※If the pressure exceeds the above, please contact us.
Japan, Kaneko Sangyo
Kaneko Sangyo KN Series Breather Valve
Manufactuer: Kaneko Sangyo
Model: KN Series
Summary
For the purpose of adjusting the internal pressure during the rise and fall of the internal pressure in the storage tank formula fixed roof, dispensing or eyeball of the contents, occur due to changes in atmospheric pressure and changes in atmospheric temperature and measure the safety of the tank it is a safety device that will be used.
Feature
Breather valve KN type is composed of the following four components broadly.
The combination inhalation air, released into the atmosphere, the vent suction, the vent discharge of features Burizabarubu, there is variation functional 8 pattern, for Burizabarubu type KN satisfies the 8 patterns by appropriately combining four parts in this you can.
Standard specification
KN1 SERIES
EJECTION OPERATING START PRESSURE+0.2~+5.0k
PaINHALATION OPERATING START PRESSURE-0.2~-5.0kPa
CONNECTION STANDARDJIS10K, JPI150, ANSI150
※If the pressure exceeds the above, please contact us.
KN2 SERIES
EJECTION OPERATING START PRESSURE: +0.2~+5.0kPa
INHALATION OPERATING START PRESSURE: -0.2~-5.0kPa
CONNECTION STANDARD: JIS10K, JPI150, ANSI150
※If the pressure exceeds the above, please contact us.
KN3 SERIES
EJECTION OPERATING START PRESSURE: +0.2~+5.0kPa
INHALATION OPERATING START PRESSURE: -0.2~-5.0kPa
CONNECTION STANDARD: JIS10K, JPI150, ANSI150
※If the pressure exceeds the above, please contact us.
KN4 SERIES
EJECTION OPERATING START PRESSURE: +0.2~+5.0kPa
INHALATION OPERATING START PRESSURE: -0.2~-5.0kPa
CONNECTION STANDARD:JIS10K, JPI150, ANSI150
※If the pressure exceeds the above, please contact us.
KN5 SERIES
EJECTION OPERATING START PRESSURE: +0.2~+5.0kPa
CONNECTION STANDARD:JIS10K, JPI150, ANSI150
※If the pressure exceeds the above, please contact us.
KN6 SERIES
EJECTION OPERATING START PRESSURE: +0.2~+5.0kPa
CONNECTION STANDARD:JIS10K, JPI150, ANSI150
※If the pressure exceeds the above, please contact us.
KN7 SERIES
INHALATION OPERATING START PRESSURE: -0.2~-5.0kPa
CONNECTION STANDARD: JIS10K, JPI150, ANSI150
※If the pressure exceeds the above, please contact us.
KN8 SERIES
INHALATION OPERATING START PRESSURE: -0.2~-5.0kPa
CONNECTION STANDARDJIS10K, JPI150, ANSI150
Related Products
-
DIJET RNMS-U-C Series Short Stub Straight Shank Tapper Neck Type
-
Ross Asia 19 Series Pilot Operated Check Valve Safety cat. 1 PL c, in-line mounting, right angle
-
YAMARI CERA THERMO Thermocouple
-
YOSHITAKE TA-3C-N Air Vent Valve
-
Line Seiki DK-5010E Tally Counters ( With Buzzer)
-
Kakuta No.HV451B Hold Down Clamp