IHARA SCIENCE CORPORATION
IHARA ISTEC Series Clean Tube Cutter for Stainless Tubes & Pipes
Product Made in Japan
Manufacturer: IHARA SCIENCE CORPORATION
Model: ISTEC Series
FEATURES
Best suitable to cut stainless steel pipe cleanly for such as semiconductor equipment.
As cutting fluid is not used, cleaning after cutting is not required.
The cut-edge surface is precise and clean. The surface finishing of the edge is higher grade.
The outer cutting edge is free of burrs. Internal burrs can be removed easily with an accessory tool.
Being compact and light in weight, this Tube Cutter is feasible for carrying. (ISTEC200)
Specification
| TYPE | ISTEC200 | ISTEC340 | ||||
|---|---|---|---|---|---|---|
| Size | Thickness | Tube Size | Thick | Pipe Size | Thick | |
| Normal Cutting Tube«Pipe Size & Thickness | 1/4 (∅6.35) | 0.89—1.0mm | 3/4 (∅19.05) | 2.1mm or less | 10A (∅17.3) | 2.1mm or less |
| 3/8 (∅9.52) | 1.0mm | 1 (∅25.4) | 15A (∅21.7) | |||
| 1/2 (∅12.7) | 1.2 —1.25mm | 20A (∅27.2) or less | ||||
| 25A (∅34.0) | ||||||
| Option | Corresponding to Option Size Thickness | •X-Possible to cut Intermediate size of the above . Inquire us for the details. | ||||
| 1/8 (∅3.18) | 0.5—0.72 | |||||
| Applicable tube material | 316L SS, 316 SS, 304 SS Note: When cutting 304SS, the life of the blade is short a little. | |||||
| Weight | 5.9kg | 20kg | ||||
| Voltage | AC100V±10% Note : Supports each country voltage | |||||
| Motor Frequency | 50/60HZ | |||||
| Work temp. | -10—40°C | |||||
| Outside dimension (WxHxD) | 228 x 207 x 210 (mm) | 420 x 330 x 290 (mm) | ||||
STANDARD ACCESSORIES／OPTIONS
| Type | ISTEC 200 | ISTEC 340 | |
|---|---|---|---|
| Standard | Cutting Blade | 3 pcs./set ※Note1 | 3 pcs./set※Note1 |
| Blade holder※Note5 | 1/4, 3/8,1/2 1 pc each (total 3 pcs) | 3/4-IpC ※Note 2 | |
| Adapter※Note3 | 1/4, 3/8 1 pc each (total 2 pcs) | 3/4-les X※Note 2 | |
| Internal burr remover ※Note4 | 1/4, 3/8,1/2 1 pc each (total 3 pcs) | x | |
| Hexagon wrench | 2.5, 3, 5mm 1 pc each (total 3 pcs) | 2.5mm 1 pc | |
| Tool box | 1 box | 1 box | |
| Instruction manual | 1 volume | olume | |
| Driving belt | lpc | 1 pc | |
| Chips receiver | lpc | 1 pc | |
| Blade | 10 pcs./set ※Note1 | 10 pcs/set ※Note1 | |
| Option (Sold separately) | Length measuring scale | o | |
| Chips receiver | O ※Note5 | O ※Note5 | |
| Cut piece receiver | X | O | |
| Option for 1/8 (Sold separately) | Standard set | Blade:lpc, Tube adapter :lpc Blade holder: 1 pc, Burr remover: lpc | |
| Cutting blade | 10 pcs./set |
※Note1：Cutting blades for 1/4, 3/8, and 1/2sizes are common (ISTEC200). 3/4, 1, 10A, 15A, 20A, 25A are common (ISTEC340)
※Note 2：Standard accessory is 3/4. Other sizes of 1, 10A, 15A, 20A, and 25A are options.
※Note 3： Blade holder and Adapter are required for each size.
No adapter is required for 1/2 inch of ISTEC 200.
※Note 4： Internal burr remover is for 1/4(inch)→ Thickness 1mm, 1/2(inch)→Thickness 1.24mm. (ISTEC200)
※Note 5： Available 1 piece as standard accessory . Also available for option as well.
OUTSIDE DIMENSION
