Hishiko KEGFA Series Electro Permanent Magnetic Chuck

Manufacturer: Hishiko Co., Ltd.
Model: KEGFA Series

Electro Permanent Magnetic Chuck For Grinding

Applications

Most suitable for high precision grinding and slicing.

As there is no heat generation in the chuck, hence reduction in accuracy on account of thermal displacement is difficult to occur.
Electro permanent magnetic chuck requires electrical power to switch ON and OFF the magnet for few seconds. During ON, built-in strong permanent magnets hold the workpiece.
Electric consumption can be reduced. Also it is safe because it can keep holding workpiece even if there is power failure or disconnection of wire during the operation.

Stock No	Model	Poles Width			Pole Pitch	Height	Base Plate		Lead Wire Length(m)	Weight (kg)	Recommended Controller
Stock No	Model	B1	L1	Le	Pole Pitch	H	B2	L2	Lead Wire Length(m)	Weight (kg)	Recommended Controller
S904101	KEGFA150×300	150	300	268	14 （12＋2）	85	144	344	2	25	HCC105APS1
S904102	KEGFA150×350		350	296				394		30
S904103	KEGFA150×450		450	408				494		38
S904105	KEGFA200×500	200	500	466	16 （14＋2）		190	544		56
S904106	KEGFA200×600	200	600	562	16 （14＋2）		190	644	3	67

※Large or powerful chuck (KEGX type) is also available.

Features

Adopt the latest power device and microcomputer control.
By high-speed switching using semiconductor, HCC series achieves excellent neutralization result in a short time.
Because there is no operating noise during neutralization, it is very quiet.

Stock No	Model	Dimensions (mm)			Input Power Source Voltage	DC Output Rating		Neutralization Duration(Sec.)	Weight(kg)	Note
Stock No	Model	Width	Height	Depth	Input Power Source Voltage	Voltage	Current	Neutralization Duration(Sec.)	Weight(kg)	Note
S9812520	HCC105APS1	130	256	151	AC100V/200V 50/60Hz Single phase	AC100V：DC5～85V AC200V：DC5～100V	5A（MAX）	2～19	2.5	Standard Model
S9812521	HCC105APS2	130	256	151	AC100V/200V 50/60Hz Single phase	AC100V：DC5～85V AC200V：DC5～100V	5A（MAX）	2～19	2.5	・External operation is possible. ・Outputting contact signal to external equipment is possible.
S9812523	HCC185APS1	130	256	151	AC200V 50/60Hz Single phase	DC5～180V	5A（MAX）	2～19	約2.5	Standard Model
S9812527	HCC185APS2	130	256	151	AC200V 50/60Hz Single phase	DC5～180V	5A（MAX）	2～19	2.5	・External operation is possible. Outputting contact signal to external equipment is possible.
S9812458	HCC1010P	300 (360)	400	200 (235)	AC100V/200V 50/60Hz Single phase	AC100V：DC5～85V AC200V：DC5～100V	10A（MAX）	2～19	11	with Control Box (come with 5m cable)
S9812459	HCC1810P	300 (360)	400	200 (235)	AC200V 50/60Hz Single phase	DC5～180V	10A（MAX）	2～19	11	with Control Box (come with 5m cable)

Note: Total electric current of connected chuck(s) must be within 90% of the maximum output current rating of the controller.