Japan, Kimoto Rubber Industry Co.
Kimoto Guard Bracket Corners
Product Made in Japan
Manufacturer: Kimoto
Model: Guard Bracket
What is Carstopper Corner Guard?
It buffers the impact of cars and trolleys hitting pillars and walls in parking lots and factories, and prevents damage to pillars and walls. It also reduces damage to cars, trolleys, etc. Even when a person hits the guard part, it becomes a cushion and the damage is reduced.
What is a guard bracket?
It is a batten type corner guard. Since the aluminum patch plate is firmly attached to the construction surface with screws, it can be prevented from falling off even if an impact is applied. In addition, the guard body is easy to replace because it uses a corner and a shock guard. It can be widely used as a cushioning material for pillars such as stores and condominiums, and pillars such as factories.
Specification
| material | Soft Vinyl Chloride Resin (PVC) |
|---|---|
| color | Yellow, Beige, Black, Grey |
| Unit of Measure | 1 pc |
| accessory | Patch plate (material: aluminum) * Screws are not included. Please use countersunk screws φ4~φ4.5. |
| End caps (sold separately) |
Yellow, Beige, Black, Grey (Material: Silicone Rubber) |
| Mounting method | Patch plate (screw fastening) |
| remarks | It is also possible to replace the guard part. (Compatible products: Corner-kun 35 without tape, shock guard 50, 65) |
| product | A | B | length | Weight (per 1m) |
|---|---|---|---|---|
| Bracket 35 | 8㎜ | 35㎜ | 1m、2m | 610g |
| Bracket 50 | 10㎜ | 50㎜ | 1m、2m | 995g |
| Bracket 65 | 14㎜ | 65㎜ | 1m、2m | 1,555g |
cross section
The number of holes in the cross-section varies depending on the size.
Guards and bats
Fit the patch plate into the groove of the guard part
End caps for guard brackets
Construction example
- ・ Protective materials for the corners of pillars and walls in parking lots, factories, schools, public facilities, etc.
Parking Lot Pillar Protection
It is used as a protective and cushioning material for parking lot pillars. Bracket 65 is attached.
Mounting method
● Both sides of the edge of the patch plate are sharp and easy to cut your hands, so wear gloves when working.
After determining the mounting position, attach the patch plate with screws. After that, fit the guard part.
Attach the end cap using adhesive.
* Please use an adhesive that can be bonded to soft vinyl chloride resin and silicone.
Replacement of the guard part is also available.
merit
- ・ The material is soft PVC and can be used for a long time. (Some materials differ depending on the product.) ）
- ・ Various sizes.
- ・ There is no color transfer like rubber.
- ・ You can also choose the construction method.
- ・ When made of rubber sponge, it has excellent cushioning.
demerit
- ・ There are few color variations.
- ・ Most of them are straight line specifications.
- ・ If the material is soft PVC, it does not have the same cushioning as a rubber sponge.
- ・ If it is made of rubber sponge, it is easy to tear and deteriorate over time.
Construction example
- ・ Protective materials for pillar corners and walls in parking lots, factories, schools, public facilities, etc.
- ・ Cushioning material for the wall of the parking lot
- • Overhead cushioning
- ・ Cover of the rising part of the flower bed of the nursery school or kindergarten
Pillar protection for store parking lots
Product: Guard Bracket 65 Yellow It is used as a protective and cushioning material for the corners of pillars in
store parking lots.
Vehicle cushioning materials for truck terminals
Product: D-type car stopper It is installed as a buffer material for vehicle impact in truck terminals.
Related Products
REQUEST QUOTATION
PAYMENT
LINK
