Japan, Magnescale
Magnescale LY71 Digital Readout
Made in Japan
Manufacturer: Magnescale Co., Ltd.
Model: LY71
Features
- Mounting extension boards enables various outputs.
- -BCD Output (Option)
- -Comparator Function: Relay / Open-collector (Option)
- Peak Hold Function Convenient for Statistical Measurement
- Convenient External Input Functions for Automatic Measurement
- Display Resolution Switching
- Data Storage
- Reset/Preset/Restart
- Detecting Reference Point of Measurement Unit
- Scaling
- Flicker Control
Specifications
| Specifications | ||
|---|---|---|
| Model | LY71 | |
| Specifications by application | – | |
| Number of input shafts | 1 or 2 axes (2-axis add function available; addition only is displayed when adding) | |
| Display | 7 digits and minus display, Color amber | |
| Display data | Current (1st axis, 2nd axis, addition axis), maximum, minimum and peak-to-peak values | |
| Input resolution |
| |
| Display resolution | Measuring unit input resolution or higher and supported inch units | |
| Input signal | A/B quadrature signal, Z signal (Conforms to EIA-422) | |
| Alarm display | Measuring unit disconnected, Excess speed, Maximum display amount exceeded, Power failure, Error in stored data | |
| Reset | Current value reset, Alarm cancel | |
| Restart | Restart of peak value calculation for each axis/all axes | |
| Preset | It is possible to store/edit up to three values for each axis. | |
| Master calibration function | The master calibration value is relocated when going past the reference point after the power is turned on. | |
| Reference point operations | It is possible to store/edit one value for each axis (when not using the master calibration function). | |
| Hold function |
| |
| Linear compensation | A fixed compensation amount is applied to the measuring unit’s count value. Compensation amount Standard: ±600 μm/m (Expanded: ±1000 μm/m) | |
| Scaling | 0.100000～9.999999 | |
| I/O |
| |
| Power supply | DC 12 V Rating 0.75 A Max. 1 A AC 100 V to 240 V ±10 % When using the AC adaptor PSC-22 (For U.S. only) or PSC-23 (For Europe and other countries) *Option | |
| Power consumption | MAX. 32 VA connected at the AC adaptor. | |
| Temperature | Operating : 0～40℃(non condensing) Storage : -20～60℃(non condensing) | |
| Mass | Approx. 1.5kg | |
Related Products
-
H.H.H Clamp Pulley/Rope Hoist
-
Fukuda FE 433 Z FE 400 Z type GMN Clutch
-
Vessel No.VCS-MB Color Sleeves (M-BLUE)
-
Nippon Chemical Screw PA/W(d-D-t) PA (nylon)/washer
-
Hasegawa Electric HST-20N High and Special High Voltage Detector
-
Yutani W Impact Wrenches – Pistol Rear Exhaust Type (Low Noise/Low Vibration Type).
