Japan, Tokyo Ko-on Denpa
Tokyo Ko-on Denpa RR16G Series Rotary Switch
Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: RR16G Series
Features
Au-plated contacts
Applications
Various audio equipment, Communication facilities
Specifications
| Electrical Specifications – RR16G | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max rating | AC 100V 300mA. DC 100V 150mA | |||||||||||
| Contact resistance | 15mohm or less | |||||||||||
| Voltage proof | 1 Min. at AC250V | |||||||||||
| Insulation resistance | 100Mohm or more at DC500V | |||||||||||
| Rotational life (No-load) | 30,000 Cycles Min. (18 cycles/min, Contact resistance: Less than 100mohm) | |||||||||||
| Production range | Number of wafers | 1 | 2 | 3 | 4 | 5 | ||||||
| Number of Poles | 1 | 2 | 2 | 4 | 3 | 6 | 4 | 8 | 5 | 10 | ||
| Number of contacts per pole | 15 degrees | 23 | 11 | 23 | 11 | 23 | 11 | 23 | 11 | 23 | 11 | |
| 30 degrees | 11 | 6 | 11 | 6 | 11 | 6 | 11 | 6 | 11 | 6 | ||
| Mechanical Specifications – RR16G | |
|---|---|
| Indexing angle | 15 degrees, 30 degrees |
| Rotational torque | 2~6 Ncm (Varies by number of circuits) |
| Strength of Screw-Attached | 30 Ncm |
| Attached Parts | M2 x 3mm or M2.3 x 4mm |
| Stopper strength | 50 Ncm |
| Push-pull strength | 50 N |
| General Specifications – RR16G | |
|---|---|
| Temperature range | -10 to +60 degrees C (Operating), -15 to +65 degrees C (Storage) |
| Relative humidity | 80%RH (No condensation) |
Related Products
-
Orientalmotor MD Series DC Axial Flow Fans
-
Watanabe WKD-PA34F Power monitoring module
-
NAGANO KEIKI GC81 Digital Panel Meter:Measurement Solution
-
Eagle Jack (Konno Corporation) JUB 40 Steel Type Holding Block
-
Hammer Caster 700A Twin Wheel Caster
-
SAKUSAKU SC-42M-D Carbide Rotary Burr Cylinder Radius End Shape
