Japan, Tosoku
Tosoku DP Series Digital Code Switch
Product Made in Japan
Manufacturer: Tosoku
Model: DP Series
DP – the market leading digital code switch – series are designed for use in wide range of industrial instruments.
Features
● High reliability with double gold-plated sliding contacts.
● Eco-friendly:
1) Low cost and lesser parts by VA design
2) RoHS compliant
● Step angles: 13.85°, 15°, 20°, 27.69°, 30°
● Various types of codes: real binary, complementary binary, real gray, complementary gray
(either inhibit and/or parity circuit enclosed in all codes for safety). Special codes are also available.
● Duration of over 50000 switching cycles
● Waterproofed model available
Specifications
Items | Rated Value | |||
---|---|---|---|---|
Operating temperature | -20℃~ +70℃ (-4F ~ 158F) |
Keep the body unfrozen |
||
Storage temperature | -40℃~ +70℃ (-40F ~ 158F) |
|||
Rotational torque | 0.1N ~ 0.2N | |||
Terminal strength | 3N | |||
Panel nut tightening torque | 2N・m | |||
Stopper strength | 3N・m | |||
Vibration Durability | Range 10 ~ 55 ~ 10Hz/min | |||
No defect found after 2h of vibration stroke for 1.5mm to each XYZ direction | ||||
Contact resistance | ≦ 100mΩ | |||
Insulation resistance | DC250V/ After 1min | Terminal to terminal | 500MΩ ≦ | |
DC500V (1minLater) | Terminal to ground | 5000MΩ ≦ | ||
Withstanding voltage | AC250/1min | Terminal to terminal | ||
AC1500V/1min | Terminal to ground | |||
Load resistance | AC | 5V 0.5A/ 48V 0.05A | ||
DC | 5V 0.25A/ 25V 0.05A | |||
Durability | Rotational | Over 50000 times rotations | ||
Contact resistance | ≦ 150mΩ | |||
Insulation resistance | DC250V/50mΩ ≦, (Over a min) |
Warranty
● 1 year from the date of shipment
Part Number Designation
Dimensions (mm)
DP Accessory
Precautions
● How to connect panel
1. Peer double-sided tape off.
2. Stick double-sided tape to the panel (Pay attention to direction of adapter)
3. Use M9nut, toothed lock washer, and washer to tighten the panel and adapter.
4. M9 nut tightening torque shall be up to 2N.m.
5. Use double-sided tape under clean conditions.
PLEASE NOTE
1. Panel thickness shall be up to 2mm(to use adapter)
2. Panel thickness shall be up to 4mm(without adapter)
● Mounting hole dimensions
1. Make φ9.2 dimensions hole at the panel(to use adapter)
2. Check out left example to use without adapter
Related Products
-
TSUBOSAN 5-PCS./LENGTH 200mm Hand Precision Needle Files
-
Chiyoda Seiki SCP-15-B Semi-automatic Switching Gas Supply Device Panel Set (Standard flow rate: 15m3/h/Air)
-
Kimoto Lance packing Other slopes and sprayed materials
-
TSURUMI PUMP PARTS: PAN SCREW M4X8 SWRM W/LW Parts & Accessories
-
Daiichi Keiki DILII Battery-Powered Digital Pressure Gauge
-
Kondotec MS Series Fishing Boat Salvage Winches