ISHIKAWA Welded Wire Mesh/ Fine Mesh

Made in Japan
Manufacturer: ISHIKAWA WIRE NETTING Co., Ltd.

Welded wire mesh is an economical and convenient reinforcing material that is well suited to super-high rise buildings. Compared to other reinforcing materials, it can withstand large loads, increasing the strength of concrete. The use of welded wire mesh reduces the thickness of walls and floors, which is highly effective in reducing the weight required for high-strength buildings. It also eliminates the need for laborious assembly and bundling on-site, which is effective in reducing manpower and work time.
Choose the best one for your application from a wide range of wire diameters, from ordinary iron wire to high-tensile special-shaped bar mesh.

Main Applications

Reinforcement for building floors, walls, ceilings, stairs, etc.
Reinforcement for roads and bridges
Paving of passageways within companies and factories
Reinforcement for pools, irrigation channels, revetments, and dam construction
Danger prevention shelves for exterior use in homes, gardens, and highways
Base support for roof underlayment materials (wood wool boards, etc.)

Standard dimensions (standard dimensions)

A Type	1m × 2m	2m²
B Type	2m x 4m	8m²
C Type	Order

Wire Mesh Standards Table

Annealed iron wire/welded wire mesh

Square type [JIS G3552 SWM-P]

JIS standard standard product Width 1M x 2M

Wire diameter (mm)	Space(mm)	Center to center (mm)	Opening ratio (mm)
6	194	200	94.10%
3.2	146.8	150	95.80%
Four	146	150	94.70%
Five	145	150	93.40%
5.5	144.5	150	92.80%
6	144	150	92.20%
2.6	97.4	100	94.90%
3.2	96.8	100	93.70%
Four	96	100	92.20%
Five	95	100	90.30%
6	94	100	88.40%
3.2	71.8	75	91.60%
6	69	75	84.60%
2.6	47.4	50	9.90%
3.2	46.8	50	87.60%
3.2	46.8	50	87.60%
Four	46	50	84.60%
Five	45	50	81.00%
6	44	50	77.40%
3.2	26.8	30	79.80%

■Long type [JIS G3552 SWM-P]

JIS standard standard product Width 2M x 2M

Wire diameter (mm)	Space length (mm)	Width(mm)	Center to center length (mm)	Width(mm)	Opening ratio (mm)
Four	46	96	50	100	88.3%

Annealed iron wire/deformed bar welded wire mesh

■Square type

Other specifications are made to order.

Wire diameter (mm)	Space(mm)	Center to center (mm)	Opening ratio (mm)	Width (mm)	Width (mm)
6	94	100	88.4%	1000	2000
				2000	4000
10	90	100	81.0%	1000	2000
				2000	4000
13	87	100	75.7%	1000	2000
				2000	4000
16	84	100	70.6%	1000	2000
				2000	4000
6	144	150	92.2%	1000	2000
				2000	4000
10	140	150	87.1%	1000	2000
				2000	4000
13	137	150	83.4%	1000	2000
				2000	4000
16	134	150	79.8%	1000	2000
				2000	4000
6	194	200	94.1%	1000	2000
				2000	4000
10	190	200	90.3%	1000	2000
				2000	4000
13	187	200	87.4%	1000	2000
				2000	4000
16	184	200	84.6%	1000	2000
				2000	4000
6	244	250	95.3%	1000	2000
				2000	4000
10	240	250	92.2%	1000	2000
				2000	4000
13	237	250	89.9%	1000	2000
				2000	4000
16	234	250	87.6%	1000	2000
				2000	4000
6	294	300	96.0%	1000	2000
				2000	4000
10	290	300	93.4%	1000	2000
				2000	4000
13	287	300	91.5%	1000	2000
				2000	4000
16	284	300	89.6%	1000	2000

SUS304 Stainless steel wire/welded wire mesh

■Square type [JIS G3552 SWM-P]

JIS standard standard product Width 1M x 2M
Other specifications are custom made products

Wire diameter (mm)	Space(mm)	Center to center (mm)	Opening ratio (mm)
3.2	146.8	150	95.8%
Five	145	150	93.4%
6	144	150	92.2%
2.6	97.4	100	94.9%
3.2	96.8	100	93.7%
Four	96	100	92.2%
Five	95	100	90.3%
6	94	100	88.4%
2.6	72.4	75	93.2%
3.2	71.8	75	91.6%
2.6	47.4	50	89.9%
3.2	46.8	50	87.6%
Four	46	50	84.6%
Five	45	50	81.0%
6	44	50	77.4%
3.2	26.8	30	79.8%

■Long type [JIS G3552 SWM-P]

JIS standard standard width: 2M x 2M.
Other specifications are made to order.

Wire diameter (mm)	Space length (mm)	Width(mm)	Center to center length (mm)	Width(mm)	Opening ratio (mm)
Four	46	96	50	100	88.3%

ISHIKAWA