Sankei Engineering
Sankei Engineering CPS10 – CPS35 Mini-Probe
Product Made In Japan
Manufacturer: Sankei Engineering
Model:CPS10 – CPS35
The durability of bushing: more than 1 million strokes (1mm stroke, 60 strokes / 60 seconds)
Thermal endurance: below 100ºC
The stated durability of the bushing is a result of our internal testing. It is not guaranteed and your actual results may vary.
Specification
| Fig | Type | Configuration of Tip | a | b | c | d | e | g | g’ | h | j | k |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | CP50 | D<5>, D6<5>, F<5>, G90, H | 48.5 | 23.5 | 15 | 7 | 15 | 5 | — | 3 | 5 | 4.2 |
| D4<8>, D6<8>, F<8> | 8 | |||||||||||
| D6<10> | 10 | |||||||||||
| 2 | M3PM | 5.3 | 4.8 | |||||||||
| M3BM | 7 | 6.1 | ||||||||||
| M4PM | 7.4 | 6.8 | ||||||||||
| M4BM | 8.8 | 8.2 | ||||||||||
| 1 | CPR50 | VC<5> | 48.5 | 23.5 | 15 | 7 | 15 | 5 | — | 3 | 5 | 4.2 |
| 3 | CP65 | D2<6>, F<6>, G90, H | 48.5 | 23.5 | 15 | 7 | 15 | 6 | — | 4.5 | 6.5 | 5.7 |
| D4<8>, F<8> | 8 | |||||||||||
| D6<10> | 10 | |||||||||||
| 4 | M3BM | 7 | 6.1 | |||||||||
| M4PM | 7.4 | 6.8 | ||||||||||
| M4BM | 8.8 | 8.2 | ||||||||||
| M5PM | 10 | 9 | ||||||||||
| M5BM | 11.5 | 10.5 | ||||||||||
| 3 | CP90 | D4<8>, F<8> | 48.5 | 23.5 | 15 | 7 | 15 | 8 | — | 6 | 9 | 8 |
| D6<10>, F<10> | 10 | |||||||||||
| 4 | M4BM | 8.8 | 8.2 | |||||||||
| M5PM | 10 | 9 | ||||||||||
| M5BM | 11.5 | 10.5 | ||||||||||
| M6PM | 12.5 | 11 | ||||||||||
| M6BM | 13 | 12.3 |
Related Products
-
Sankei Engineering CP25-CP30S Spring Contact Probe
-
Sankei Engineering NCP25LB – NCP250LP Probe with Long-Shaft Bushing
-
Sankei Engineering CP35 – CP35S Spring Contact Probe
-
Sankei Engineering CP50 – CP90 Spring Contact Probe
-
Sankei Engineering NCP300LB – NCP300LP Probe with Long-Shaft Bushing
-
Sankei Engineering NCP10 – NCP250B Spring Contact Probe
REQUEST QUOTATION
PAYMENT
LINK
