Hishiko
Hishiko KSFAH Series Electromagnetic Chuck For Cutting
Manufacturer: Hishiko Co., Ltd.
Model: KSFAH Series
Applications
KSFAH is the chuck for heavy duty-cutting for milling machine, planomiller,shaper, planer and etc.
Features
- Electromagnetic chuck with strong holding power and most suitable for heavyduty cutting for steel plate.
- Special design for minimizing effect of magnetism against cutter.
KSFAH-F Air Float Electromagnetic Chuck
- The face plate for air float type chuck has small holes. Air is blown out from these holes and the workpiace comes into floating stage.
Hence, even a large workpiece can be smoothly moved, and workpiece can be placed or removed easily without any scratch on the workpiece or the face plate
Specification (mm)
| Stock No | Model | Face Plate | Base Plate | Lead Wire Length (m) | Clamps (Pcs.) | Current (DC100V) | Recommended Rectifier | Recommended Controller | Weight (kg) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| B1 | L1 | Be | Le | a | b | B2 | L2 | ||||||||
| S910609 | KSFAH300×600 | 300 | 600 | 240 | 516 | 52 | 34 | 310 | 620 | 3 | 4 | 1.47A | KS80X3 | KNS0-A or HSC093E or HCC105AES1 | 130 |
| S910610 | KSFAH300×800 | 800 | 712 | 30 | 820 | 4 | 2.06A | 170 | |||||||
| S910615 | KSFAH400×600 | 400 | 600 | 340 | 516 | 34 | 410 | 620 | 3 | 6 | 2.13A | 170 | |||
| S910616 | KSFAH400×800 | 800 | 712 | 30 | 820 | 4 | 2.98A | 230 | |||||||
| S910617 | KSFAH400×1000 | 1000 | 916 | 29 | 1020 | 3.83A | – | KNS0-A or HCC105AES1 | 290 | ||||||
| S910621 | KSFAH500×800 | 500 | 800 | 440 | 712 | 30 | 510 | 820 | 3.66A | – | 230 | ||||
| S910622 | KSFAH500×1000 | 1000 | 916 | 29 | 1020 | 4.71A | – | HCC1010AE | 360 | ||||||
| S910623 | KSFAH500×1200 | 1200 | 1102 | 38 | 1220 | 5.23A | – | 440 | |||||||
Electromagnetic Chuck Rectifier KS
Applications
- Used for an electromagnetic chuck in combination with a controller.
| Stock No | Model | Dimensions(mm) | Input Voltage | Output Voltage | Current | ||
|---|---|---|---|---|---|---|---|
| Width | Height | Depth | |||||
| S980102 | KS80×3 | 150 | 60 | 100 | AC100V | DC90V | 3A |
| S980113 | KS100×5 | 320 | 225 | 200 | AC100V/200V | DC24～110V | 5A |
Chuck Controller with High Speed Neutralization Function HSC093E
Features
- Improved performance of the DEM function of the magnetic chuck.
- Added a function that allows you to judge and adjust the LED lamp to produce the optimal output waveform. It is now possible to easily set the DEM output.
- Operation by external signals is possible, making it easy to incorporate into equipment.
- It is more compact and less expensive than conventional controllers.
| Stock No | Model | Dimensions（mm） | Input Voltage | Output Voltage | Output Current | Neutralization Duration | Weight (kg) | ||
|---|---|---|---|---|---|---|---|---|---|
| Width | Height | Depth | |||||||
| S981249 | HSC093E | 130 | 240 | 80 | AC100V | DC90V | 3A（MAX） | max 13(Sec.) | 2 |
Electromagnetic Chuck Controller HCC-AE
Features
- Adopt the latest power device and microcomputer control.
- By high-speed switching using semiconductor, HCC series achieves excellent neutralization result in a short time. Because there is no operating noise during neutralization, it is very quiet.
| Stock No | Model | Dimensions (mm) | Input Power Source Voltage | DC Output Rating | Neutralization Duration | Weight (kg) | Note | |||
|---|---|---|---|---|---|---|---|---|---|---|
| Width | Height | Depth | Voltage | Current | ||||||
| S9812478 | HCC105AES1 | 130 | 256 | 151 | AC100V/200V 50/60Hz Single phase | AC100V：DC5～85V AC200V：DC5～100V | 5A （MAX） | 2～19(Sec.) | 2.5 | Standard Model |
| S9812479 | HCC105ES2 | 130 | 256 | 151 | AC100V/200V 50/60Hz Single phase | AC100V：DC5～85 AC200V：DC5～100 | 5A （MAX） | 2～19(Sec.) | 2.5 | ・External operation is possible. ・Outputting contact signal to external equipment is possible. |
| S9812456 | HCC1010AE | 300 (360) | 400 | 200 (235) | AC200V 50/60Hz Single phase | DC5～100 | 10A MAX） | 2～19(Sec.) | 11 | with Control Box (come with 5m cable) |
Note: Total electric current of connected chuck(s) must be within 90% of the maximum output current rating of the controller.
Related Products
REQUEST QUOTATION
PAYMENT
LINK
Copyright © Kouei Japan Trading | Get Quotation