Just Corporation TGML Indicating Temperature Controller

Product Made in Japan
Manufacturer: Just Corporation
Model: TGML

Product Summary

●Multiple inputs that can be used with any sensor. PID auto-tuning function. PID self-tuning function. Upper and lower limit alarms are standard equipment. Control output is available in three models: relay contact, non-contact voltage (SSR), and current (4 to 20 mA output). Simple timer function. PC communication function (500 m max. 31 units can be connected)

Appearance and Dimensions

Specification

Control Output	Please select when ordering. * Relay contact…1a resistive load 3A * Non-contact voltage…SSR drive 12V * DC voltage…4 to 20mA
Alert	●Alarm 1, 2 (with upper and lower limits) ●Control action….ON-OFF ●Control action….ON-OFF action gap 1°C
Control Action	●PID auto-tuning function ●PID self-tuning function

■ Rating

Voltage	100 to 240V (allowable fluctuation range 85 to 264)
power consumption	10VA (max.)
Ambient temperature and humidity	0 to 50°C/35 to 85%

■Material

Outer case	Polycarbonate
Weight	240g

■ Settings and instructions

accuracy	±0.3% F.S.
Setting method	Flat Key
Display method: Numeric display	Numeric display: 7-segment LED, 3 digits

■ Terminal arrangement

Input

Measurement Input Signal	: Select one from the following entries
Input Range	: Simple programmable range

Input Type	range
Input Type	No decimal points	With decimal point
1, Pt100	1, -199 to 500°C	2, -199.9～500.0℃
2,K(CA)	2, -200 to 1372°C	4. -199.9 to 999.9℃
3,J(IC)	3. -200 to 850°C	6. -199.9 to 850℃

Product Number

	Part number	Sensor input No. *1	Range No. *2
Relay Contact Output	TGMLR	( )	( )
Non-contact voltage	TGMLS	( )	( )
DC current	TGMLA	( )	( )

Please use correctly

Power outage handling
Power Outage Detection	: Control stops when power outage is detected
Power outage	: Setting values, PID parameters, etc. are stored in non-volatile memory
When power is restored	: Automatic start
self-diagnosis
Calculation and control abnormalities:	Watchdog timer monitoring
Sensor input abnormality, disconnection	: Control stops, operation output reaches upper/lower limit