Japan, Miyawaki
Miyawaki G5 Ball Float Steam Traps
Manufacturer: MIYAWAKI Inc.
Model: G5
Features
Quick startup
Automatically discharges initial air and cold condensate. The diaphragm air vent follows the saturation temperature and prevents air and steam locking.
Condensate recovery
With its high degree of back pressure tolerance, this model supports condensate recovery.
High discharge capacity
A double ported balance valve provides a large discharge capacity in comparison with single valve models.
Typical applications
Suitable for uses including large-scale heat exchangers in various industries, and in things such as industrial plants, foodstuff devices, dyeing/cleaning devices, and air conditioning devices.
Dimensions/Weight
Flanged
| Size | Dimensions (mm) | Dimensions (in) | Weight | |||||||
| L | H1 | H2 | W | L | H1 | H2 | W | (kg) | (lb) | |
| 2” | 340 | 205 | 110 | 270 | 13.4 | 8.1 | 4.3 | 10.6 | 45,0 | 99.2 |
*Available flange standards: JIS 16K
With connection flange
|
Size |
Flange standards | Dimensions (mm) | Dimensions (in) |
Weight |
|||||||
| L | H1 | H2 | W | L | H1 | H2 | W | (kg) | (lb) | ||
| 2” | JIS 10K,16K,20K |
540 | 205 | 110 | 270 | 21.3 | 8.1 | 4.3 | 10.6 | 52,0 | 114.7 |
| ASME/JPI 150lb,300lb |
54,0 | 119.1 | |||||||||
| DIN PN40 (DN50) | |||||||||||
| 2 1/2” | JIS 10K,16K,20K |
560 | 22.1 | 54,0 | 119.1 | ||||||
| ASME/JPI 150lb,300lb |
570 | 22.4 | 57,0 | 125.7 | |||||||
| DIN PN40 (DN65) | |||||||||||
| 3″ | JIS 10K,16K,20K |
560 | 22.1 | 56,0 | 123.5 | ||||||
|
ASME/JPI |
570 | 22.4 | 60,0 | 132.3 | |||||||
| DIN PN40 (DN80) | |||||||||||
| 4″ |
JIS |
580 | 22.8 | 59,0 | 130.1 | ||||||
| ASME/JPI 150lb,300lb |
600 | 23.6 | 69,0 | 152.2 | |||||||
|
DIN PN40 (DN100) |
|||||||||||
*Available flange standards: ASME/JPI 150lb, 300lb, DIN PN16, JIS 10K, 16K, 20K
*Customized face-to-face dimensions on request.
*Please contact MIYAWAKI for further information.
Specifications
| Model | Connection | Max. operating
pressure |
Max. operating differential
pressure |
Max. operating
temperature |
Body
material |
||||
| Type | Size | PMO (MPa) | PMO (psig) | ⊿PMX (MPa) | ⊿PMX (psig) | TMO (℃) | TMO (℉) | ||
| G5-10 | Flanged
FF*1 |
2” | 1,0 | 145 | 1,0 | 145 | 235 | 455 | Ductile cast iron FCD450 |
| G5-16 | 1,6 | 230 | 1,6 | 230 | |||||
| G5-10R | Flanged
FF,RF*2 |
2”・2 1/2”・3″・4″ | 1,0 | 145 | 1,0 | 145 | |||
| G5-16R | 2”・2 1/2”・3″・4″ | 1,6 | 230 | 1,6 | 230 | ||||
*1 Available flange standards: JIS 16K
*2 Available flange standards: ASME/JPI 150lb, 300lb, DIN PN16, JIS 10K, 16K, 20K
This product uses a double ported balance valve system so if the actual condensate volume is significantly lower than the product’s discharge capacity, there may be a steam leak.
Discharge Capacity
The discharge line chart shows the discharge rate for condensate with a temperature 6℃ (11℉) lower than the saturation temperature.
Related Products
-
Chiyoda Seiki EX-400mkII – G2, G3 Second-stage Decompression Type Pressure Regulator For Equipment/line/panel Mount (Primary pressure: 20.0 MPa or less / Adjustment pressure: 0.1 to 0.6 MPa, Maximum flow rate: 50 L, 150 L/min-Air)
-
Super Tool GVC0.35E / 0.5E / 1E / 2E Lateral Lifting Clamp (Universal Shackle Type)
-
Nippon RASF Surface Roughness Standard Plate for Face Milling
-
Tohnichi I/O-FH256 Torque Verification Equipment
-
Nippon Chemical Screw PEEK GF30/MPH(M-L) PEEK/GF30 micro (+) pan head machine screw
-
Nippon Chemical Screw PEEK/CB(Thread size-L) PEEK/inch hexagon socket head bolt
REQUEST QUOTATION
PAYMENT
LINK
