Sankei Engineering
Sankei Engineering CP25-CP30S Spring Contact Probe
Product Made In Japan
Manufacturer: Sankei Engineering
Model: CP25-CP30S
CP25 – CP30S (Spring contact probe). The durability of bushing: more than 1 million strokes (2mm stroke, 60 strokes / 60 seconds). Thermal-endurance : 100ºC or below
The stated durability of the bushing is a result of our internal testing. It is not guaranteed and your actual results may vary.
Specification
Fig | Type | Configuration of Tip | a | b | C | d | d’ | e | g | g’ | h | j | k |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | CP25 | A, B, CX, R, T | 28 | 14 | 8.85 | — | 4 | 9 | 2 | — | 1.3 | 2 | 1.65 |
2 | D, E90, F, G60, G90, GX, H, K, KX, L, U, V | 5 | — | ||||||||||
3 | J | 31.4 | 17.4 | 5 | 3.4 | 2.5 | 1.4 | ||||||
J7 | 3.5 | 2.1 | |||||||||||
2 | CP25B | D, E90, F, G60, G90, GX, H, K, KX, L, U, V | 28 | 14 | 8 | 5 | — | 9 | 2 | — | 1.3 | 3 | 2.4 |
1 | CP30 | A, B, CX, R, T | 28 | 14 | 8 | — | 4 | 9 | 2 | — | 1.3 | 3 | 2.4 |
2 | D,DF,E90,F,G60,G90,GX,H,K,KX,L,U,V,QN | 5 | — | 2.5 | |||||||||
3 | J | 31.4 | 17.4 | 5 | 3.4 | 1.4 | |||||||
J7 | 3.5 | 2.1 | |||||||||||
2 | CP30SB | D, DF, E90, F, GX, H, K, KX, U, V | 28 | 14 | 8 | 5 | — | 9 | 3 | — | 1.3 | 3 | 2.4 |
2 | CP30P | D,DF,E90,F,G60,G90,GX,H,K,KX,L,U,V,QN | 28 | 14 | 8.85 | 5 | — | 9 | 2.5 | — | 1.3 | 2 | 1.65 |
2 | CP30S | D, DF, E90, F, GX, H, K, KX, U, V | 28 | 14 | 8.85 | 5 | — | 9 | 3 | — | 1.3 | 2 | 1.65 |
Related Products
-
Sankei Engineering NCP25LB – NCP250LP Probe with Long-Shaft Bushing
-
Sankei Engineering NCP10 – NCP250B Spring Contact Probe
-
Sankei Engineering CP50 – CP90 Spring Contact Probe
-
Sankei Engineering NCP300 – NCP300BA Spring Contact Probe
-
Sankei Engineering CP6-CP20B Spring Contact Probe
-
Sankei Engineering CP35 – CP35S Spring Contact Probe