Japan, Kakuta
Kakuta No.131 Hold Down Clamp
Product Made in Japan
Manufacturer: Kakuta Co., Ltd
Model: No.131
No.131 (Hold down clamp (Vertical Handle))
Category | Hold down Clamp |
---|---|
Model Number | No.131 |
Weight | 1.590g |
Holding Capacity | 3.5kN(350kgf) |
Material | Steel(SPCC) |
Mounting Method | Flange Base |
Surface finish | Trivalent Chromate |
CAD data
Feature and Application
- A toggle clamp is designed to hold a workpiece by one-action operation after initial setting.
- It is easy to introduce and low cost compare with air or hydraulic.
- Optimal for repetitive work.
- For inspection, welding, assembly, machining and press fit.
- You can use for woodworking and DIY.
- ‘This toggle clamp with cam mechanism is adjustment-free to +/-1.5mm.
- Optimal for holding uneven thickness workpiece.
Caution
- The holding capacity is for reference. Max. value is by using hex bolt.
- The holding capacity will decrease toward the tip of clamp arm.
- Do not give the shock, vibration and internal pressure which causes a failure.
- Caution to pinch the fingers.
Related Products
-
Ross Asia Crossflow 35 series Double valve, with or without pressure switch, ports 1/4 to 3/4
-
YOSHITAKE SY-5 Strainer
-
Kurimoto M-620 Wafer Type Rubber-seated Butterfly Valves
-
Murata Panzer mast/for concrete pillars 88030-1/88030-A1
-
Wasino Kiki Y type Strainer for High Pressure
-
Gentos SL-B1R Safety Light