Drilling and Cutting, Japan, Unika
UNIKA SE Type (Spin-in) Resin A
Manufacturer: UNIKA
Model: SE type (Spin-in)
-
- ■Excellent anchoring and earthquake resistance.
- ■Can adapt to construction material that is in a wet state.
- ■The sealed of the glass tube has a high alkali resistance preventing leaks. Also, it offers a long shelf life.
Uses
Concrete•Stone
- 1.Drill preparation hole.
- 2.3.Remove debris cleanly from inside hole.
- 4.Position capsule.
- 5.Insert bolt into hole while applying rotation and impact.
- 6.Do not move anchor bolt during specified hardening period after insertion.
■Uses
Foundation work using steel reinforcers etc., highway construction, tunnel construction, installation work for vibrating machines.
■Construction Drawing
■Hardening Time Standard
| Temperature(°C) | -5 | 5 | 20 | 30 |
|---|---|---|---|---|
| Initial Hardening Time (min.) | 300 | 60 | 20 | 10 |
(Do not move the anchor bar during the hardening time.)
■Bolt Shape Used
Make sure to cut the edge of the anchor bar 45°for use.
Use one with an irregular surface for the hex head set screw or deformed steel bar.
- Drill the preparation hole with the diameter and the depth as specified.
- Clean the hole drilled with a metal brush and blowing equipment.
- Be sure to wear safety protective equipment such as a facemask, eye protection glasses, and safety gloves during the operation.
- Never inset the capsule without rotation.
- Do not move or put weight on the installed bolts during the specified period for resin solidification.
- JCAA Product Certification Mark
- Products with this certification mark satisfy the evaluation and certification standards specified
by the Japan Construction Anchor Association (JCAA). -
Size Dia*Length(mm) SE-10* 10.8×90 SE-12* 12.7×100 SE-16* 16.8×120 SE-20* 21.5×175 SE-22* 21.5×210 SE-24* 25.0×180 
Resin Anchor Hammering Attachments
Part No. Convex Dimensions Hammering Motor JAN Code T-1 12.7-mm square Hammer drill 4989270920033 T-2 19-mm square Hammer drill 4989270920040 S-1 12.7-mm square Rotary hammer drill 4989270920064 D-1 12.7-mm square Percussion drill 4989270920057
Related Products
-
Kitz 300UMC,300UMCM Stainless & High Alloy Class 300 Gate Valve
-
Nesstech SUNA-M1DR Liquid/Gas Expansion Temperature Switch (Direct)
-
TSURUMI PUMP PARTS: WEAR RING Parts & Accessories
-
Fujii Denko T-31 Subsidiary Lanyard For Pole Safety Belt
-
SAKUSAKU CCMT060204-UF ISO Turning Insert 80° Rhombic/7° Positive
-
Murakoshi MY−100XN Three-dimensional Trademark Dust Collector
REQUEST QUOTATION
PAYMENT
LINK
