Hishiko
Hishiko KELRM Round Electro Permanent Magnetic Holder
Manufacturer: Hishiko Co., Ltd.
Model: KELRM
Applications
You install KELRM as a gripper in an industrial robot to transport small workpieces.
Features
Switch KELRM ON and OFF with a very short energization time of 0.2 to 0.5 seconds (1 second at maximum).
KELRM works as a permanent magnet during ON. Hence the workpiece does not drop in sudden power loss or breaking wire.
Power consumption is very low.
KELRM requires rectifier as a power unit.
※The rectifier is sold separately.
Recommended rectifier is KS24EP and KS90EP series.
Specifications
| Stock No | Model | Dimensions(mm) | Tapped Hole | Stopper Hole | Voltage DC(V) | Current (A) | Max. Holding Power | Weight (kg) | ||
|---|---|---|---|---|---|---|---|---|---|---|
| φD | H | A | ||||||||
| S961202 | KELRM30 | 30 | 45 | 10 | M6 depth12 | 4depth3 | 24 | 0.9 | 220N (22kgf) | 0.22 |
Rectifier For Electro Permanent Magnetic Holder KS24EP/90EP
Applications
Used for the power source of KELRM electro permanent magnetic holder.
Features
KS24EP and 90EP can also use external signal for switching ON and OFF the holder.
The specification of KELRM is 24V DC; hence, it is necessary to connect 4 holders in series as one unit when you use KS90EP series
Recommended rectifier for KELRM and operable quantity.
| Rectifier＼Holder | KELRM30 | KELRM40 | KELRM60 |
|---|---|---|---|
| KS24×10EP | 10 | 8 | 4 |
| KS90×10EP | 40 | 32 | 16 |
| Stock No | Model | Dimensions(mm) | Input | Output DC(V) | Current(A) | Weight(kg) | ||
|---|---|---|---|---|---|---|---|---|
| Width | Height | Depth | ||||||
| S980151 | KS24×10EP | 230 | 100 | 155 | Single Phase AC100V | 24 | 10 | 4 |
| S980153 | KS90×10EP | 90 | 10 | 3 | ||||
