Taseto
TASETO SPANON Anti-Spatter Agents
Product Made in Japan
Manufacturer: TASETO
Model: SPANON
The labor-saving and rationalization are urgent issues to the welding industry. Spatter generated during welding work not only adversely affects the finish appearance of a welded product but also the time required for removing the spatter cannot be neglected.
TASETO SPANONs are anti-spatter agents, which are to solve these problems. TASETO SPANON will help rationalize your welding work and, at the same time, improve the quality of your welded products.
Feather
1. Excellent effect on preventing spatters from depositing on base metal during welding.
2. not influence welding.
3. SPANON N, N-1have rust-proof effect
4. SPANON N, N-1 K-100 can be over-coated with other paint.
5. SPANON K-100, S can be removed easily after welding.
● How to use
1. Clean off rust from the surface using an organic solvent or wire brush.
2. Apply uniform coats of TASETO SPANON until the recommended thickness is obtained
with a brush or spray gun.
3. Start welding after the coated surface dried completely.
4. Some TASETO SPANONs are very adhesive to steels, thus making it difficult to
remove such coatings. For easier removal, use TASETO SPANON S, SPANON K-100.
● Note on usage
1. Film of SPANON N/N-1 is very difficult to remove, if you want to remove it, use a mechanical tool like a grinder or apply paint remover.
2. Almost all paint can be over-coated on SPANON N/N-1/K-100, If you use a special paint, please make the coating test in advance or consult with us.
<
Base Metal | Mild & high tensile steels | Stainless steels | |||
SPANON Type | N | N-1 | K-100 | S | |
Physical Properties | Liquid system | E | E | WS | WD |
Coating film | Transparent | Transparent | Transparent | White | |
Drying time(min.) | 10 | 10 | 10 | 10 | |
Recommended coated thickness(pm) | 3 | 2 | 2 | 15 | |
Coated area(m^2/kg) | 60 | 60 | 60 | 25 | |
Coating method | Brushing | O | O | O | O |
Spray gun | △ | O | o | X | |
Hand spraying | △ | O | o | O | |
For Multi-pass welding | o | △ | X | © | |
Post-cleaning | Water | X | X | o | o |
Pickling | X | X | o | o | |
Solvent | X | X | o | X | |
Alkali | X | X | o | o | |
Over coating with paint | o | o | o | X | |
Rust Prevention | Indoors (month) | 2 | 1 | 2 weeks | 1 |
Outdoors (week) | 2 | 1 | X | X |
Remarks
1. Liquid system
E : Emulsion type
WD : Water dispersion
WS : Water soluble
2. Others
◎ : Very good
○ : Good or applicable
△ : Possible but not so good
× :NG