D29	38

■Related items
Push pump
Size Specifications

RA-PUP (Nozzle diameter)

10mm

(Hose length)

270mm
Metal brush
Size Specifications

RA-MB10 Φ10*300

RA-MB13 Φ13*300

RA-MB18 Φ18*300

RA-MB28 Φ28*300
Extension nozzle(including three)
Size Specification

RA-EXP3 Φ8×1m

The post UNIKA PE-600G (Cartridge Type) Resin A first appeared on Kouei Japan Trading | Get Quotation.

UNIKA PE-400G Cartridge Type Resin A

kvtpart — Fri, 13 Nov 2020 09:31:13 +0000

Precautions on use
Manufacturer: UNIKA
Model: PE type

Features

You can use it for various bolts, sizes, and shapes of different reinforced steels.
Excellent in chemical resistance, and can be used for installation in water.
The mixing nozzle constantly mixes the primary material and hardening agent, demonstrating stable fixing strength.
Adopts high performance epoxy resin with no resin contraction. Also less odor and toxicity.

Uses

Concrete•Rock bed

1.Drill vertically to target surface with the determined preparation diameter and preparation hole depth.
2. Use a dust collector or blower to thoroughly remove chips in the hole.
3. Remove chips adhered in the hole using a brush, and use a dust collector or blower to clean in the hole again.
4. Insert the nozzle down to the hole bottom and fill resin.
5.Insert the bolt down to the hole bottom while slowly turning it by hand.
6. Do not move the anchor bolt within the determined hardening time after embedding
Foundation work for iron frame, Passage construction work, Tunnel construction work, Installation for vibrating machines.

Structural Drawing

Installation specifications

Nominal diameter(mm)	M8	M10	M12	M16	M20	M22	M24
Preparation hole diameter(mm)	10.0	12.0	14.0	18.0	24.0	25.0	28.0
Embedment depth(mm)	80	90	110	130	170	190	210
Required resin amount(ml)	4	6	9	15	42	43	66
Recommended tightening torque(Nm)	10	20	40	80	120	140	160
Number of pieces installed(Pcs.)	87	58	38	23	8	8	5

*Number of pieces installed is for reference number of pieces at a loss rate of 20%.

Shape of bolt used

You cannot use it for a round bar. Use bolts with surface irregularities, such as continuous thread bolts, and bar steels of different shapes.
Guideline for hardening time

Temperature(℃)	5	15	25	35	40
Use time(minutes)	100	60	40	25	20
Hardening time(minutes)	2400	1440	660	540	480

(Do not move the anchor reinforcement within the hardening time.)
Precautions on use
Avoid direct sunlight and store in a well-ventilated place where the temperature does not rise so high.
(Never raise the temperature above 40℃. Always keep the temperature in the range of 5 to 25℃.)
Do not bring close to fire or high temperature objects.
You can store the cartridge until the expiration date under standard storage conditions.
Wear protective equipment (such as protective glasses and mask) when using.When resin adheres to skin, irritation may occur in rare cases.
Take action such as immediately wiping and rinsing with a hot soapy solution.
In addition, if resin gets into eyes, immediately rinse with a large amount of water and seek medical attention.
Precautions on installation
Make sure to provide the drilling diameter and drilling depth as described in the specifications.
Use both a metallic brush and a blower to thoroughly clean inside the hole.
Make sure to mount the mixing nozzle with it just before use.Make sure to discard first approximately 20~30cc at a time of first use and nozzle replacement. (Mixing improperly may result in reduction in strength.)
This cannot be used for a steel bar with no irregularity such as a round bar.
Refer to the scale on the cartridge label for discharge resin amount.
Do not move the bar steel nor apply load within the determined hardening time.

SPECIFICATIONS

PE type (Resin cartridge)

Size	Capacity(ml)
PE-400G	400

PE type exclusive parts

Product name Size Matching cartridge

Mixing nozzle(2 Pcs.) RA-MX2PEGN PE-G

Injection gun 400 RA-GUN400 PE-400G

Installation specifications

Use bolt different shape reinforced steel	Preparation hole diameter(mm)
M8	10
M10	12
D10	13
M12	14
D13	16
M16	18
D16	20
M20	24
D19	25
M22	25
D22	28
M24	28
D25	32
M30	35
D29	38

Use bolt different shape reinforced steel	Preparation hole diameter (mm)	Embedment depth (mm)	Recommended tightening torque (Nm)	Required resin amount (ml)	Max. extraction strength (KN)	Number ot pieces installed (PCS)
MB	10.0	80	10	4	36.6	87
MIO	12.0	9-0	20	6	56.9	58
DIO	13.0	9-0	–	7	35.2	50
M12	14.0	110	40	9	82.2	38
D13	16.0	110	–	7	63.6	50
M16	18.0	130	80	15	145.6	23
D16	20.0	130	–	17	96.5	19
M2O	24.0	170	120	42	191.8	8
D19	25.0	170	–	42	158.1	8
M22	25.0	190	140	43	238.7	8
D22	28.0	190	–	52	188.0	6
M24	28.0	210	160	66	245.6	5
D25	32.0	210	–	75	232.1	4
M3O	35.0	280	200	135	–	2
D29	38.0	280	–	165	–	2

Metal brush

Size Specifications

RA-MB10 Φ10*300

RA-MB13 Φ13*300

RA-MB18 Φ18*300

RA-MB28 Φ28*300

Extension nozzle(including three)

Size Specification

RA-EXP3 Φ8×1m

The post UNIKA PE-400G Cartridge Type Resin A first appeared on Kouei Japan Trading | Get Quotation.

UNIKA GE-410C (Cartridge Type) Resin A

kvtpart — Fri, 13 Nov 2020 09:28:56 +0000

Manufacturer: UNIKA

Model: GE-C type (Resin cartridge), GE type exclusive parts, Installation specifications, Push pump, Metal brush, Extension nozzle(including three), Plastic sleeve (including 10 pieces).

■Uses resin for cold area with short hardening time.
■Can be used for various bolts, sizes and shapes of different reinforced steels.
■Used extensively for concrete, brick, stone material and hollow base material.
■Demonstrates stable fixing strength because primary material and hardening agent are constantly mixed by mixing nozzle.
■Adopts a highly alkali resistant epoxy acrylate resin.

Uses

Concrete•Stone material•Hollow base material•ALC

Drill vertically to target surface with the determined preparation diameter and preparation hole depth.
Use a dust collector or blower to thoroughly remove chips in the hole.
Remove chips adhered in the hole using a brush, and use a dust collector or blower to clean in the hole again.
Insert the nozzle down to the hole bottom and fill resin.
Insert the bolt down to the hole bottom while slowly turning it by hand.
Do not move the anchor bolt within the determined hardening time after embedding.

■Uses

Foundation work for iron frame, Passage construction work, Tunnel construction work, Installation for vibrating machines.

■Installation specifications

Nominal diameter(mm)	M8	M10	M12	M16	M20	M22	M24
Preparation hole diameter(mm)	10.0	12.0	14.0	18.0	24.0	25.0	28.0
Embedment depth(mm)	80	90	110	130	170	190	210
Required resin amount(ml)	4	6	9	15	42	43	66
Recommended tightening torque(Nm)	10	20	40	80	120	140	160
Number of pieces installed(Pcs.)	92	62	40	25	8	8	5

*Number of pieces installed is for reference number of pieces at a loss rate of 20%.

■Plastic sleeve installation specifications

Nominal diameter(mm)	M8	M10	M12
Preparation hole diameter(mm)	16.0	16.0	20.0
Matching sleeve(Code)	RA-P1685	RA-P1685	RA-P2085
Required resin amount(ml)	30	30	40

■Structural Drawing

■Installation Example

Continuous thread bolt
Plastic sleeve

■Shape of bolt used

Cannot be used for a round bar. Use bolts which have irregularity on a surface such as a continuous thread bolt and different shape bar steel.

■Guideline for hardening time

Temperature(℃)	-18	-10	-5	0	15
Use time(minutes)	90	40	25	15	5
Hardening time(minutes)	540	150	75	45	15

(Do not move the anchor reinforcement within the hardening time.)

Avoid direct sunlight and store in a well-ventilated place where the temperature does not rise so high.
(Never raise the temperature above 40℃. Always keep the temperature in the range of 5 to 25℃.)
Do not bring close to fire or high temperature objects.
Cartridge can be stored until the expiration date for use under standard storage conditions.
Wear protective equipment (such as protective glasses and mask) when using.
When resin adheres to skin, irritation may occur in rare cases. Take action such as immediately wiping and rinsing with a hot soapy solution.
In addition, if resin gets into eyes, immediately rinse with a large amount of water and seek medical attention.

Make sure to provide the drilling diameter and drilling depth as described in the specifications.
Make sure to use both a metallic brush and blower to sufficiently clean inside the hole.
Make sure to mount the mixing nozzle with it just before use.
Make sure to discard first approximately 20~30cc at a time of first use and nozzle replacement. (Mixing improperly may result in reduction in strength.)
This cannot be used for a steel bar with no irregularity such as a round bar.
Refer to the scale on the cartridge label for discharge resin amount.
Do not move the bar steel nor apply load within the determined hardening time.

SPECIFICATIONS

GE-C type (Resin cartridge)

Size	Capacity(ml)
GE-410C	410

GE type exclusive parts

Product name	Size	Matching cartridge
Mixing nozzle(3 Pcs.)	RA-MX3	GE
Injection gun 410	RA-GUN410	GE-410
Air gun 410	RA-AGUN410	GE-410

Installation specifications

Use bolt different shape reinforced steel	Preparation hole diameter(mm)
M8	10
M10	12
D10	13
M12	14
D13	15
M16	18
D16	20
M20	24
D19	25
M22	25
D22	28
M24	28
D25	32
M30	35
D29	38

■Related items

Push pump

Size	Specifications
RA-PUP	(Nozzle diameter)
	10mm
	(Hose length)
	270mm

Metal brush

Size	Specifications
RA-MB10	Φ10*300
RA-MB13	Φ13*300
RA-MB18	Φ18*300
RA-MB28	Φ28*300

Extension nozzle(including three)

Size	Specification
RA-EXP3	Φ8×1m

Plastic sleeve (including 10 pieces)

Size	Specifications
RA-P1685	16*85(M8/10)
RA-P2085	20*85(M12)

The post UNIKA GE-410C (Cartridge Type) Resin A first appeared on Kouei Japan Trading | Get Quotation.

UNIKA GE-410 (Cartridge Type) Resin A

kvtpart — Fri, 13 Nov 2020 09:26:53 +0000

Manufacturer: UNIKA

Model: GE type (Resin cartridge), GE type exclusive parts, Installation specifications, GE-410 TOOL BOX SET, Push pump, Metal brush, Extension nozzle(including three), Plastic sleeve (including 10 pieces)

■Can be used for various bolts, sizes and shapes of different reinforced steels.
■Used extensively for concrete, brick, stone material and hollow base material.
■Demonstrates stable fixing strength because primary material and hardening agent are constantly mixed by mixing nozzle.
■Adopts a highly alkali resistant epoxy acrylate resin.

Uses

Concrete•Stone material•Hollow base material•ALC

Drill vertically to target surface with the determined preparation diameter and preparation hole depth.
Use a dust collector or blower to thoroughly remove chips in the hole.
Remove chips adhered in the hole using a brush, and use a dust collector or blower to clean in the hole again.
Insert the nozzle down to the hole bottom and fill resin.
Insert the bolt down to the hole bottom while slowly turning it by hand.
Do not move the anchor bolt within the determined hardening time after embedding.

■Uses

Foundation work for iron frame, Passage construction work, Tunnel construction work, Installation for vibrating machines.

■Structural Drawing

Nominal diameter(mm)	M8	M10	M12	M16	M20	M22	M24
Preparation hole diameter(mm)	10.0	12.0	14.0	18.0	24.0	25.0	28.0
Embedment depth(mm)	80	90	110	130	170	190	210
Required resin amount(ml)	4	6	9	15	42	43	66
Recommended tightening torque(Nm)	10	20	40	80	120	140	160
Number of pieces installed(Pcs.)	92	62	40	25	8	8	5

■Installation Example

Continuous thread bolt
Plastic sleeve

■Shape of bolt used

Cannot be used for a round bar. Use bolts which have irregularity on a surface such as a continuous thread bolt and different shape bar steel.

■Guideline for hardening time

Temperature(℃)	-5	5	15	25	35
Use time(minutes)	40	20	9	5	3
Hardening time(minutes)	180	90	60	30	20

(Do not move the anchor reinforcement within the hardening time.)

■Plastic sleeve installation specifications

Nominal diameter(mm)	M8	M10	M12
Preparation hole diameter(mm)	16.0	16.0	20.0
Matching sleeve(Code)	RA-P1685	RA-P1685	RA-P2085
Required resin amount(ml)	30	30	40

Avoid direct sunlight and store in a well-ventilated place where the temperature does not rise so high.
(Never raise the temperature above 40℃. Always keep the temperature in the range of 5 to 25℃.)
Do not bring close to fire or high temperature objects.
Cartridge can be stored until the expiration date for use under standard storage conditions.
Wear protective equipment (such as protective glasses and mask) when using.
When resin adheres to skin, irritation may occur in rare cases. Take action such as immediately wiping and rinsing with a hot soapy solution.
In addition, if resin gets into eyes, immediately rinse with a large amount of water and seek medical attention.

Make sure to provide the drilling diameter and drilling depth as described in the specifications.
Make sure to use both a metallic brush and blower to sufficiently clean inside the hole.
Make sure to mount the mixing nozzle with it just before use.
Make sure to discard first approximately 20~30cc at a time of first use and nozzle replacement. (Mixing improperly may result in reduction in strength.)
This cannot be used for a steel bar with no irregularity such as a round bar.
Refer to the scale on the cartridge label for discharge resin amount.
Do not move the bar steel nor apply load within the determined hardening time.
SPECIFICATIONS
Size Capacity(ml)

GE-410 410
GE type exclusive parts
Product name Size Matching cartridge

Mixing nozzle(3 Pcs.) RA-MX3 GE

Injection gun 410 RA-GUN410 GE-410

Air gun 410 RA-AGUN410 GE-410
Installation specifications

Use bolt different shape reinforced steel	Preparation hole diameter (mm)
M8	10
M10	12
D10	13
M12	14
D13	15
M16	18
D16	20
M20	24
D19	25
M22	25
D22	28
M24	28
D25	32
M30	35
D29	38

GE-410 TOOL BOX SET

Product name	Content(Pc.)
TB-410D(with drill)	GE-4103 Injection gun 4101
TB-410D(with drill)	SDS Plus UX (12.0X160/14.0X210)*each 1
Standard set product	Mixing nozzle6 Plastic sleeve 16855 Push pump*1 Metal brush(10/13/18) each 1

■Related items
Push pump
Size Specifications

RA-PUP (Nozzle diameter)

10mm

(Hose length)

270mm
Metal brush
Size Specifications

RA-MB10 Φ10*300

RA-MB13 Φ13*300

RA-MB18 Φ18*300

RA-MB28 Φ28*300
Extension nozzle(including three)
Size Specification

RA-EXP3 Φ8×1m
Plastic sleeve (including 10 pieces)
Size Specifications

RA-P1685 16*85(M8/10)

RA-P2085 20*85(M12)

The post UNIKA GE-410 (Cartridge Type) Resin A first appeared on Kouei Japan Trading | Get Quotation.

UNIKA GE-165 (Cartridge Type) Resin A

kvtpart — Fri, 13 Nov 2020 09:23:07 +0000

Manufacturer: UNIKA

Model: GE type (Resin cartridge), GE type exclusive parts, Installation specifications, GE-165 TOOL BOX SET, Push pump, Metal brush, Extension nozzle(including three), Plastic sleeve (including 10 pieces)

■Can be used for various bolts, sizes and shapes of different reinforced steels.
■Used extensively for concrete, brick, stone material and hollow base material.
■Demonstrates stable fixing strength because primary material and hardening agent are constantly mixed by mixing nozzle.
■Adopts a highly alkali resistant epoxy acrylate resin.

GE-165 (180*50*250)" width="61" height="140" />
GE-165 (180*50*250)


Uses

Concrete•Stone material•Hollow base material•ALC




Drill vertically to target surface with the determined preparation diameter and preparation hole depth.
Use a dust collector or blower to thoroughly remove chips in the hole.
Remove chips adhered in the hole using a brush, and use a dust collector or blower to clean in the hole again.
Insert the nozzle down to the hole bottom and fill resin.
Insert the bolt down to the hole bottom while slowly turning it by hand.
Do not move the anchor bolt within the determined hardening time after embedding.





■Uses
Foundation work for iron frame, Passage construction work, Tunnel construction work, Installation for vibrating machines.
■Structural Drawing

■Installation specifications



 Nominal

diameter(mm)
M8
M10
M12
M16
M20
M22
M24


 Preparation

hole

diameter(mm)
10.0
12.0
14.0
18.0
24.0
25.0
28.0


 Embedment

depth(mm)
80
90
110
130
170
190
210


 Required

resin

amount(ml)
4
6
9
15
42
43
66


 Recommended

tightening

torque(Nm)
10
20
40
80
120
140
160


 Number of pieces

installed(Pcs)
31
21
13
8
2
2
1



*The number of pieces installed indicates the target number taking into consideration a loss rate of 20%.
■Installation Example



Continuous thread bolt



Plastic sleeve




■Shape of bolt used

Cannot be used for a round bar. Use bolts which have irregularity on a surface such as a continuous thread bolt and different shape bar steel.
■Guideline for hardening time



Temperature(℃)
-5
5
15
25
35


Use time(minutes)
40
20
9
5
3


Hardening time(minutes)
180
90
60
30
20



(Do not move the anchor reinforcement within the hardening time.)
■Plastic sleeve installation specifications



Nominal

diameter(mm)
M8
M10
M12


Preparation hole

diameter(mm)
16.0
16.0
20.0


Matching

sleeve(Code)
RA-P1685
RA-P1685
RA-P2085


Required resin

amount(ml)
30
30
40








Avoid direct sunlight and store in a well-ventilated place where the temperature does not rise so high.

(Never raise the temperature above 40℃. Always keep the temperature in the range of 5 to 25℃.)
Do not bring close to fire or high temperature objects.
Cartridge can be stored until the expiration date for use under standard storage conditions.
Wear protective equipment (such as protective glasses and mask) when using.
When resin adheres to skin, irritation may occur in rare cases. Take action such as immediately wiping and rinsing with a hot soapy solution.

In addition, if resin gets into eyes, immediately rinse with a large amount of water and seek medical attention.





Make sure to provide the drilling diameter and drilling depth as described in the specifications.
Make sure to use both a metallic brush and blower to sufficiently clean inside the hole.
Make sure to mount the mixing nozzle with it just before use.
Make sure to discard first approximately 20~30cc at a time of first use and nozzle replacement. (Mixing improperly may result in reduction in strength.)
This cannot be used for a steel bar with no irregularity such as a round bar.
Refer to the scale on the cartridge label for discharge resin amount.
Do not move the bar steel nor apply load within the determined hardening time.
SPECIFICATIONS
GE type (Resin cartridge)




Size
Capacity(ml)


GE-165
165





GE type exclusive parts




Product name
Size
Matching cartridge


Mixing nozzle(3 Pcs.)
RA-MX3
GE


Injection gun 165
RA-GUN165
GE-165





Installation specifications




Use bolt different shape reinforced steel
Preparation hole diameter (mm)


M8
10


M10
12


D10
13


M12
14


D13
15


M16
18


D16
20


M20
24


D19
25


M22
25


D22
28


M24
28


D25
32


M30
35


D29
38






GE-165 TOOL BOX SET





Product name
Content(Pc.)
JAN Code


TB-165D(with drill)
GE-165*4 Injection gun 165*1
4.98927E+12


SDS Plus UX (12.0X160/14.0X210)*each 1


Standard set product
Mixing nozzle*6 Plastic sleeve 1685*5 Push pump*1 Metal brush(10/13/18) each 1






■Related items

Push pump




Size
Specifications


RA-PUP
(Nozzle diameter)


10mm


(Hose length)


270mm





Metal brush




Size
Specifications


RA-MB10
Φ10*300


RA-MB13
Φ13*300


RA-MB18
Φ18*300


RA-MB28
Φ28*300





Extension nozzle(including three)




Size
Specification


RA-EXP3
Φ8×1m





Plastic sleeve (including 10 pieces)




Size
Specifications


RA-P1685
16*85(M8/10)


RA-P2085
20*85(M12)








The post UNIKA GE-165 (Cartridge Type) Resin A first appeared on Kouei Japan Trading | Get Quotation.



UNIKA Bolt Plug
kvtpart — Fri, 13 Nov 2020 09:19:47 +0000
Manufacturer: UNIKA
Model: Bolt plug




■This plug is ideal when installing into blocks.





Uses

Concrete•Block




Drill preparation hole.
Posi-tion plug.
Pull out bolt hard to make rotation stopper grip outside.
Loosen bolt to left, and remove.
Insert fixture and tighten with bolt to open outer cylinder and lock securely.




■Uses
Water pipe, sanitation, air-conditioning/heating equipment attachment work, and general wiring, plumbing, interior/exterior work.



Wear safety protection equipment such as eye protection glasses, a helmet etc. during use.
Be sure to use the drill of the appropriate size to secure proper strength for drilling the preparation hole.
Drill the preparation hole vertically against the drilled material surface.
Blow the hole thoroughly to remove shavings inside.

SPECIFICATIONS
Bolt plug



Size
Bolt dia
Head
Dia(mm)


#100
M4
Round head
7


#200
M5
8


#300
M6
10


#400
M8
Hexagon head
13.5


#500
M10
17.5


#600
M12
19.2





The post UNIKA Bolt Plug first appeared on Kouei Japan Trading | Get Quotation.


UNIKA NAS Type NP Plug
kvtpart — Fri, 13 Nov 2020 09:16:26 +0000
Manufacturer: UNIKA
Model: NAS type




■Uses special nylon material eliminating corrosion worries.
■Large range of available sizes matches wide range of wood screw sizes.
■2-stage shape makes hammering in easy with reliable gripping.





Uses

Concrete•Block•ALC




Drill preparation hole.
Position plug.
Srike in plug with hammer.
Secure with wood screw.




■Uses
For attaching coping fixtures, sashes, waterproof sheeting, electrical equipment interior decorations, etc.



Wear safety protection equipment such as eye protection glasses, a helmet etc. during use.
Be sure to use the drill of the appropriate size to secure proper strength for drilling the preparation hole.
Drill the preparation hole vertically against the drilled material surface.
Blow the hole thoroughly to remove shavings inside.
SPECIFICATIONS
NAS type




Size
Dia(mm)


NAS-525
5


NAS-630
6


NAS-840
8


NAS-1050
10


NAS-1260
12







The post UNIKA NAS Type NP Plug first appeared on Kouei Japan Trading | Get Quotation.


UNIKA TJ Type Cordless Drill Bit For Ceramic Tile
kvtpart — Fri, 13 Nov 2020 05:28:54 +0000
Manufacturer: UNIKA
Model: TJ type


■Cutting edge configuration dedicated to impact driver realizes abrasion resistance to tiles and durability.
■Integral configuration eliminates deflection and chatter of cutting edge, allowing for correct drilling.
■Can be used in either rotating or impact modes.
■Easily attached to various types of cordless drills in a single operation.

*This cannot be used for an vibration drill.









Uses

Porcelain tile•Roof tile•Ceramic tile• Slate•ALC•Plasterboard• Block•Brick•Mortar•Plastic



 3.0、E.5mm (32*10*145)" width="36" height="164" />


3.0-6.5mm

(32*10*145)










One-touch attachable to the impact driver



■Asymmetric cutting edge shape
Asymmetrical grinding of the ultra-hard tip of the cutting edge reduces cutting resistance, enabling work material drilling with low torque.

Application of special grind realizes abrasion resistance to tiles and durability.






*The hole drilling count varies depending on the type.





Use the specified drills only.
Make sure to turn off the main switch of the electric drill before attaching and detaching the drill bit.
Wear protective glasses.
Drill holes vertically against the drilled material surface.
Read the instruction manual for the electric drill before use and always observe instructions to ensure safe and correct operation.

SPECIFICATIONS


TJ type



Size
Dia(mm)


TJ3.0X90
3


TJ3.2X90
3.2


TJ3.4X90
3.4


TJ3.5X90
3.5


TJ3.8X95
3.8


TJ4.0X95
4


TJ4.3X95
4.3


TJ4.5X95
4.5


TJ4.8X95
4.8


TJ5.0X95
5


TJ5.3X100
5.3


TJ5.5X100
5.5


TJ6.0X100
6


TJ6.4X100
6.4


TJ6.5X100
6.5





The post UNIKA TJ Type Cordless Drill Bit For Ceramic Tile first appeared on Kouei Japan Trading | Get Quotation.


UNIKA DJW Type Cordless Diamond Core Bit
kvtpart — Fri, 13 Nov 2020 05:28:42 +0000
Manufacturer: UNIKA
Model: DJW Type(Semi-dry wax was enclosed)






When using the specially developed wax, no water cooling is required.
■ This special diamond production method is ideal on an impact electric driver.

Offers fast drilling and long life.
■ With the positioning guide, stable drilling is assured.

*The positioning guide is sold optionally.



◆Applicable Electric Tool: Cordless Drill / Driver Drill / Electric Drill(under 400W)
(663KB)


 
Smart phone and a tablet is here.





Uses

Ceramic tile•Stone material tile• Hard tile•Granite stone•Marble• Roof tile



 5.0?15.0mm (45×13×145)" width="71" height="172" />


5.0-15.0mm

(70*72*185)


 20.0?35.0mm (93×92×187)" width="81" height="172" />


20.0?35.0mm

(93×92×187)


*( ) The number inside is the package size. W*D*H(mm) As for size there is an the error of ±2mm depending upon the package.








■ Just apply the semi-dry wax to the drilling edge.
Due to the special cooling properties in the semi-dry wax, there is no need for using messy water when the wax is applied.





■ Drill Positioning Guide
Place the core drill bit in the V-slot and start drilling. While the drill is rotating, gently penetrate the material diagonally.

Once the diamond core drill bit totally penetrates the material 1-2 mm deep stop drilling and remove the guide. Then, continue drilling.



■ Drilling components



■ Hexagonal shank
Due to its 6.35mm HEX shank, stable holding and positioning is assured.







Use the electric drill appropriate for the drill bit used.
Make sure to turn off the main switch and take out the power supply plug from the socket before attaching and detaching the drill bit.
Attach the drill bit by pushing in until it stops at the end of the chucking part of the drill, and clamp the drill bit tightly so that it will not loosen or come off.
Wear protective glasses.
Drill holes vertically against the drilled material surface.
Read the instruction manual for the electrical drill before use and always observe instructions to ensure safe and correct operation.

SPECIFICATIONS

DJW Type(Semi-dry wax was enclosed)




Code
Diameter(mm)


DJW5.0X60S
5


DJW6.0X60S
6


DJW6.4X60S
6.4


DJW7.0X60S
7


DJW8.0X60S
8


DJW10.0X60S
10


DJW12.0X60S
12


DJW15.0X60S
15


DJW20.0X76S
20


DJW25.0X76S
25


DJW30.0X76S
30


DJW32.0X76S
32


DJW35.0X76S
35







Positioning Guide V


Code
Matching hole Diameter(mm)
JAN Code


DJW-PGD-V
5.0-35.0
4989270128040










During use and immediately after use, the core drill and cutting waste becomes very hot so take care of that to not touch it with bare hands.

In addition, after drilling porcelain shavings and used wax may be scattered around the work area, therefore prepare the surrounding area for it.




The post UNIKA DJW Type Cordless Diamond Core Bit first appeared on Kouei Japan Trading | Get Quotation.


UNIKA TR Type Ceramic Tile Drill Bit
kvtpart — Fri, 13 Nov 2020 05:28:39 +0000






Manufacturer: UNIKA
Model: TR type
■Ideal for drilling approximately 10 to 15 ceramic tiles.
■Uses a special ultra-hard tip to maintain drilling performance. Drills efficiently through even difficult materials.
■Even more outstanding cutting efficiency and durability is demonstrated if cooled using water when drilling.




◆Matching drill: Electric drill/Percussion drill(rotating mode)







Uses

Porcelain tile•Roof tile•Ceramic tile•Slate•ALC•Plasterboard•

Block•Brick•Mortar•Plastic








■Asymmetric cutting edge shape

Asymmetrical grinding the ultra-hard tip of the cutting edge reduces cutting resistance, enabling work material drilling with low torque.



■Appropriate rotation speed of electric drill used

■Chuck Size
Drill bit of all sizes attachable to the 10-mm chuck.
■Comparison of hole drilling count when water is used and not used

*The hole drilling count varies depending on the tile type.




 3.0-6.5mm (32*10*145)" width="31" height="145" />


3.0-6.5mm

(32*10*145)


 7.0-8.5mm (32*12*176)" width="31" height="176" />


7.0-8.5mm

(32*12*176)


 9.0-11.0mm (37*14*197)" width="36" height="197" />


9.0-11.0mm

(37*14*197)


*( ) The number inside is package size. W*D*H(mm). As for size there is the error of ±2mm depending upon the package.





For TR Type drill, use rotation mode only. Never use the vibration mode.
Be sure to turn off the main switch of the electrical drill and disconnect the power supply plug from the socket before attaching and detaching the drill bit.
Attach the drill bit by pushing in until it stops at the end of the chucking part of the drill, and clamp the drill bit tightly so it will not loosen or coming off.
Wear eye protection glasses.
Drill holes vertically against the drilled material surface.
Operate the drill with water being poured onto the tip of the drill bit used for cooling.
Read the instruction manual for the electrical drill used carefully before use and always observe those instructions to ensure safe and correct operation.


SPECIFICATIONS


TR type




Size
Dia(mm)


TR3.0X85
3


TR3.2X85
3.2


TR3.4X85
3.4


TR3.5X85
3.5


TR3.8X85
3.8


TR4.0X85
4


TR4.3X85
4.3


TR4.5X85
4.5


TR4.8X85
4.8


TR5.0X85
5


TR5.3X100
5.3


TR5.5X100
5.5


TR6.0X100
6


TR6.4X100
6.4


TR6.5X100
6.5


TR7.0X125
7


TR7.2X125
7.2


TR7.5X125
7.5


TR8.0X125
8


TR8.5X125
8.5


TR9.0X150
9


TR9.5X150
9.5


TR10.0X150
10


TR10.5X150
10.5


TR11.0X150
11





The post UNIKA TR Type Ceramic Tile Drill Bit first appeared on Kouei Japan Trading | Get Quotation.


UNIKA SB Type Stone Drill Bit
kvtpart — Fri, 13 Nov 2020 05:28:29 +0000






Manufacturer: UNIKA
Model: SB type
■Handles stone from general types to hard-to-drill granite with excellent cutting feel and durability.
■The “anti-slip” engraved on the shank realizes effective power transmission.
■Even more outstanding cutting efficiency and durability is demonstrated if cooled using water when drilling.




◆Matching drill: Percussion drill







Uses

Stone•Concrete•Mortar•Block•Brick•

Slate•Japanese wall








■Asymmetric cutting edge shape

Asymmetrical grinding the ultra-hard tip of the cutting edge reduces cutting resistance, enabling work material drilling with low torque.



■Appropriate rotation speed of electric drill used

■Chuck Size
Drill bit of all sizes attachable to the 10-mm chuck.




 3.0-6.4mm (32*10*145)" width="31" height="145" />


3.0-6.4mm

(32*10*145)


 7.0-8.0mm (32*12*176)" width="31" height="176" />


7.0-8.0mm

(32*12*176)


*( ) The number inside is package size. W*D*H(mm). As for size there is the error of ±2mm depending upon the package.





Use the electric drill specified by the drill bit.
Be sure to turn off the main switch of the electrical drill and disconnect the power supply plug from the socket before attaching and detaching the drill bit.
Attach the drill bit by pushing in until it stops at the end of the chucking part of the drill, and clamp the drill bit tightly so it will not loosen or coming off.
Wear eye protection glasses.
Drill holes vertically against the drilled material surface.
Read the instruction manual for the electrical drill used carefully before use and always observe those instructions to ensure safe and correct operation.


SPECIFICATIONS


SB type




Size
Dia(mm)


SB3.0X85BP
3


SB3.2X85BP
3.2


SB3.4X85BP
3.4


SB3.5X85BP
3.5


SB4.0X85BP
4


SB4.3X85BP
4.3


SB4.5X85BP
4.5


SB4.8X85BP
4.8


SB5.0X85BP
5


SB5.5X100BP
5.5


SB6.0X100BP
6


SB6.4X100BP
6.4


SB7.0X125BP
7


SB8.0X125BP
8







The post UNIKA SB Type Stone Drill Bit first appeared on Kouei Japan Trading | Get Quotation.


UNIKA UX SDS Plus Drill Bit
kvtpart — Fri, 13 Nov 2020 05:23:25 +0000
Manufacturer: UNIKA
Model: UX type, UX type long, UX type super long






■Adopts a cross blade for cutting edge that enables penetration through deck plates.
■Hole drilling at nearly perfect circles enabled. This realizes smooth anchor insertion.
■Cross blade less likely to become trapped with less wear of the cutting edge and outside diameter, when hitting against reinforcement bars. Stable drilling ability is maintained.




◆Matching drill: Rotary hammer drill







Uses

Deck plate + Concrete•Block•

Brick•Mortar•Japanese wall•Stone








■Cross blade penetrates through deck plate

The cross blade developed to enable penetration through deck plate reduces the cross angle and prevents a reduction in drilling speed with the 2-edge (main, auxiliary) construction.
Realizes hole drilling at nearly a perfect circle by proactively operating the auxiliary edge to outer circumference cutting.




■Hole drilling at nearly perfect circles realized

Adopts the cross blade for cutting edge that enables not only penetration through deck plates but also hole drilling close to a perfect circle. In addition, anchor insertion is smoothly performed and the vibration burden during work is reduced.



■Installation Example (Unicon Anchor)

Drill a hole above the deck plate at a specified hole diameter and to a specified hole depth.
Remove shavings with a dust collector or blower.
Strike a cone with a striking rod to set the anchor.
Screw a full thread bolt, etc. This completes installation.






 3.2?6.4mm (30*10*158)" width="30" />


3.2?6.4mm

Overall length

110mm

(30*10*158)


 3.4?5.5mm (30*10*212)" width="30" />


3.4?5.5mm

Overall length

160mm

(30*10*212)


 6.0-18.0mm (37*13*214)" width="36" />


6.0-18.0mm

(37*13*214)


*( ) The number inside is package size. W*D*H(mm). As for size there is the error of ±2mm depending upon the package.





Use the SDS chucking type electrical drills.
Use the drill in the “Hammering-in” mode only.
Be sure to turn off the main switch of the electrical drill and disconnect the power supply plug from the socket before attaching and detaching the drill bit.
Push in the drill bit until the locked position.
Wear eye protection glasses.
Drill holes vertically against the drilled material surface.
Read the instruction manual for the electrical drill used carefully before use and always observe those instructions to ensure safe and correct operation.


SPECIFICATIONS

UX type



Size
Dia(mm)


UX6.0X160
6


UX6.4X160
6.4


UX6.5X160
6.5


UX7.0X160
7


UX7.2X160
7.2


UX7.5X160
7.5


UX8.0X160
8


UX8.5X160
8.5


UX9.0X160
9


UX9.5X160
9.5


UX10.0X160
10


UX10.5X160
10.5


UX11.0X160
11


UX12.0X160
12


UX12.5X160
12.5


UX12.7X160
12.7


UX13.0X160
13


UX13.5X160
13.5


UX14.0X160
14


UX14.3X160
14.3


UX14.5X160
14.5


UX15.0X160
15


UX16.0X160
16


UX16.5X160
16.5


UX17.0X160
17


UX18.0X160
18




UX type long



Size
Dia(mm)


UXL8.0X210
8


UXL8.5X210
8.5


UXL9.0X210
9


UXL10.0X210
10


UXL10.5X210
10.5


UXL12.0X210
12


UXL12.5X210
12.5


UXL12.7X210
12.7


UXL14.0X210
14


UXL14.5X210
14.5


UXL15.0X210
15


UXL16.0X210
16


UXL17.0X210
17


UXL18.0X210
18


UXL19.0X210
19


UXL20.0X210
20






UXL10.0X260
10


UXL10.5X260
10.5


UXL12.0X260
12


UXL12.5X260
12.5


UXL12.7X260
12.7


UXL14.0X260
14


UXL14.5X260
14.5


UXL15.0X260
15


UXL16.0X260
16


UXL16.5X260
16.5


UXL17.0X260
17


UXL18.0X260
18


UXL19.0X260
19


UXL20.0X260
20


UXL22.0X260
22


UXL23.0X260
23


UXL24.0X260
24


UXL25.0X260
25


UXL26.0X260
26






UXL10.0X350
10


UXL10.5X350
10.5


UXL11.0X350
11


UXL12.0X350
12


UXL12.5X350
12.5


UXL12.7X350
12.7


UXL13.0X350
13


UXL14.0X350
14


UXL14.3X350
14.3


UXL14.5X350
14.5


UXL15.0X350
15


UXL16.0X350
16


UXL16.5X350
16.5


UXL17.0X350
17


UXL17.5X350
17.5


UXL18.0X350
18


UXL19.0X350
19


UXL20.0X350
20


UXL22.0X350
22


UXL23.0X350
23


UXL24.0X350
24


UXL25.0X350
25


UXL26.0X350
26






UXL10.0X450
10


UXL10.5X450
10.5


UXL12.0X450
12


UXL12.5X450
12.5


UXL13.5X450
13.5


UXL14.5X450
14.5


UXL16.0X450
16


UXL18.0X450
18


UXL19.0X450
19


UXL20.0X450
20


UXL22.0X450
22


UXL23.0X450
23


UXL24.0X450
24


UXL25.0X450
25


UXL26.0X450
26





UX type super long



Size
Dia(mm)


UXLL10.0X1000
10


UXLL12.0X1000
12


UXLL12.5X1000
12.5




TOOL BOX SET



The tool box set is also convenient for carrying and storing.

[SDS Plus drill bit UX set] Set of 10 [TB-21UX]


(Overall length: 110mm type)3.5/4.3/4.8/5.0mm*each 1
(Overall length: 160mm type)6.4/8.5/10.5/12.5/12.7/14.5mm*each 1
JAN Code: 4989270102989






The post UNIKA UX SDS Plus Drill Bit first appeared on Kouei Japan Trading | Get Quotation.


UNIKA HEX Type Hexagonal Shank Drill Bit
kvtpart — Fri, 13 Nov 2020 05:22:32 +0000
Manufacturer: UNIKA
Model: HEX type short, HEX type long, HEX type super long






■The drill bit exclusive to hammer drills enables efficient transfer of the hammering impact and the spinning force.
■The integral design from chuck section to cutting edge offers outstanding performance in piercing and deep drilling work.
■The range also includes bits for drilling holes for anchors, and bits for slope-finishing work, widely meeting work requirements.




◆Matching drill: Hammer drill
*For hole drilling of stone material, use a drill for stone





Use

Concrete•*Stone•Block•Brick•Mortar•

Slate•Japanese Wall







■Matching drill




Maker
Model



Hitachi
PR25B


DH35


PR-38E


DH42


DH40SA


DH40SR


DH45SA


Makita
HR3530


HR3520


HR3850


HR3811


HR4030C


Ryobi
ED-382NPA


ED-382NA


ED-383N







 10.0-22.0mm (32*23*325)" width="32" height="325" />


10.0-22.0mm

(32*23:325)


*( ) The number inside is package size. W*D*H(mm). As for size there is the error of ±2mm depending upon the package.


Use the drill appropriate for the drill bit used.
Be sure to turn off the main switch of the electrical drill and disconnect the power supply plug from the socket before attaching and detaching the drill bit.
Attach the drill bit by pushing in until it stops at the end of the chucking part of the drill, and clamp the drill bit tightly so it will not loosen or come off.
Wear eye protection glasses.
Drill holes vertically against the drilled material surface.
Read the instruction manual for the electrical drill used carefully before use and always observe those instructions to ensure safe and correct operation.


SPECIFICATIONS





HEX type short




                                                                                                Size
Dia


non-pack
Blister pack
(mm)


HEX10.0X280
HEX10.0X280BP
10


HEX10.5X280
HEX10.5X280BP
10.5


HEX11.0X280
HEX11.0X280BP
11


HEX12.0X280
HEX12.0X280BP
12


HEX12.5X280
HEX12.5X280BP
12.5


HEX12.7X280
HEX12.7X280BP
12.7


HEX13.0X280
HEX13.0X280BP
13


HEX13.5X280
HEX13.5X280BP
13.5


HEX14.0X280
HEX14.0X280BP
14


HEX14.3X280
HEX14.3X280BP
14.3


HEX14.5X280
HEX14.5X280BP
14.5


HEX15.0X280
HEX15.0X280BP
15


HEX16.0X280
HEX16.0X280BP
16


HEX16.5X280
HEX16.5X280BP
16.5


HEX17.0X280
HEX17.0X280BP
17


HEX17.5X280
HEX17.5X280BP
17.5


HEX18.0X280
HEX18.0X280BP
18


HEX19.0X280
HEX19.0X280BP
19


HEX20.0X280
HEX20.0X280BP
20


HEX21.5X280
HEX21.5X280BP
21.5


HEX22.0X280
HEX22.0X280BP
22


HEX22.5X280
–
22.5


HEX23.0X280
–
23


HEX24.0X280
–
24


HEX25.0X280
–
25


HEX25.5X280
–
25.5


HEX26.0X280
–
26


HEX26.5X280
–
26.5


HEX28.0X280
–
28


HEX28.5X280
–
28.5


HEX29.0X280
–
29


HEX30.0X280
–
30


HEX32.0X280
–
32


HEX35.0X280
–
35


HEX38.0X280
–
38


HEX40.0X280
–
40





HEX type long




Size
Dia (mm)


HEXL10.5X505
10.5


HEXL12.0X505
12


HEXL12.5X505
*12.5


HEXL12.7X505
12.7


HEXL14.3X505
14.3


HEXL14.5X505
14.5


HEXL15.0X505
15


HEXL16.0X505
16


HEXL16.5X505
*16.5


HEXL17.0X505
17


HEXL17.5X505
17.5


HEXL18.0X505
18


HEXL19.0X505
19


HEXL20.0X505
20


HEXL21.5X505
21.5


HEXL22.0X505
22


HEXL24.0X505
24


HEXL25.0X505
25


HEXL25.5X505
25.5


HEXL26.0X505
26


HEXL28.0X505
28


HEXL28.5X505
28.5


HEXL29.0X505
29


HEXL30.0X505
30


HEXL32.0X505
32


HEXL34.0X505
34


HEXL35.0X505
35


HEXL38.0X505
38


HEXL40.0X505
40





HEX type super long




Size
Dia(mm)


HEXLL14.3X600
14.3


HEXLL14.5X600
14.5


HEXLL16.0X600
16


HEXLL17.0X600
17


HEXLL17.5X600
17.5


HEXLL18.0X600
18


HEXLL19.0X600
19


HEXLL21.5X600
21.5


HEXLL22.0X600
22


HEXLL25.0X600
25


HEXLL14.3X800
14.3


HEXLL14.5X800
14.5


HEXLL16.0X800
16


HEXLL17.0X800
17


HEXLL17.5X800
17.5


HEXLL18.0X800
18


HEXLL19.0X800
19


HEXLL21.5X800
21.5


HEXLL22.0X800
22


HEXLL25.0X800
25


HEXLL14.3X1000
14.3


HEXLL14.5X1000
14.5


HEXLL16.0X1000
16


HEXLL17.0X1000
17


HEXLL17.5X1000
17.5


HEXLL18.0X1000
18


HEXLL19.0X1000
19


HEXLL21.5X1000
21.5


HEXLL22.0X1000
22


HEXLL25.0X1000
25









The post UNIKA HEX Type Hexagonal Shank Drill Bit first appeared on Kouei Japan Trading | Get Quotation.


UNIKA TP Type Taper Shank Drill Bit
kvtpart — Fri, 13 Nov 2020 05:22:10 +0000
Manufacturer: UNIKA
Model: Taper shank drill bit No.1 (short), Taper shank drill bit No.1 (long), Taper shank drill bit No.1 (long/for anchoring of slopes)




■All sizes can be interchanged using a single tapered-shank adaptor.
■Offering economy with productivity : ideal for all kinds of sites requiring drilling.

*For hole drilling of stone material, use a drill for stone.
◆Matching drill: Hammer drill




Use

Concrete•Stone•Block•Brick•Mortar•

Slate•Japanese wall








Use the drill appropriate for the drill bit used.
Be sure to turn off the main switch of the electrical drill and disconnect the power supply plug from the socket before attaching and detaching the drill bit.
Attach the drill bit by pushing in until it stops at the end of the chucking part of the drill, and clamp the drill bit tightly so it will not loosen or come off.
Wear eye protection glasses.
Drill holes vertically against the drilled material surface.
Read the instruction manual for the electrical drill used carefully before use and always observe those instructions to ensure safe and correct operation.


SPECIFICATIONS


Taper shank drill bit No.1 (short)




Size
Dia(mm)


TP6.4X100
6.4


TP6.5X100
6.5


TP7.0X100
7


TP7.5X100
7.5


TP8.0X115
8


TP8.5X115
8.5


TP9.0X115
9


TP9.5X115
9.5


TP10.0X120
10


TP10.5X120
10.5


TP11.0X120
11


TP12.0X120
12


TP12.5X120
12.5


TP12.7X120
12.7


TP13.0X120
13


TP13.5X120
13.5


TP14.3X120
14.3


TP14.5X120
14.5


TP14.7X120
14.7


TP16.0X130
16


TP16.5X130
16.5


TP17.0X130
17


TP17.5X130
17.5


TP18.0X130
18


TP19.0X160
19


TP21.5X160
21.5


TP22.0X160
22





Taper shank drill bit No.1 (long)




Size
Dia(mm)


TPL10.0X280
10


TPL10.5X280
10.5


TPL11.0X280
11


TPL12.0X280
12


TPL12.5X280
12.5


TPL12.7X280
12.7


TPL13.0X280
13


TPL13.5X280
13.5


TPL14.0X280
*14.0


TPL14.3X280
14.3


TPL14.5X280
14.5


TPL15.0X280
*15.0


TPL16.0X280
16


TPL17.0X280
17


TPL17.5X280
17.5


TPL18.0X280
18


TPL19.0X280
*19.0


TPL20.0X280
*20.0


TPL21.5X280
*21.5


TPL22.0X280
*22.0





Taper shank drill bit No.1 (long/for anchoring of slopes)




Size
Dia(mm)


TPSB10.0X280
10


TPSB10.5X280
10.5


TPSB11.0X280
11


TPSB12.0X280
12


TPSB12.5X280
12.5







Adapter


Size
Overall Length(mm)
Shank
Cotter
Pcs./box
JAN Code


No.1
158
HEX
attached
6
4989270070004


No.1-SDS
120
SDS
none
1
4989270100008



*No. 1 = Morse taper (MT-1)


Cotter


JAN Code


4989270070028





*Used for detaching bits.





The post UNIKA TP Type Taper Shank Drill Bit first appeared on Kouei Japan Trading | Get Quotation.


UNIKA AS Type Weld Anchor
kvtpart — Fri, 13 Nov 2020 05:16:24 +0000
Manufacturer: UNIKA
Model: AS type




■Weld anchor for use by hammering into target object and attaching equipment fixture by direct welding.
■Ideal for sash window frame retainers.





Uses

Concrete•Stone




Drill preparation hole.
Position anchor.
Strike with hammer.
Anchor attached with open legs.




■Uses
Attachment or repair work on sash or shutter frames.



Wear safety protection equipment such as eye protection glasses, a helmet, etc. during use.
Be sure to use the drill of the appropriate size to secure proper strength for drilling the preparation hole.
Drill the preparation hole vertically against the drilled material surface.
Blow the hole thoroughly to remove shavings inside.


SPECIFICATIONS


AS type




Size
Dia(mm)


AS-1040
10


AS-1045


AS-1050


AS-1055


AS-1060







The post UNIKA AS Type Weld Anchor first appeared on Kouei Japan Trading | Get Quotation.


UNIKA TL/TLS Type T-Lock
kvtpart — Fri, 13 Nov 2020 05:16:13 +0000
Manufacturer: UNIKA
Model: TL type (Trivalent chrome treatment), TLS type (Stainless steel), Drill for T-lock (For extrusion molding plate)




■As the main body diameter and the plate width are the same, anchoring is possible by drilling from above the fixture.
■TLS type is completely made of stainless steel which is resistant to rust. Used extensively even in humid places.



Check necessary hollow width on the back of wall when installing.







Thread diameter
Tightening torque


M6
2.5 N•m


M8
6.5 N•m


M10
10.0 N•m


M12
20.0 N•m





Uses

Hollow wall•Extruded cement panel




Drill holes of the determined preparation hole diameter.
Insert the T-lock into the preparation hole.
The plate becomes vertical and can be fixed.
Tighten equipment with a nut to complete installation





■Uses
Installation of bracket, equipment and handrail.

SPECIFICATIONS

TL type (Trivalent chrome treatment)\



Size
Thread size
Dia(mm)


TL-630
M6
7


TL-640


TL-650


TL-835
M8
8


TL-840


TL-845


TL-850


TL-855


TL-860


TL-865


TL-870


TL-875


TL-880


TL-890


TL-810


TL-1050
M10
10


TL-1070


TL-1090


TL-1010


TL-1250
M12
12


TL-1270


TL-1210





TLS type (Stainless steel)




Size
Thread size
Dia(mm)


TLS-630
M6
7


TLS-640


TLS-650


TLS-840
M8
8


TLS-850


TLS-860


TLS-870


TLS-880


TLS-890


TLS-810


TLS-1050
M10
10


TLS-1070


TLS-1090


TLS-1010


TLS-1250
M12
12


TLS-1270


TLS-1210




Drill for T-lock (For extrusion molding plate)



Size
Anchor size
Dia(mm)


TLD-7.5
M6
7.5


TLD-9.0
M8
9


TLD-11.0
M10
11


TLD-13.5
M12
13.5




The post UNIKA TL/TLS Type T-Lock first appeared on Kouei Japan Trading | Get Quotation.


UNIKA NP/NPS Type NP Anchor
kvtpart — Fri, 13 Nov 2020 05:14:09 +0000
Manufacturer: UNIKA
Model: NP type, NPS type (Stainless Steel Screw)




■Easy operation simply by hammering in. Enables attachment without the use of wood screws or plugs.
■Body is made of nylon, eliminating corrosion worries.





Uses

Concrete•Block•Stone




Drill preparation hole.
Position NP anchor.
Strike pin with hammer.
NP anchor attached with open legs.




■Uses
Attaching wiring boards, saddle bands, and lighting fixtures, coping and signboard attachment.



Preparation holes should be slightly deeper than the below-head length.
Not to be used for attaching heavy objects to ceiling surfaces.


SPECIFICATIONS

NP type



Size
Dia(mm)


NP-425
4


NP-535
5


NP-640
6





NPS type (Stainless Steel Screw)




Size
Dia(mm)


NPS-535
5


NPS-640
6


NPS-650





The post UNIKA NP/NPS Type NP Anchor first appeared on Kouei Japan Trading | Get Quotation.


UNIKA NBA Type NP ALC Anchor
kvtpart — Fri, 13 Nov 2020 05:14:02 +0000
Manufacturer: UNIKA
Model: NBA type (NP ALC Anchor)




■Tapped anchor specially for ALC panels, with 3-stage protrusions boasting high pull-out strength and retaining strength.
■Excellent weather and heat resistance. Unique corrosion resistant nylon design.





Uses

ALC




Drill preparation hole.
Position anchor.
Hammer in pin using special striking rod.
Installation complete.




■Uses
For attaching fixtures and equipment to ALC panel.



Wear safety protection equipment such as eye protection glasses, a helmet etc. during use.
Be sure to use the drill of the appropriate size to secure proper strength for drilling the preparation hole.
Drill the preparation hole vertically against the drilled material surface.
Blow the hole thoroughly to remove shavings inside.
Use the attached striking rod.
SPECIFICATIONS
NBA type (NP ALC Anchor)




Size
Bolt size
Hole dia(mm)


NBA-859
M8
11.5


NBA-1060
M10
14


NBA-2559
W5/16
11.5


NBA-3860
W3/8
14







The post UNIKA NBA Type NP ALC Anchor first appeared on Kouei Japan Trading | Get Quotation.


UNIKA NON-Plug Screw
kvtpart — Fri, 13 Nov 2020 05:10:54 +0000
Manufacurer: UNIKA
Model: Silver color (no drill), Silver color, Stainless (no drill), Stainless




■Requires no plugs. Can be used to screw directly into concrete, and can be attached simply by using a normal screwdriver.
■3 screw head types : flat head, pan head and pan washer head.
■Also newly released “Silver type” with anti corrosion coating treatment.







Uses

Concrete•Block•Brick




Drill preparation hole.
Position anchor.
Screw in no-plug screw using screwdriver.
Installation complete.








Pack size (mm) 80 (W) × 130 (H) × 40 (D)


■Uses
All kinds of attachments including pipe saddle retainers, switch boxes, curtain rails, storage units, air-conditioning equipment, lighting fixtures, and interior underground materials.
■Max. Extraction Strength of Non-Plug Screw 425 (Pan Head)



Concrete FC=21N/mm²
Block
Brick


2.2kN
1.3kN
1.1kN



*For installation, consider the safety ratio of one-third to one-fourth.


■Prepared Hole Drill Diameter



Non-Plug Screw Diameter
Concrete
Block
Brick


4-mm Type
3.5mm
3.5mm
3.2mm


5-mm Type
4.3mm
4.3mm
4.0mm


6-mm Type
5.5mm
5.5mm
5.0mm





•Pan washer head
Washer faced type with no washer required. Improves the holding force and installation efficiency.







Wear safety protection equipment such as eye protection glasses, a helmet, etc. during use.
Be sure to use the drill of the appropriate size to secure proper strength for drilling the preparation hole.
Drill the preparation hole vertically against the drilled material surface.
Blow the hole thoroughly to remove shavings inside.


SPECIFICATIONS


Silver color (no drill)




Size
Head
Dia(mm)


P-425-SDN
Pan head
4


P-432-SDN


P-438-SDN


P-525-SDN
5


P-535-SDN


P-545-SDN


P-560-SDN


P-570-SDN


F-425-SDN
Flat head
4


F-432-SDN


F-438-SDN


F-445-SDN


F-525-SDN
5


F-535-SDN


F-545-SDN


F-560-SDN


F-570-SDN


F-635-SDN
6


F-645-SDN


F-660-SDN


F-670-SDN


F-675-SDN


F-690-SDN


PW-425-SDN
Pan washer head
4


PW-432-SDN




Silver color




Size
Head


P-425B-S
Pan head


P-432B-S


P-438B-S


F-425B-S
Flat head


F-432B-S


F-438B-S


PW-425B-S
Pan washer head


PW-432B-S





Stainless (no drill)




Size
Head
Dia(mm)


PS-425DN
Pan head
4


PS-432DN


PS-438DN


PS-525DN
5


PS-535DN


PS-545DN


PS-560DN


PS-570DN


FS-425DN
Flat head
4


FS-432DN


FS-438DN


FS-525DN
5


FS-535DN


FS-545DN


FS-560DN


FS-570DN


PWS-425DN
Pan washer head
4


PWS-432DN





Stainless




Size
Head


PS-425B
Pan head


PS-432B


PS-438B


FS-425B
Flat head


FS-432B


FS-438B


PWS-425B
Pan washer head


PWS-432B






ANCHOR CASE SET



For the set contents, please feel free to contact us.

[Non-plug screw box set]


Non-plug screw P-425-SDN × 1,000 pcs
SDS plus drill bit 3.4 mm × 10 pcs.









The post UNIKA NON-Plug Screw first appeared on Kouei Japan Trading | Get Quotation.


UNIKA NA Type Hollow Plug
kvtpart — Fri, 13 Nov 2020 05:10:09 +0000
Manufacturer: UNIKA
Model: NA type (Blister pack), NA type (Blister pack with screw), NA type (Blister pack with stainless screw), NA type (Blister pack in economy cartons)




■For thick or thin walls more than 3mm thick. This is the plug for hollow construction walls.
■Unique nylon construction eliminates worries about corrosion, without destroying appearance.
■Excellent heat and cold resistance – does not fracture even when impacted at -30°C.





Drill preparation hole.
Insert plug.
Attach with wood screw.

OK even for thick walls.




Uses

Hollow wall•Concrete•Block•Brick





■Uses
For attaching fixtures and equipment.



Wear safety protection equipment such as eye protection glasses, a helmet etc. during use.
Never apply the anchor plug for walls under 3mm thick.
Be sure to use the drill of the appropriate size to secure proper strength for drilling the preparation hole.
Drill the preparation hole vertically against the drilled material surface.


SPECIFICATIONS


NA type (Blister pack)




Size
Board thickness(mm)


NA-3P
8-Mar


NA-9P
15-Sep


NA-16P
16-24





NA type (Blister pack with screw)




Size
Attached Screw(mm)


NA-3SP
Pan 4*35


NA-9SP
Pan 4*40





NA type (Blister pack with stainless screw)




Size
Attached Screw(mm)


NA-3SPS
Pan 4*35


NA-9SPS
Pan 4*40





NA type (Blister pack in economy cartons)




Size
Pcs./box
Packs./box
JAN Code


NA-3
100
600
4.98927E+12


NA-9
4.98927E+12


NA-16
4.98927E+12








The post UNIKA NA Type Hollow Plug first appeared on Kouei Japan Trading | Get Quotation.


UNIKA B/BS Rooty Set Anchor
kvtpart — Fri, 13 Nov 2020 05:01:59 +0000
Manufacturer: UNIKA

Model: B type/M (Chromate Plating)/ B type/W (Chromate Treatment)/ BS type/M (Stainless)/ Hammering tool




■Highly reliable threaded type anchor that extends in response to load.
■Offers stable strength, since nut is tightened after fastening with striking rod.





Thread dia
Tightening Torque


M6, W1/4
5 N・m


M8, W5/16
12 N・m


M10, W3/8
24 N・m


M12, W1/2
42 N・m


M16, W5/8
100 N・m


M20, W3/4
200 N・m


M22, W7/8
280 N・m


M24, W1
360 N・m






USES

Concrete




Drill preparation hole.
Position anchor.
Hammer in with striking rod.
Complete attachment by tightening nut.




■Uses
Machine installation, soundproof walls/air-conditioning equipment/signboard attachment, and elevator construction work, etc.



Wear safety protection equipment such as eye protection glasses, a helmet, etc. during use.
Be sure to use the drill of the appropriate size to secure proper strength for drilling the preparation hole.
Drill the preparation hole vertically against the drilled material surface.
Blow the hole thoroughly to remove shavings inside.





JCAA Product Certification Mark
Products with this certification mark satisfy the evaluation and certification standards specified

by the Japan Construction Anchor Association (JCAA).



 
SPECIFICATION
B type/M (Chromate Plating)



Size
Thread size
Size
Thread size


B-650
M6
B-16100
M16


B-865
M8
B-16120


B-1070*
M10
B-16125*


B-1080*
B-16160*


B-10100
B-20170
M20


B-10120
B-20200


B-10150
B-22200
M22


B-12100*
M12
B-24200
M24


B-12120*



B-12125*


B-12160*


B-12200




B type/W (Chromate Treatment)



Size
Thread size


B-3070*
W3/8


B-3080*


B-40100
W1/2



 
BS type/M (Stainless)



Size
Thread size
Size
Thread size


BS-650
M6
BS-16100
M16


BS-865*
M8
BS-16120


BS-1070*
M10
BS-16125


BS-1080*
BS-16160


BS-10100
BS-20170
M20


BS-10120
BS-20200


BS-10150
BS-22200
M22


BS-12100*
M12
BS-24200
M24


BS-12120



BS-12125


BS-12160


BS-12200




Hammering tool



Part No.
 Anchor size


28B
M6, W1/4


258B
M8, W5/16


38B
M10, W3/8


48B
M12, W1/2


58B
M16, W5/8


68B
M20, W3/4


78B
M22, W7/8



The post UNIKA B/BS Rooty Set Anchor first appeared on Kouei Japan Trading | Get Quotation.


UNIKA BGL/BGSL/BGL-D Big One
kvtpart — Fri, 13 Nov 2020 04:53:30 +0000
Manufacturer: UNIKA

Model: BGL type (Unichrome treatment)/ BGSL type (Stainless steel)/ BGL-D type (Hot-dip galvanization)/ Big One high nut exclusive hammering rod (SDS for machine hammering)/ Torque Wrench for Big One (Tightening only)/ Big One safety work set/ Big One safety work set/ Big One BGL bucket set




■Demonstrates reliable strength for installation of suspension objects by installation by torque control and large three-sided wedge.
■Reliable installation can be visually checked by holed different diameter high nut.
■Installation is also easy with small diameter preparation hole because thread diameter and preparation hole diameter are the same.
■Expands while following up the load and demonstrates stable strength.
■Working efficiency is also increased by an exclusive hammering rod.




 
USES

Concrete•Stone






Drill vertically to target surface with the determined preparation diameter and preparation hole depth.
Use a dust collector or blower to thoroughly remove chips in the hole.
Hammer in until the washer contacts the installed object.
Use a torque wrench to tighten the nut to the specified torque value.
The three-sided wedge expands and installation is completed.







Wear safety protection equipment such as protective glasses, a helmet etc., during installation.
Use a dust collector or blower to thoroughly remove chips in the hole.
Select overall length of anchor in consideration of thickness of installed object.
Align the end face of the nut with the end of the tape to set.
For installation, use a torque wrench to tighten to the specified torque.







Before installation
Set the anchor on a position where the head of the anchor body starts to be seen from the nut hole.





Installation check
Unless installed with the specified preparation hole diameter and preparation hole depth, torque cannot be applied and the installation is made improperly. Check the preparation hole diameter and install in another position.





■Structural Drawing

■Uses
Installation of suspension object


■Tightening torque (different diameter high nut)



Thread

nominal

diameter
M10
M12


Width

across

flat
14mm
19mm


Tightening

torque
30N•m
45N•m











JCAA Product Certification Mark
Products with this certification mark satisfy the evaluation and certification standards specified

by the Japan Construction Anchor Association (JCAA).



 
SPECIFICATION
BGL type (Unichrome treatment) – BGSL type (Stainless steel) – BGL-D type (Hot-dip galvanization) – Big One high nut exclusive hammering rod (SDS for machine hammering)



Size
Dia (outside diameter)

Size
Dia (outside diameter)

Size
Dia (outside diameter)

Size
Anchor size(mm)


BGL-3070M*
M10
BGSL-3070M*
M10
BGL-3070D
M10
NBG-30SD
BGL-3070M/BGSL-3070M/BGL-3070D


BGL-4080M*
M12
BGSL-4080M*
M12


NBG-40SD
BGL-4080M/BGSL-4080M











Set the high nut at the specified height to tap.
When hammering, press the rotation stop bar against the handle of the motor, and use in a fixed state.
Make sure to tighten to the specified torque value using a torque wrench after hammering.

*Note that some hammering rods cannot be used on the wedge type anchors (high nut) of other makers.



 
Torque Wrench for Big One (Tightening only)



Size
Tightening torque (N・m)


TBG-33045
30/45











Use for tightening only.
When the proper tightness is reached using the torque wrench, there should be a click sound. At that time the proper tightness is achieved. Do not tighten any further, stop rotating and applying force at that time.

*The torque wrench has two settings (30N/m and 45N/m) which should be used depending on the wedge anchor size. Initially when you open the box the wrench is set at the 30N/m setting. Adjust it to the proper setting after you select the anchor.



 Big One safety work set



Size
Anchor product No.


BC-01
BGL-3070M(30 pcs.)


BC-02
BGL-3070M(30 pcs.)


BC-03
BG-1070(30 pcs.)




Big One safety work set



Size
Width across flat (mm)


3S-14L
14


3S-17L
17


3S-19L
19


3S-17
17


3S-19
19




Big One BGL bucket set



Size
Anchor product No.


BB-05
BGL-3070M(150 pcs.)


BB-02
BGL-4080M(60 pcs.)


BB-03
BGL-3070M(150 pcs.)



The post UNIKA BGL/BGSL/BGL-D Big One first appeared on Kouei Japan Trading | Get Quotation.


UNIKA BGS Stainless Steel Big One
kvtpart — Fri, 13 Nov 2020 04:30:21 +0000
Manufacturer: UNIKA

Model: BGS type (Stainless steel)/ BIG ONE Hammering tool(Machine) [SDS type]/ Different diameter high nut for Big One (Unichrome treatment)/ Different diameter high nut for Big One (Stainless steel)



■Demonstrates reliable strength by installation with torque control and three-sided wedges.

■Overall length can be checked after installation by marking on the head.

■BGS type is completely made of stainless steel which is resistant to rust.

Used extensively even in humid places.



USES

Concrete•Stone






Drill vertically to target surface with the determined preparation diameter and preparation hole depth.
Use a dust collector or blower to thoroughly remove chips in the hole.
Insert a big one.
Hammer in until the washer contacts the installed object.
Use a torque wrench to tighten the nut to the specified torque value.
The three-sided wedge expands and installation is completed.







Wear safety protection equipment such as protective glasses, a helmet etc., during installation.
Use a dust collector or blower to thoroughly remove chips in the hole.
Select overall length of anchor in consideration of thickness of installed object.
Align the end face of the nut with the end of the tape to set.
For installation, use a torque wrench to tighten to the specified torque.




■Structural Drawing





■Uses
Electrical, plumbing, air-conditioning / heating duct works, elevator construction work, elevator installation work.



■Tightening torque



Thread

nominal

diameter
M8
M10
M12
M16


Width

across

flat
13mm
17mm
19mm
24mm


Tightening

torque
15N•m
30N•m
45N•m
100N•m



■Marking on head



Overall

length(mm)
60
70
80
90
100
120


Marking
B
C
D
E
F
H










Before installation
Install it after aligning the nut with the taper end section on the head of the anchor body.





Installation check
If the thread section is protruded by a height of one nut or more when the nut is tightened, it has been improperly installed. Check the preparation hole diameter and install in another position.








JCAA Product Certification Mark
Products with this certification mark satisfy the evaluation and certification standards specified

by the Japan Construction Anchor Association (JCAA).



 









Set a nut on the specified position before hammering.
After hammering, make sure to tighten the nut with a torque wrench to the specified torque.
It cannot be used for BGL type.










 
SPECIFICATION
BGS type (Stainless steel)                                                     BIG ONE Hammering tool(Machine) [SDS type] 



Size
Dia (outside diameter)

Size
Matching anchor thread dia.


BGS-860
M8
BG-SD
M8,M10,M12


BGS-1070
M10
BG-16SD
M16


BGS-1080



BGS-1090


BGS-1280
M12


BGS-1290


BGS-1210


BGS-1212


BGS-1612
M16




Different diameter high nut for Big One (Unichrome treatment) – Different diameter high nut for Big One (Stainless steel)



Size
Thread diameter (outside diameter)

Size
Thread diameter (outside diameter)


NBG-3010M
W3/8*M10
NBGS-3010M
W3/8*M10


NBG-4012M
W1/2*M12
NBGS-4012M
W1/2*M12



The post UNIKA BGS Stainless Steel Big One first appeared on Kouei Japan Trading | Get Quotation.


UNIKA BG/BG-D Big One
kvtpart — Fri, 13 Nov 2020 04:19:57 +0000
Manufacturer: UNIKA

Model: BG type (Unichromate treatment)/ BG-D type (Hot-dip galvanizing treatment) Wedge: Stainless steel/ BIG ONE Hammering tool(Machine) [SDS type]/ Different diameter high nut for Big One (Unichrome treatment)/ Different diameter high nut for Big One (Stainless steel)



■Demonstrates reliable strength by installation through torque control and three-sided wedges.

■Demonstrates reliable installation strength with the torque control of the three-sided wedges. Installation can be done by either sides of the anchor as the diameter is the same.

■Overall length can be checked after installation by marking on the head.




USES

Concrete•Stone






Drill vertically to target surface with the determined preparation diameter and preparation hole depth.
Use a dust collector or blower to thoroughly remove chips in the hole.
Insert a big one.
Hammer in until the washer contacts the installed object.
Use a torque wrench to tighten the nut to the specified torque value.
The three-sided wedge expands and installation is completed.







Wear safety protection equipment such as protective glasses, a helmet etc., during installation.
Use a dust collector or blower to thoroughly remove chips in the hole.
Select overall length of anchor in consideration of thickness of installed object.
Align the end face of the nut with the end of the tape to set.
For installation, use a torque wrench to tighten to the specified torque.




■Structural Drawing





■Uses
Electrical, plumbing, air-conditioning / heating duct works, elevator construction work, elevator installation work.



■Tightening torque



Thread

nominal

diameter
M8
M10
M12
M16


Width

across

flat
13mm
17mm
19mm
24mm


Tightening

torque
15N•m
30N•m
45N•m
100N•m



■Marking on head



Overall

length(mm)
60
70
80
90
100
120
140
150


Marking
B
C
D
E
F
H
J
K










Before installation
Install it after aligning the nut with the taper end section on the head of the anchor body.





Installation check
If the thread section is protruded by a height of one nut or more when the nut is tightened, it has been improperly installed. Check the preparation hole diameter and install in another position.








JCAA Product Certification Mark
Products with this certification mark satisfy the evaluation and certification standards specified

by the Japan Construction Anchor Association (JCAA).










Set a nut on the specified position before hammering.
After hammering, make sure to tighten the nut with a torque wrench to the specified torque.
It cannot be used for BGL type.














SPECIFICATION
BG type (Unichromate treatment)                       BG-D type (Hot-dip galvanizing treatment) Wedge: Stainless steel



Size
Dia (outside diameter)

Size
Dia (outside diameter)


BG-860
M8
BG-1080D
M10


BG-870
BG-1090D


BG-1070
M10
BG-1290D
M12


BG-1080
BG-1210D


BG-1090
BG-1212D


BG-1010
BG-1612D
M16


BG-1280
M12



BG-1290


BG-1210


BG-1212


BG-1215


BG-1612
M16


BG-1614




BIG ONE Hammering tool(Machine) [SDS type]



Size
Matching anchor thread dia.


BG-SD
M8,M10,M12


BG-16SD
M16




Different diameter high nut for Big One (Unichrome treatment)/ Different diameter high nut for Big One (Stainless steel)



Size
Thread diameter (outside diameter)

Size
Thread diameter (outside diameter)


NBG-3010M
W3/8*M10
NBGS-3010M
W3/8*M10


NBG-4012M
W1/2*M12
NBGS-4012M
W1/2*M12



The post UNIKA BG/BG-D Big One first appeared on Kouei Japan Trading | Get Quotation.


UNIKA CA/CAS Rooty Cut Anchor
kvtpart — Fri, 13 Nov 2020 04:01:44 +0000
Manufacturer: UNIKA

Model: CA type (Chromate Treatment)/ CA type/M (Chromate Treatment)/ CAS type (Stainless)/ CAS type/M (Stainless)/ Hammering tool




■Most common, high-reliability tapped anchors.
■Enables installation of hexagonal bolts, push-in fittings, suspension bolts without protrusions from concrete surface after installation.





Thread dia
Tightening Torque


M6, W1/4
4 N•m


M8, W5/16
10 N•m


M10, W3/8
20 N•m


M12, W1/2
35 N•m


M16, W5/8
85 N•m


M20, W3/4
160 N•m


M22, W7/8
230 N•m





USES

Concrete






Drill preparation hole.
Position anchor.
Hammer in with striking rod.
Attachment complete.




■Installation explanatory video

https://koueitrading.com/global/wp-content/uploads/2020/11/03_anc_CA.mp4
■Uses
Air-conditioning work, signboard, interior/exterior works, electrical installation work, wiring work etc.



Wear safety protection equipment such as eye protection glasses, a helmet, etc. during use.
Be sure to use the drill of the appropriate size to secure proper strength for drilling the preparation hole.
Drill the preparation hole vertically against the drilled material surface.
Make sure to use a hammering rod appropriate for the product size to ensure reliable installation.
Blow the hole thoroughly to remove shavings inside.





JCAA Product Certification Mark
Products with this certification mark satisfy the evaluation and certification standards specified

by the Japan Construction Anchor Association (JCAA).



 
SPECIFICATION
CA type (Chromate Treatment)                                             CA type/M (Chromate Treatment)



Size
Thread Size

Size
Thread Size


28CA
W1/4
6CA
M6


258CA*
W5/16
8CA*
M8


38CA-12R (30L)
W3/8
10CA*
M10


38CA-12R
12CA*
M12


38CA*
16CA*
M16


48CA*
W5/8
20CA
M20


58CA*
W5/8
22CA
M22


68CA
W3/4



78CA
W7/8




CAS type (Stainless)                                               CAS type/M (Stainless)



Size
Thread Size

Size
Thread Size


28CAS
W1/4
6CAS
M6


258CAS*
W5/16
8CAS*
M8


38CAS*
W3/8
10CAS*
M10


48CAS*
W1/2
12CAS*
M12


58CAS*
W5/8
16CAS*
M16


68CAS
W3/4
20CAS
M20


78CAS
W7/8
22CAS
M22




Hammering tool



Size
Anchor size


28C
M6, W1/4


258C
M8, W5/16


38C
M10, W3/8


48C
M12, W1/2


58C
M16, W5/8


68C
M20, W3/4


78C
M22, W7/8



The post UNIKA CA/CAS Rooty Cut Anchor first appeared on Kouei Japan Trading | Get Quotation.


UNIKA UC/UCS/UC-D Unicon Anchor
kvtpart — Fri, 13 Nov 2020 03:44:53 +0000
Manufacturer: UNIKA

Model: UC type (Unichromate Treatment)/ UC type/M (Chromate Treatment)/ UCS type (Stainless)/ UC-D type (Hot-dip galvanization)/ Hammering tool (Hand)/ Hammering tool (Machine)/ Unicon anchor bucket set
■The leading tapping anchor boasting a large contact area and excellent tensile strength.

■Operating performance is improved by the small preparation hole bore due to the collar outer diameter being narrower than the tap diameter. Overhead installation is also easier.

■Features inner cone. Eliminates loss of cone during installation or “drop-out” after installation.







Thread dia
Tightening Torque


W1/4
4 N•m


M8, W5/16
10 N•m


W3/8

(1030/3030B)
20 N•m

(10 N•m)


W1/2
35 N•m






USES
Concrete






Drill preparation hole.
Position anchor.
Strike cone with striking rod to set anchor.
Secure fixture with bolt.




■Installation explanatory video
https://koueitrading.com/global/wp-content/uploads/2020/11/02_anc_UC.mp4
■Uses
Electrical, plumbing, air-conditioning/heating works.



JCAA Product Certification Mark
Products with this certification mark satisfy the evaluation and certification standards specified

by the Japan Construction Anchor Association (JCAA).



 
SPECIFICATION
UC type (Unichromate Treatment)                UC type/M (Chromate Treatment)                    UCS type (Stainless)



Size
Thread dia

Size
Thread dia

Size
Thread dia


UC-2025
W1/4
UC-830*
M8
UCS-3030B
W3/8


UC-2530*
W5/16
UC-1030
M10
UCS-3040*


UC-3030B
W3/8

UCS-4050*
W1/2


UC-3040*



UC-4050*
W1/2




UC-D type (Hot-dip galvanization)                  Hammering tool (Hand)                                       Hammering tool (Machine)



Size
Thread dia

Size
Anchor size Part No.

Size
Anchor size Part No.


UC-3030D
W3/8
PT-20
UC-2025
SD-30
UC-3040



PT-25
UC-2530/830
SD-30X500


PT-30
UC-3040
SD-30X1000


PT-30X1000
SD-30S
UC-3030B/1030


PT-30S
UC-3030B/1030
SD-30SX500


PT-30SX1000
SD-30SX1000


PT-40
UC-4050
SD-40
UC-4050




Unicon anchor bucket set



Part No.
Anchor Part No.


UB-01
UC-3030B(500 pcs.)


UB-02
UC-3040(500 pcs.)


UB-03
UCS-3030B(200 pcs.)


UB-05
UC-3030B(500 pcs.)


Part No.
Anchor Part No.


UB-21
UC-3030B(500 pcs.)



The post UNIKA UC/UCS/UC-D Unicon Anchor first appeared on Kouei Japan Trading | Get Quotation.


UNIKA T/Y/ST Rooty Anchor
kvtpart — Fri, 13 Nov 2020 03:27:20 +0000
Manufacturer: UNIKA

Model: T type (Unichromate Treatment)/ ST type (Stainless)/ Y type (Unichromate Treatment)
■Simply hammer in the pin. Ideal as anchors for lightweight items such as saddle bands or flat bands.

■T-Type : pan head, Y-Type : flat head, ST-Type : corrosion resistant stainless steel types


USES

Concrete•Block




Drill preparation hole.
Position anchor.
Strike pin with hammer.
Anchor attached with open legs.

(same for T, Y, ST types)




■Uses
For attaching wiring, pipe saddle stop attachment, flat bar attachment, non-slip attachment and fixtures.



Protective clothing including safety glasses and helmets must always be worn when installing.
Drill hole must be 5mm deeper than insertion depth.

SPECIFICATION
T type (Unichromate Treatment)               ST type (Stainless)



Size
Dia (outside diameter)

Size
Dia (outside diameter)


T-420
4
ST-420
4


T-425
ST-425



T-525
5
ST-525
5


T-530
ST-530



T-630
6
ST-630
6


T-640
ST-640



T-650
ST-645



T-660
ST-650



T-840
8
ST-660






Y type (Unichromate Treatment)




Size
Dia (outside diameter)


Y-420
4


Y-425





The post UNIKA T/Y/ST Rooty Anchor first appeared on Kouei Japan Trading | Get Quotation.


UNIKA C-D Hot Dip Galvanizing Anchor
kvtpart — Fri, 13 Nov 2020 03:17:16 +0000
Manufacturer: UNIKA

Model: C-D type M screw (Hot-dip galvanization)
■Simply hammer in the pin. Just by looking at the pin, completion of an anchor can be confirmed.

■Screw diameter and anchor unit diameter are the same, allowing for drilling after installation of equipment and anchoring without rattle.

■The C-D type is dip-brazed, which is excellent in corrosion resistance.







Thread dia
Tightening Torque


M6
5 N・m


M8
12 N・m


M10
24 N・m


M12
42 N・m


M16
100 N・m


M20
200 N・m





USES

Concrete






Drill a hole of a determined preparation hole diameter and depth from above the base material.
Remove chips by dust collector or blower.
Set the anchor and strike the pin with a hammer or the like.
Tighten the nut with a spanner to complete the work.




■Installation explanatory video

https://koueitrading.com/global/wp-content/uploads/2020/11/01_anc_C-1.mp4
■Uses
Suited for all kinds of fixture attachments including construction, electrical, sanitation, air conditioning / sign board attachment, seat attachment, and machine installation works.
■Structural Drawing

■Use examples




Protective clothing including safety glasses and helmets must always be worn when installing.
Drill perpendicularly into target surface.
Compared with anchor insertion depth, drill holes should be 5mm deeper for M6, M8, M10; 7mm deeper for M12; 10mm deeper for M16; 15mm deeper for M20.
Drilling preparation holes to shallow will break or bend a spindle.
Sufficiently use blower.
Always set nut before hammering.
Use a hammer appropriate for the anchor size.

SPECIFICATION



Size
Dia (outside diameter)
Size
Dia (outside diameter)


C-850D
M8
C-1260D
M12


C-870D
C-1270D


C-1050D
M10
C-1290D


C-1060D
C-1210D


C-1080D
C-1212D


C-1090D
C-1215D


C-1010D
C-1610D
M16


C-1012D
C-1612D




C-1615D




C-1619D




C-2013D
M20




C-2015D




The post UNIKA C-D Hot Dip Galvanizing Anchor first appeared on Kouei Japan Trading | Get Quotation.


UNIKA SC Stainless Steel Rooty Anchor
kvtpart — Fri, 13 Nov 2020 03:09:40 +0000
Manufacturer: UNIKA

Model: SC type mm size (Stainless)/ SC type Inch size (stainless)
■Simply hammer in the pin. Just by looking at the pin, completion of anchor can be confirmed.

■Screw diameter and anchor unit diameter are the same, allowing use in small drill bores.

■SC type is all stainless steel, making it highly corrosion resistant. Wide applications in high humidity locations.







Thread dia
Tightening Torque


M6
5 N・m


M8
12 N・m


M10, W3/8
24 N・m


M12, W1/2
42 N・m


M16
100 N・m


M20
200 N・m





USES

Concrete






Drill preparation hole.
Position anchor.
Strike pin with hammer.
Anchor attached with open lags.




■Installation explanatory video
■Uses
Suited for all kinds of fixture attachments including construction, electrical, sanitation, airconditioning/heating, signboard attachment, seat attachment, and machine installation works.
■Structural Drawing

■Use Examples




Protective clothing including safety glasses and helmets must always be worm when installing.
Drill perpendicularly into target surface.
Compared with anchor insertion depth, drill holes should be 5mm deeper for M6, M8, M10; 7mm deeper for M12; 10mm deeper for M16; 15mm deeper for M20.
Drilling preparation holes too shallow will break or bend core rods.
Use blower throughly.
Always set nut before hammering.
Use a hammer appropriate for the anchor size.





JCAA Product Certification Mark
Products with this certification mark satisfy the evaluation and certification standards specified

by the Japan Construction Anchor Association (JCAA).



 
SPECIFICATION
SC type mm size (Stainless)



Size
Dia (outside diameter)
Size
Dia (outside diameter)


SC-645
M6
SC-1260
M12


SC-660
SC-1270*


SC-840
M8
SC-1280


SC-850*
SC-1290*


SC-870*
SC-1210*


SC-890*
SC-1212*


SC-810
SC-1215*


SC-1050
M10
SC-1680
M16


SC-1060*
SC-1610*


SC-1070
SC-1612*


SC-1080*
SC-1615*


SC-1090*
SC-1619*


SC-1010*
SC-2013*
M20


SC-1012*
SC-2015*


SC-1015
SC-2019*




*JCAA certified product

*Special dimensions for both C and SC types can be produced to order.
 SC type Inch size (stainless)

*JCAA certified product

*Special dimensions for both C and SC types can be produced to order.

*Maximum extraction strength values are values measured by UNIKA and not standard values.
The post UNIKA SC Stainless Steel Rooty Anchor first appeared on Kouei Japan Trading | Get Quotation.


UNIKA C Rooty Anchor
kvtpart — Fri, 13 Nov 2020 02:55:35 +0000
Manufacturer: UNIKA

Model: C type mm size (Trivalent Chromate Treatment)/ C type Inch size (Trivalent Chromate Treatment)
■Simply hammer in the pin. Just by looking at the pin, completion of anchor can be confirmed.

■As the thread and the anchor main body are the same in diameter, anchoring without rattling is possible by drilling from above fixture.






Thread dia
Tightening Torque


M6
5 N・m


M8, W5/16
12 N・m


M10, W3/8
24 N・m


M12, W1/2
42 N・m


M16
100 N・m


M20
200 N・m



USES

Concrete






Drill preparation hole.
Position anchor.
Strike pin with hammer.
Anchor attached with open lags.

■Installation explanatory video

■Uses
Suited for all kinds of fixture attachments including construction, electrical, sanitation, airconditioning/heating, signboard attachment, seat attachment, and machine installation works.
■Structural Drawing

■Use Examples




Protective clothing including safety glasses and helmets must always be worm when installing.
Drill perpendicularly into target surface.
Compared with anchor insertion depth, drill holes should be 5mm deeper for M6, M8, M10; 7mm deeper for M12; 10mm deeper for M16; 15mm deeper for M20.
Drilling preparation holes too shallow will break or bend core rods.
Use blower throughly.
Always set nut before hammering.
Use a hammer appropriate for the anchor size.





JCAA Product Certification Mark
Products with this certification mark satisfy the evaluation and certification standards specified

by the Japan Construction Anchor Association (JCAA).




SPECIFICATION
C type mm size (Trivalent Chromate Treatment)



Size
Dia (outside diameter)
Size
Dia (outside diameter)


C-645
M6
C-1260
M12


C-660
C-1270*


C-840
M8
C-1280*


C-850*
C-1290*


C-870*
C-1210*


C-890*
C-1212*


C-810*
C-1215*


C-1050
M10
C-1680
M16


C-1060*
C-1610*


C-1070*
C-1612*


C-1080*
C-1615*


C-1090*
C-1619*


C-1010*
C-2013*
M20


C-1012*
C-2015*


C-1015
C-2019*




*JCAA certified product

*Special dimensions for both C and SC types can be produced to order.
C type Inch size (Trivalent Chromate Treatment)



Size
Dia (outside diameter)


C-2550*
W5/16


C-3060*
W3/8


C-3090*


C-4870*
W1/2




*JCAA certified product

*Special dimensions for both C and SC types can be produced to order.

*Maximum extraction strength values are values measured by UNIKA and not standard values.
The post UNIKA C Rooty Anchor first appeared on Kouei Japan Trading | Get Quotation.


UNIKA DKB Deck Bit
kvtpart — Fri, 13 Nov 2020 02:32:54 +0000
Manufacturer: UNIKA

Model: Deck bit (DKB type)/ Extension shank for deck bit/ TOOL BOX SET
■Most suitable for drilling prepared hole in deck plate for inserting anchors.

■Long life and excellent sharpness have been achieved by titanium coating and a sharp point.

■Equipped with a safety stopper to prevent pass-through at the time of penetration.

■Use of extension shank also improves workability.

◆Effective length: 2mm

◆Matching drill: Electric drill/Percussion drill(rotating mode)

◇All the cutting edge is coated with titanium.

USES
Deck plate• Thin iron plate (2mm or thinner)• Stainless steel plate (1mm or thinner)• Aluminum plate (2mm or thinner) • Plastic• PVC plate• Resin plate


■Matching insert anchor



Diameter(mm)
Matching insert


15.0
DP-3020/DM-3040/PH-3030


16.0
BS type (W3/8)/BSL type (W3/8)

/BSD type (W3/8)


SHZ-3040/SH-3040/KM-3030

SHD-3025/KP-3020


22.0
BS type (W1/2)/BSL type (W1/2)

/BSD type (W1/2)


SHZ-4055/SH-4055/SHD-4025



■Extension shank

■An extension shank capable of attaching and detaching the deck bit with a single touch. Most suitable for drilling during standing work.



Use electric drills appropriate for the deck bit used.
Check that the main switch is turned off, and make sure to take out the power supply plug from the socket before attaching to or detaching from the motor or extension shank.
Product main body, swarf and drilling surface are hot due to friction in drilling. Never touch them with bare hands.
Wear work clothes suitable for the operation. In particular, wear protective glasses to prevent shavings from getting into your eyes.
Prepare the working environment before starting a job.
Carefully read the instruction manual for the motor used before use.





■Titanium coated cutting edge
Stable center positioning capability and long life have been achieved by a unique cutting edge shape, titanium coating on all the cutting edge, and small diameter point.



■Safety stopper
Pass-through at time of penetration is prevented because it is equipped with a safety stopper.



■Three-sided shank
A three-sided shank capable of reliably transmitting rotation force, and being attached to and detached from the optional extension shank.


SPECIFICATION
Deck bit (DKB type)                              Extension shank for deck bit                  TOOL BOX SET



Size
Diameter(mm)

Size
Overall Length(mm)

Size
Set Dia(mm)


DKB-15N
15
DKBSK-390
390
TB-50
15


DKB-16N
16
DKBSK-550
550
TB-51
16


DKB-18N
18
DKBSK-550SDS
550




DKB-20N
20






DKB-22N
22








The post UNIKA DKB Deck Bit first appeared on Kouei Japan Trading | Get Quotation.


UNIKA Cordless H.S.S Bi-Metal Hole Saw
kvtpart — Fri, 13 Nov 2020 02:24:51 +0000
Manufacturer: UNIKA

Model: HSS Cordless High-speed-steel hole saw (HSSJ type)/Center Drill/ Ejector Spring/ HSS Cordless High-speed-steel hole saw (Tool Box Set)
■Blade part utilizing high grade steel (SKH-51), providing a sharp cutting edge.

■Blade thickness only 0.5mm. Thoroughly reducing cutting resistance to a minimum, reducing waste of electrical consumption, improving the number of holes drilled on one full charge.

◆Effective length: 12mm

◆Matching drill: Cordless drill/Driver drill/Electric drill(under 400W)

◇with standard ejector spring provided on all sizes.

USES
Sheet metal (2mm or less)• Aluminum (2mm or less)• PVC• Plywood• FRP• Plastic

■Compatible Motors



■Rechargeable drills of a rotation speed of approximately 1,000 rpm and rotary torque of 50 N-m (approx. 50 kgf-cm) specifications (for rotation use only).
■Compact electric drills with electric power consumption of 400 W or less.



*Cannot be used with impact wrenches, drilling machines, percussion drills, or hammer drills.

*Use with a rechargeable drill at 9.6V or more.


Use electrical drills appropriate for the hole saw used.
Be sure to turn off the main switch of the drill and disconnect the power supply plug from the socket before attaching and detaching the hole saw.
Do not touch the hole saw, the shavings, or the drilled surface by hand because they may be hot by drilling friction.
Wear working clothes suitable for operation, including eye protection equipment to prevent shavings from getting into eyes.
Prepare working environment before starting jobs.
Read carefully the instruction manual for the electrical drill used before use.

SPECIFICATION
HSS Cordless High-speed-steel hole saw (HSSJ type)



Size
Diameter(mm)
Size
Diameter(mm)
Size
Diameter(mm)
Size
Diameter(mm)


HSSJ-12
12
HSSJ-19
19
HSSJ-26
26
HSSJ-33
33


HSSJ-13
13
HSSJ-20
20
HSSJ-27
27
HSSJ-34
34


HSSJ-14
14
HSSJ-21
21
HSSJ-28
28
HSSJ-35
35


HSSJ-15
15
HSSJ-22
22
HSSJ-29
29
HSSJ-36
36


HSSJ-16
16
HSSJ-23
23
HSSJ-30
30
HSSJ-37
37


HSSJ-17
17
HSSJ-24
24
HSSJ-31
31
HSSJ-38
38


HSSJ-18
18
HSSJ-25
25
HSSJ-32
32






Center Drill                                                Ejector Spring                                        Tool Box Set



Size
Diameter(mm)

Size
Hole Saw Size(mm)

Size
Set Dia(mm)


S-4L
4
HSSJ KS-No.3
14-Dec
TB-29
21




HSSJ KS-No.4
15-38
TB-30
22






TB-31
25



The post UNIKA Cordless H.S.S Bi-Metal Hole Saw first appeared on Kouei Japan Trading | Get Quotation.


UNIKA H.S.S Bi-Metal Hole Saw Without Collar
kvtpart — Fri, 13 Nov 2020 02:12:46 +0000
Manufacturer: UNIKA

Model: H.S.S High-speed-steel hole saw Without collar（HSS-TN type）/ Center Drill（ ）/ Ejector spring/ H.S.S High-speed-steel hole saw Without collar （TOOL BOX SET）
■Without a stopper (collar), added depth of cut is possible.

■It can be used on an impact power drill or a standard electric power drill.

■Cutting edge has a bimetallic structure employing cobalt HSS.

◆Effective length: 38mm

◆Matching drill: Cordless drill/Driver drill/Electric drill

◇with standard ejector spring provided on all sizes.

USES
Sheet metal (3.2mm or less)• Aluminum (3.2mm or less)• Metal siding• PVC• Plasterboard• Plywood• FRP• Plastic





*Securely chuck the three-surface section of the shank to prevent swinging or falling.
*Do not hit the cutting edges of the tungsten carbide/ultra-hard tip against any hard object or allow strong contact with the work material that may occur when the center drill passes through. The tip will crack.
*Do not reduce the rotation speed excessively during drilling. Jamming or tip cracking may result.





SPECIFICATION
H.S.S High-speed-steel hole saw Without collar（HSS-TN type）



Size
Diameter(mm)
Size
Diameter(mm)
Size
Diameter(mm)


HSS-15TN
15
HSS-23TN
23
HSS-31TN
31


HSS-16TN
16
HSS-24TN
24
HSS-32TN
32


HSS-17TN
17
HSS-25TN
25
HSS-33TN
33


HSS-18TN
18
HSS-26TN
26
HSS-34TN
34


HSS-19TN
19
HSS-27TN
27
HSS-35TN
35


HSS-20TN
20
HSS-28TN
28
HSS-36TN
36


HSS-21TN
21
HSS-29TN
29
HSS-37TN
37


HSS-22TN
22
HSS-30TN
30
HSS-38TN
38




Center Drill（ )                               Ejector spring                          TOOL BOX SET



Size
Diameter(mm)

Size
Hole Saw Size(mm)

Size
Set Dia(mm)


STR-6
6
HSS KS-No.3
15-38
TB-11
21






TB-12
22






TB-13
25




The post UNIKA H.S.S Bi-Metal Hole Saw Without Collar first appeared on Kouei Japan Trading | Get Quotation.

Size	Bolt dia	Head	Dia(mm)
#100	M4	Round head	7
#200	M5		8
#300	M6		10
#400	M8	Hexagon head	13.5
#500	M10		17.5
#600	M12		19.2

Size	Dia(mm)
TJ3.0X90	3
TJ3.2X90	3.2
TJ3.4X90	3.4
TJ3.5X90	3.5
TJ3.8X95	3.8
TJ4.0X95	4
TJ4.3X95	4.3
TJ4.5X95	4.5
TJ4.8X95	4.8
TJ5.0X95	5
TJ5.3X100	5.3
TJ5.5X100	5.5
TJ6.0X100	6
TJ6.4X100	6.4
TJ6.5X100	6.5

Code	Diameter(mm)
DJW5.0X60S	5
DJW6.0X60S	6
DJW6.4X60S	6.4
DJW7.0X60S	7
DJW8.0X60S	8
DJW10.0X60S	10
DJW12.0X60S	12
DJW15.0X60S	15
DJW20.0X76S	20
DJW25.0X76S	25
DJW30.0X76S	30
DJW32.0X76S	32
DJW35.0X76S	35

Size	Dia(mm)
TR3.0X85	3
TR3.2X85	3.2
TR3.4X85	3.4
TR3.5X85	3.5
TR3.8X85	3.8
TR4.0X85	4
TR4.3X85	4.3
TR4.5X85	4.5
TR4.8X85	4.8
TR5.0X85	5
TR5.3X100	5.3
TR5.5X100	5.5
TR6.0X100	6
TR6.4X100	6.4
TR6.5X100	6.5
TR7.0X125	7
TR7.2X125	7.2
TR7.5X125	7.5
TR8.0X125	8
TR8.5X125	8.5
TR9.0X150	9
TR9.5X150	9.5
TR10.0X150	10
TR10.5X150	10.5
TR11.0X150	11

Size	Dia(mm)
SB3.0X85BP	3
SB3.2X85BP	3.2
SB3.4X85BP	3.4
SB3.5X85BP	3.5
SB4.0X85BP	4
SB4.3X85BP	4.3
SB4.5X85BP	4.5
SB4.8X85BP	4.8
SB5.0X85BP	5
SB5.5X100BP	5.5
SB6.0X100BP	6
SB6.4X100BP	6.4
SB7.0X125BP	7
SB8.0X125BP	8

Size	Dia(mm)
UX6.0X160	6
UX6.4X160	6.4
UX6.5X160	6.5
UX7.0X160	7
UX7.2X160	7.2
UX7.5X160	7.5
UX8.0X160	8
UX8.5X160	8.5
UX9.0X160	9
UX9.5X160	9.5
UX10.0X160	10
UX10.5X160	10.5
UX11.0X160	11
UX12.0X160	12
UX12.5X160	12.5
UX12.7X160	12.7
UX13.0X160	13
UX13.5X160	13.5
UX14.0X160	14
UX14.3X160	14.3
UX14.5X160	14.5
UX15.0X160	15
UX16.0X160	16
UX16.5X160	16.5
UX17.0X160	17
UX18.0X160	18

Size	Dia(mm)
UXL8.0X210	8
UXL8.5X210	8.5
UXL9.0X210	9
UXL10.0X210	10
UXL10.5X210	10.5
UXL12.0X210	12
UXL12.5X210	12.5
UXL12.7X210	12.7
UXL14.0X210	14
UXL14.5X210	14.5
UXL15.0X210	15
UXL16.0X210	16
UXL17.0X210	17
UXL18.0X210	18
UXL19.0X210	19
UXL20.0X210	20

UXL10.0X260	10
UXL10.5X260	10.5
UXL12.0X260	12
UXL12.5X260	12.5
UXL12.7X260	12.7
UXL14.0X260	14
UXL14.5X260	14.5
UXL15.0X260	15
UXL16.0X260	16
UXL16.5X260	16.5
UXL17.0X260	17
UXL18.0X260	18
UXL19.0X260	19
UXL20.0X260	20
UXL22.0X260	22
UXL23.0X260	23
UXL24.0X260	24
UXL25.0X260	25
UXL26.0X260	26

UXL10.0X350	10
UXL10.5X350	10.5
UXL11.0X350	11
UXL12.0X350	12
UXL12.5X350	12.5
UXL12.7X350	12.7
UXL13.0X350	13
UXL14.0X350	14
UXL14.3X350	14.3
UXL14.5X350	14.5
UXL15.0X350	15
UXL16.0X350	16
UXL16.5X350	16.5
UXL17.0X350	17
UXL17.5X350	17.5
UXL18.0X350	18
UXL19.0X350	19
UXL20.0X350	20
UXL22.0X350	22
UXL23.0X350	23
UXL24.0X350	24
UXL25.0X350	25
UXL26.0X350	26

UXL10.0X450	10
UXL10.5X450	10.5
UXL12.0X450	12
UXL12.5X450	12.5
UXL13.5X450	13.5
UXL14.5X450	14.5
UXL16.0X450	16
UXL18.0X450	18
UXL19.0X450	19
UXL20.0X450	20
UXL22.0X450	22
UXL23.0X450	23
UXL24.0X450	24
UXL25.0X450	25
UXL26.0X450	26

	Maker	Model
	Hitachi	PR25B
		DH35
		PR-38E
		DH42
		DH40SA
		DH40SR
		DH45SA
	Makita	HR3530
		HR3520
		HR3850
		HR3811
		HR4030C
	Ryobi	ED-382NPA
		ED-382NA
		ED-383N

Size		Dia
non-pack	Blister pack	(mm)
HEX10.0X280	HEX10.0X280BP	10
HEX10.5X280	HEX10.5X280BP	10.5
HEX11.0X280	HEX11.0X280BP	11
HEX12.0X280	HEX12.0X280BP	12
HEX12.5X280	HEX12.5X280BP	12.5
HEX12.7X280	HEX12.7X280BP	12.7
HEX13.0X280	HEX13.0X280BP	13
HEX13.5X280	HEX13.5X280BP	13.5
HEX14.0X280	HEX14.0X280BP	14
HEX14.3X280	HEX14.3X280BP	14.3
HEX14.5X280	HEX14.5X280BP	14.5
HEX15.0X280	HEX15.0X280BP	15
HEX16.0X280	HEX16.0X280BP	16
HEX16.5X280	HEX16.5X280BP	16.5
HEX17.0X280	HEX17.0X280BP	17
HEX17.5X280	HEX17.5X280BP	17.5
HEX18.0X280	HEX18.0X280BP	18
HEX19.0X280	HEX19.0X280BP	19
HEX20.0X280	HEX20.0X280BP	20
HEX21.5X280	HEX21.5X280BP	21.5
HEX22.0X280	HEX22.0X280BP	22
HEX22.5X280	–	22.5
HEX23.0X280	–	23
HEX24.0X280	–	24
HEX25.0X280	–	25
HEX25.5X280	–	25.5
HEX26.0X280	–	26
HEX26.5X280	–	26.5
HEX28.0X280	–	28
HEX28.5X280	–	28.5
HEX29.0X280	–	29
HEX30.0X280	–	30
HEX32.0X280	–	32
HEX35.0X280	–	35
HEX38.0X280	–	38
HEX40.0X280	–	40

Size	Dia (mm)
HEXL10.5X505	10.5
HEXL12.0X505	12
HEXL12.5X505	*12.5
HEXL12.7X505	12.7
HEXL14.3X505	14.3
HEXL14.5X505	14.5
HEXL15.0X505	15
HEXL16.0X505	16
HEXL16.5X505	*16.5
HEXL17.0X505	17
HEXL17.5X505	17.5
HEXL18.0X505	18
HEXL19.0X505	19
HEXL20.0X505	20
HEXL21.5X505	21.5
HEXL22.0X505	22
HEXL24.0X505	24
HEXL25.0X505	25
HEXL25.5X505	25.5
HEXL26.0X505	26
HEXL28.0X505	28
HEXL28.5X505	28.5
HEXL29.0X505	29
HEXL30.0X505	30
HEXL32.0X505	32
HEXL34.0X505	34
HEXL35.0X505	35
HEXL38.0X505	38
HEXL40.0X505	40

Size	Dia(mm)
HEXLL14.3X600	14.3
HEXLL14.5X600	14.5
HEXLL16.0X600	16
HEXLL17.0X600	17
HEXLL17.5X600	17.5
HEXLL18.0X600	18
HEXLL19.0X600	19
HEXLL21.5X600	21.5
HEXLL22.0X600	22
HEXLL25.0X600	25
HEXLL14.3X800	14.3
HEXLL14.5X800	14.5
HEXLL16.0X800	16
HEXLL17.0X800	17
HEXLL17.5X800	17.5
HEXLL18.0X800	18
HEXLL19.0X800	19
HEXLL21.5X800	21.5
HEXLL22.0X800	22
HEXLL25.0X800	25
HEXLL14.3X1000	14.3
HEXLL14.5X1000	14.5
HEXLL16.0X1000	16
HEXLL17.0X1000	17
HEXLL17.5X1000	17.5
HEXLL18.0X1000	18
HEXLL19.0X1000	19
HEXLL21.5X1000	21.5
HEXLL22.0X1000	22
HEXLL25.0X1000	25

Size	Dia(mm)
TP6.4X100	6.4
TP6.5X100	6.5
TP7.0X100	7
TP7.5X100	7.5
TP8.0X115	8
TP8.5X115	8.5
TP9.0X115	9
TP9.5X115	9.5
TP10.0X120	10
TP10.5X120	10.5
TP11.0X120	11
TP12.0X120	12
TP12.5X120	12.5
TP12.7X120	12.7
TP13.0X120	13
TP13.5X120	13.5
TP14.3X120	14.3
TP14.5X120	14.5
TP14.7X120	14.7
TP16.0X130	16
TP16.5X130	16.5
TP17.0X130	17
TP17.5X130	17.5
TP18.0X130	18
TP19.0X160	19
TP21.5X160	21.5
TP22.0X160	22

Size	Dia(mm)
TPL10.0X280	10
TPL10.5X280	10.5
TPL11.0X280	11
TPL12.0X280	12
TPL12.5X280	12.5
TPL12.7X280	12.7
TPL13.0X280	13
TPL13.5X280	13.5
TPL14.0X280	*14.0
TPL14.3X280	14.3
TPL14.5X280	14.5
TPL15.0X280	*15.0
TPL16.0X280	16
TPL17.0X280	17
TPL17.5X280	17.5
TPL18.0X280	18
TPL19.0X280	*19.0
TPL20.0X280	*20.0
TPL21.5X280	*21.5
TPL22.0X280	*22.0

Size	Dia(mm)
TPSB10.0X280	10
TPSB10.5X280	10.5
TPSB11.0X280	11
TPSB12.0X280	12
TPSB12.5X280	12.5

Size	Overall Length(mm)	Shank	Cotter	Pcs./box	JAN Code
No.1	158	HEX	attached	6	4989270070004
No.1-SDS	120	SDS	none	1	4989270100008

Size	Thread size	Dia(mm)
TL-630	M6	7
TL-640
TL-650
TL-835	M8	8
TL-840
TL-845
TL-850
TL-855
TL-860
TL-865
TL-870
TL-875
TL-880
TL-890
TL-810
TL-1050	M10	10
TL-1070
TL-1090
TL-1010
TL-1250	M12	12
TL-1270
TL-1210

Size	Anchor size	Dia(mm)
TLD-7.5	M6	7.5
TLD-9.0	M8	9
TLD-11.0	M10	11
TLD-13.5	M12	13.5

Size	Bolt size	Hole dia(mm)
NBA-859	M8	11.5
NBA-1060	M10	14
NBA-2559	W5/16	11.5
NBA-3860	W3/8	14

Non-Plug Screw Diameter	Concrete	Block	Brick
4-mm Type	3.5mm	3.5mm	3.2mm
5-mm Type	4.3mm	4.3mm	4.0mm
6-mm Type	5.5mm	5.5mm	5.0mm

Size	Head
P-425B-S	Pan head
P-432B-S
P-438B-S
F-425B-S	Flat head
F-432B-S
F-438B-S
PW-425B-S	Pan washer head
PW-432B-S	Pan washer head

Size	Head
PS-425B	Pan head
PS-432B
PS-438B
FS-425B	Flat head
FS-432B
FS-438B
PWS-425B	Pan washer head
PWS-432B	Pan washer head

Size	Pcs./box	Packs./box	JAN Code
NA-3	100	600	4.98927E+12
NA-9			4.98927E+12
NA-16			4.98927E+12

Thread dia	Tightening Torque
M6, W1/4	5 N・m
M8, W5/16	12 N・m
M10, W3/8	24 N・m
M12, W1/2	42 N・m
M16, W5/8	100 N・m
M20, W3/4	200 N・m
M22, W7/8	280 N・m
M24, W1	360 N・m

Size	Thread size	Size	Thread size
B-650	M6	B-16100	M16
B-865	M8	B-16120
B-1070*	M10	B-16125*
B-1080*		B-16160*
B-10100		B-20170	M20
B-10120		B-20200	M20
B-10150		B-22200	M22
B-12100*	M12	B-24200	M24
B-12120*
B-12125*
B-12160*
B-12200

Part No.	Anchor size
28B	M6, W1/4
258B	M8, W5/16
38B	M10, W3/8
48B	M12, W1/2
58B	M16, W5/8
68B	M20, W3/4
78B	M22, W7/8

Thread nominal diameter	M10	M12
Width across flat	14mm	19mm
Tightening torque	30N•m	45N•m

Size	Dia (outside diameter)	Size	Dia (outside diameter)	Size	Dia (outside diameter)	Size	Anchor size(mm)
BGL-3070M*	M10	BGSL-3070M*	M10	BGL-3070D	M10	NBG-30SD	BGL-3070M/BGSL-3070M/BGL-3070D
BGL-4080M*	M12	BGSL-4080M*	M12			NBG-40SD	BGL-4080M/BGSL-4080M