This valve is lined by ceramic chips, has much-increased abrasion resistance, and is suitable for hardening and high line powder conveyer systems.
●With a modification for general valves, therefore it realized the economical and short delivery time. And it is possible to do machining complicated shapes also.
● the part of the port, is protected from peeling ceramic chips and erosion at thttedge part by lining L-shape corner chips.
●The linning chips are lined by a staggered row, and they can be protected against erosion and peeling on masonry joints.

Production Range
Connection Rating　：　JIS 10K, ASME 150#
Size　：　15Ａ(1/2”)～300Ａ(12”)
Material　：　SCS13A, SCS14A, SCS16Ａ, A216‐WCB, ＦＣＤ450, ＦＣ200 and others
Connection Rating　：　JIS 20K, ASME 300#
Size　：　15Ａ(1/2”)～250Ａ(10”)
Material 　：　SCS13A, SCS14A, SCS16Ａ, A216‐WCB and others
Ceramic Parts
Ceramics　：　Alumina92％
Chips　：　Chip(t1.5、t3)
Adhesive　：　Normal Temp. Harden type, Epoxy, or Silicon.
Max. Temp.：　Epoxy　below 150℃
Silicon  below 200℃
Abrasion resistance　：　20times(compared with FC200)
Chemical resistance　：　depends on chemical(Please contact and check us.)
Experience(powder fluid)
Fly Ash, Fine coal, Silica, Cement Powder, Plastics,  Calcium oxide, Casting sand, Mineral stone, Iron powder, Diatomite and so on

High hardness, high-speed powder conveyor system

Anti-static, Gland O-ring seal, Key-Rock, Long Bonnet, Special Painting, Oil&Water Free, Flushing Nozzle, Beveling port, etc