Product Made In Japan
Manufacturer: Yokota Industrial Co., Ltd.
Model: YD Series

Features

Impact driver (angle type)

High output and durability

Two-hammer mechanism

Two hammers strike the anvil with two strikes per rotation.
This structure allows for quick torque build-up and fast tightening speed.

Specification

Air pressure used	0.4MPa to 0.6MPa
Capable screw diameter	M3.0 to M5.0
No-load rotation speed (rpm)	9000
Air consumption under load (ℓ/min)	200
Tightening torque (N・m) (Reference value at 0.6MPa)	7.0 to 16.0
Overall length (mm)	220
Outer side from spindle center (mm)	14
Head height (mm)	27.5 (excluding spindle (socket insertion part))
Weight (kg)	1.2
Bit size (mm)	6.35 A-type bit compatible
Air intake (Rc)	1/4
Hose size used (mm x m)	6.5×5
Vibration (m/s²)	14.1
Noise (dB)
Regulator	none
Hammer Mechanism	Two Hammers
Striking part lubrication mechanism	Oil-infused
Standard accessories	Touch Joint 20-PM 1 piece, Hanger/Hanger Clip 1 piece

Note: The torque range is a guideline calculated from bolt testing. Select a tool that matches the workpiece conditions.