Japan, Tokyo Ko-on Denpa
Tokyo Ko-on Denpa FA-9100 Series Manual Control Fader
Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: FA-9100 Series
Features
Au-plated contact materials.
Horizontal style control-bar design (Protection against dust).
Durable system which adopted the shaft of the high quality.
For accurate adjustment (51positions). For reproducible necessary operation.
Electrical Specifications (Initial Value)
| Electrical specifications (initial value) | FA-9100 Series |
|---|---|
| Products | FA-910*-* |
| Number of circuits | 2 (Standard) |
| Circuit method | Potentiometer circuit |
| Total resistance (1-2), (7-6) | 10kohm |
| Total resistance tolerance | ±3% |
| Attenuation [Load: high] | 0, 1, 2, 3, …(1dB step)…, 40, 42, 44, 46, 48, 50, 55, 60, 65, 70, cut off |
| Attenuation accuracy [Load: high] | 0~20dB: ±0.2dB ~30dB: ±0.4dB ~40dB: ±0.6dB |
| Matching accuracy | 0~20dB: 0.5dB ~30dB: 0.7dB ~40dB: 1.0dB |
| Insertion loss | 0.5dB or less |
| Cut off (15kHz) | 90dB Min. |
| Voltage proof | 1 Min. at AC100V |
| Insulation resistance | 50Mohm or more at DC250V |
| Max rating | 0.1W |
| Maximum input voltage | DC20V or less |
| Sliding noise level | 47mV or less (by JIS C 6443) |
| Sliding life | 200,000 Cycles Min. (18cycles/min, Insertion loss: 1dB or less) |
| Connector (7pin) | B7B-EH (JST) |
Mechanical Specifications (Initial Value)
| Mechanical specifications (Initial value) | FA-9100 Series |
|---|---|
| Travel (Stroke) length | 100mm ±0.5mm |
| Operating force | 0.1 to 0.3N (Standard), 0.2 to 0.4N (High operating force) |
| Mechanical clicks | Without |
| Strength Nut-Attached | 100Ncm |
| Attached parts | M3 screw / 4-40UNC screw (Length: Panel thickness + 3mm) |
| Stopper strength | 40N |
| Push-pull strength | 40N |
| Alignment to the center | ±0.5mm (State not to pressure control-bar, Measurement position: Mounting surface) |
General Specifications
| General specifications | FA-9100 Series |
|---|---|
| Temperature range | -10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage) |
| Relative humidity | 90%RH (No condensation) |
Related Products
-
Eagle Jack (Konno Corporation) FN-200TL Claw Jack
-
Obishi Keiki Seisakusho OA-108 Small diameter roller Lenght , Step Automatic Measurement System
-
Chiyoda Seiki TKR-3000PH Series Large Flow/pilot Type Pressure Regulator (Primary pressure: 20.0 MPa or less/adjustment pressure 1.0 to 6.0 MPa, standard flow rate: 4800 m3/h・Air)
-
Hasegawa Electric HXA-70 Hot Line Proximity Detector Exclusively For Overhead Line Works
-
Watanabe RAC [Resistance temperature detector] with Lead Wire Element Replacement Type
-
Organo PF-R-SL Micro Filter
