Toyo Keiki TMW Series Multi Power Meter

Product Made In Japan
Manufacturer: Toyo Keiki
Model: TMW Series

Features

  • Industry-first in adopting “Graphic LCD”
    The adoption of graphic LCD makes the measurement display screen different from conventional types.
    Display of time series” using a trend graph

    The trend graph displays previous measurements (power, etc.) in a time series.

    This shows the variation trend of the measurements at a glance.

    Various measurement displays
    Not only the conventional straight bar graph but also an arc-shaped bar graph are available. They can switch
    Up to 10 elements are display collectively
    The display screen can switch among one-element, four-element, and ten-element screens in real time. (See page 6.)
    On the ten-element screen, the measurement items of up to 35 elements can display by scrolling the screen (3P4W specification).
    Arbitrary VT and CT settings are possible
    The VT and CT values on the primary side can set arbitrarily to support special VT and CT.
    “Easy setting” (Setting support function provided)
    In the setting mode, the operation instruction is display at the bottom of the display screen. Therefore, setting is possible without the manual.

Specifications

Item Input range Display
Current (R, S, T) 0~5A (20A extension) Input current × CT ratio
Voltage (R-S, S-T, T-R) 0~150V or 0~300V
Note 1)
voltage × VT ratio
Active Power 0~1kW or 0~2kW
Note 1)
Input Power × CT ratio×VT ratio
Reactive Power LEAD 1kvar~LAG 1kvar
or LEAD 2kvar~LAG 2kvar
Note 1)
Input × CT ratio × VT ratio
Apparent Power 0~1kVA or 0~2kVA
Note 1)
× CT ratio × VT ratio
Power factor LEAD 0~1.0~LAG 0
Note 1)
LEAD 0.0~100.0~LAG 0.0%
Frequency 45Hz~65Hz 45.00Hz~65.00Hz
Watt demand 0~1kW or 0~2kW
Note 1)
Input × CT ratio × VT ratio
Amp demand 0~5A or (20A extension) Input current × CT ratio
Active energy Note 1) 0.000~999999.999kWh (MWh)
Incoming Wh : sign +Wh
outgoing Wh : sign -Wh
Reactive energy Note 1) 0.000~999999.999kvarh (Mvarh)
LAG 0.000~999999.999kvarh (Mvarh)
LEAD 0.000~999999.999kvarh (Mvarh)
Operating time 0~999999h
Current THD 0~100% Peak Value : 0~9.9A 0~100%
Voltage THD 0~100%, Peak Value
0~250V (Rated Voltage 110V)
0~500V (Rated Voltage 220V)
Note 1)
0~100%

note 1) Invalid for current specifications

② Aux. Power

Spec Voltage range Consumption
Worldwide power AC80~264V
DC80~143V
5VA
3W (27mA)
DC24V DC19~31V 3W (123mA)

③ Input specifications

Spec Rating Input range Consumption
1P2W / 1P3W / 3P3W 110V/220V, 100V/200V
5A
0〜150V/0〜300V
0〜5A(extension to 20A)
0.11VA/0.22VA
0.5VA
1P2W / 1P3W / 3P3W 440V
5A
0〜600V
0〜5A(extension to 20A)
0.44VA
0.5VA
3P4W 110/√3‾V/220/√3‾V
5A
〜150/√3‾V/0〜300/√3‾V
0〜5A(extension to 20A)
0.04VA/0.08VA
0.5VA
3P4W 440/√‾3V
5A
0〜600V/√3‾V
0〜5A(extension to 20A)
0.16VA
0.5VA

Note) exchange 1P2W, 1P3W, 3P3W spec and 110V, 220V input each other by setting

④ Output specifications

Output type Specification
Analog output DC4~20mA 0~550Ω
DC1~5V 600Ω~∞
MAX.4CH
Pulse output Active energy or Reactive energy
DC125V, AC125V 0.1A MAX.2CH
Relay output Upper alarm or Lower alarm
AC250V 5A
DC100V 0.3A, DC30V 5A
MAX.2CH
Transmission output RS-485
Protocol: MODBUS
Baudrate: 2400, 4800, 9600, 19.2k, 38.4kbps

(Note) Up to two point outputs are available for pulse output and alarm output.
Either of transmission output and pulse output (alarm output) is to be selected (see type name system).
Pulse output is output asynchronously with the display update interval.
Note that a time difference may be generated between the indicated value and the pulse number.

⑤ Remote input specification

The measurement items of the main display can be changed by applying a voltage from outside (Display screen 1 or Display screen 2).
Apply a voltage of 80 to 264 VAC or 80 to 143 VDC to the external input terminal (for 0.5 seconds or more). Each time a voltage is applied, the next item is selected.

TMW Series

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top