Toyo Keiki
Toyo Keiki VF-11M Series Wide Angle Meter
Product Made In Japan
Manufacturer: Toyo Keiki
Model: VF-11M Series
Features
1. A long scale meter for indicating wide angles.
2. A stepped scale plate removes any level difference between the scale and the tip of the needle, resulting in accurate readings.
3. Meter that has a bright scale due to the wide-cover lighting surface.
4. It is not affected by steel panels.
5. Can be manufactured with EL board (Electro-Luminescence Board) lighting.
6. The terminal cover is now equipped as standard.
7. It is now compatible with multi-setting set pointer models.
VF-1 1M Series List
Applicable Standards: JIS C 1102-1, 2, 3, 4, 5, 9
Part Name | □VF-11M | Notes Page | |||
---|---|---|---|---|---|
Model Name | Operating Principles | Accuracy Class | |||
Direct Current | Ammeter | DVF-11M | Permanent magnet Moving-coil type | 1.5 | 5 |
Voltmeter | 6 | ||||
Reception Meter | 5/6 | ||||
Alternating Current | Ammeter | SVF-11M | Rectifier type | 2.5 | 7 |
Voltmeter | 8 | ||||
Ammeter | SeVF-IIM | Electronic device type | 1.5 | 9 | |
Voltmeter | 10 | ||||
Ammeter | AVF-11M | Moving-iron type | 1.5 | 11 | |
Voltmeter | 12 | ||||
Reception Meter | SVF-11M | Rectifier type | 2.5 | 7/8 | |
1P Wattmeter | EVF-11M | Electronic device type | 1.5 | 13 | |
3P Wattmeter | |||||
3P4W Wattmeter | |||||
IP Varmeter | RVF-11M | Electronic device type | 1.5 | 13 | |
3P Varmeter | |||||
3P4W Varmeter | |||||
1P Power Factor Meter | UVF-11M | Electronic device type | 5.0 | 14 | |
3P Balanced Power Rate Meter | |||||
3P Unbalanced Power Factor Meter | UuVF-11M | ||||
3P4W Power Factor Meter | |||||
Frequency Meters | FVF-11M | Electronic device type | 0.5 | 18 |
Production Standards
☆Can be manufactured to 80×80 (mm) or 120×120 (mm) sizes. Please contact us for more details.
Note) See below for details on the recommended scale divisions.
Insulation Test : Between all circuits in a batch and outer casing …More than 10 MΩ (500V mega tester)
Between current circuit and voltage circuit …More than 5M (at 500V mega)
Voltage Test Between all measurement circuits in a batch and outer casing, and between current circuit and voltage circuit …maximum usable circuit voltage up to 600V. AC3320V for 5 seconds: CAT III 600V displayed at the bottom right of the scale plate.
If the maximum usable circuit voltage of 600V is exceeded, (2E+1000) V (E: Maximum usable circuit voltage [V])
Operating Environment
Operating Temperature: Limits −10°C to+50°C, Accuracy Assurance Range: +5°C to +40°C
Storage Temperature −20°C to +60°C
Relative Humidity Less than 80%
Operating Environment Indoor
Installation Height 2000m or less (See p.23 for details)
Special Specifications
(Can be manufactured to the following special specification by request.)
- Mounting posture other than vertical (Specification of installation angle required)
- With Red Set Pointer Single Setting Type, Multiple Setting Type
Special Scale: Conversion scale, zero center scale, colored scale, multiple scale, magnifed scale, specific symbol display, scale division increase in lines - Rod pointer (Rod pointer is used for multiple scales.)
- EL plate lighting (Color: green or orange) (See below)
- Special processing (heat processing, etc.)
- Other special specifications
Common Specifications for Meter with EL Plate Lighting
EL plate impressed voltage: 100/110V AC (Please contact us for uses with 200/220V AC and 100/110V DC.)
Outside Dimensions
Note) Accessories are attached externally as shown below for meters with EL plate lighting.
Unmarked items have accessories built-in, and the wiring method is as standard.
See the following pages for details on the outside dimensions of accessories and the wiring methods.
Specifications | Accessories |
---|---|
AC Voltmeter (Moving-iron Type) | M-4 A Series Resistor |
Wattmeter | ERG-3 Converter |
Varmeter | RRG-3 Converter |
Power Factor Meter | URG-3 Converter <br> Or <br> UuRG-3 Converter |