Drilling and Cutting, Japan, Unika
UNIKA TP Type Taper Shank Drill Bit
Manufacturer: UNIKA
Model: Taper shank drill bit No.1 (short), Taper shank drill bit No.1 (long), Taper shank drill bit No.1 (long/for anchoring of slopes)
- ■All sizes can be interchanged using a single tapered-shank adaptor.
- ■Offering economy with productivity : ideal for all kinds of sites requiring drilling.
*For hole drilling of stone material, use a drill for stone.
◆Matching drill: Hammer drill
Use
Concrete•Stone•Block•Brick•Mortar•
Slate•Japanese wall
- Use the drill appropriate for the drill bit used.
- Be sure to turn off the main switch of the electrical drill and disconnect the power supply plug from the socket before attaching and detaching the drill bit.
- Attach the drill bit by pushing in until it stops at the end of the chucking part of the drill, and clamp the drill bit tightly so it will not loosen or come off.
- Wear eye protection glasses.
- Drill holes vertically against the drilled material surface.
- Read the instruction manual for the electrical drill used carefully before use and always observe those instructions to ensure safe and correct operation.
- SPECIFICATIONS
- Taper shank drill bit No.1 (short)
-
Size Dia(mm) TP6.4X100 6.4 TP6.5X100 6.5 TP7.0X100 7 TP7.5X100 7.5 TP8.0X115 8 TP8.5X115 8.5 TP9.0X115 9 TP9.5X115 9.5 TP10.0X120 10 TP10.5X120 10.5 TP11.0X120 11 TP12.0X120 12 TP12.5X120 12.5 TP12.7X120 12.7 TP13.0X120 13 TP13.5X120 13.5 TP14.3X120 14.3 TP14.5X120 14.5 TP14.7X120 14.7 TP16.0X130 16 TP16.5X130 16.5 TP17.0X130 17 TP17.5X130 17.5 TP18.0X130 18 TP19.0X160 19 TP21.5X160 21.5 TP22.0X160 22 
- Taper shank drill bit No.1 (long)
-
Size Dia(mm) TPL10.0X280 10 TPL10.5X280 10.5 TPL11.0X280 11 TPL12.0X280 12 TPL12.5X280 12.5 TPL12.7X280 12.7 TPL13.0X280 13 TPL13.5X280 13.5 TPL14.0X280 *14.0 TPL14.3X280 14.3 TPL14.5X280 14.5 TPL15.0X280 *15.0 TPL16.0X280 16 TPL17.0X280 17 TPL17.5X280 17.5 TPL18.0X280 18 TPL19.0X280 *19.0 TPL20.0X280 *20.0 TPL21.5X280 *21.5 TPL22.0X280 *22.0 
- Taper shank drill bit No.1 (long/for anchoring of slopes)
-
Size Dia(mm) TPSB10.0X280 10 TPSB10.5X280 10.5 TPSB11.0X280 11 TPSB12.0X280 12 TPSB12.5X280 12.5 
-
Adapter Size Overall Length(mm) Shank Cotter Pcs./box JAN Code No.1 158 HEX attached 6 4989270070004 No.1-SDS 120 SDS none 1 4989270100008 *No. 1 = Morse taper (MT-1)
Cotter JAN Code 4989270070028 
*Used for detaching bits.
Related Products
-
Kikusui Tape 192 Cloth Glue Tape
-
Kyowa CTRS-BATT010A Battery Unit CTRS-100 Series Compact Recorder
-
Super Tool SDC0.5S/1S/2S/3.2S/6.3S Screw Cam Clamp (Double Eye Type)
-
Vessel No.990TX G-grip TORX Screwdriver
-
Nakatani Kikai NC300A Low Vibration Chipping Hammer (Right Hand Coil Spring)
-
Ross Asia MD4 series Port size is 3/8″ to 3/4″. Flow rates up to 204 scfm (5777 l/min)
REQUEST QUOTATION
PAYMENT
LINK
