Miyawaki
Miyawaki DC2R (for Sterilizers) Diaphragm Steam Traps
Manufacturer: MIYAWAKI Inc.
Model: DC2R (for Sterilizers)
Features
No condensate left over
Uses a thermoelement that starts to close at 5℃ (9℉) below saturation temperature.
No condensate is left behind in the orifice at the bottom of the body when the device stops, which prevents bacteria from forming.
Stainless steel
The body and main parts of the product are made from stainless steel, giving it superb corrosion-resistance.
Compact design
Can be installed in small spaces.
Easy maintenance
Less components make maintenance and inspection easy.
Typical applications
Suitable for industrial-use sanitizers.
Dimensions/Weight
| Size | Dimensions (mm) | Dimensions (in) | Weight | |||||||
| L | H1 | H2 | W | L | H1 | H2 | W | (kg) | (lb) | |
|
1/2” |
80 | 35 | 35 | 49 | 3.1 | 1.4 | 1.4 | 1.9 | 0,7 | 1.5 |
Specifications
| Model | Connection | Max. operating pressure | Max. operating pressure differential | Max. operating temperature | Valve opening temperature | Body material | |||||
| Type | Size | PMO (MPa) | PMO (psig) | (MPa) | (psig) | TMO(℃) | TMO(℉) | (℃) | (℉) | ||
| DC2R-16H | Inlet-side: Male screw (R) Outlet-side: Female screw (Rc) |
1/2” | 1,6 | 230 | 1,6 | 230 | 220 | 428 | 5℃ below saturation temperature | 9℉ below saturation temperature |
Stainless cast steel SCS13A/CF8 |
Maximum allowable pressure (PMA): 1,6MPa (230psig) (at 220℃ (428℉)) . PMA is the pressure that can be tolerated by pressure-resistant parts (body).
Maximum allowable temperature (TMA): 220℃ (428℉) (at 1,6MPa (230psig)). TMA is the temperature that can be tolerated by the main unit (body).
*Also available without orifice (DC2-16H).
Discharge Capacity
The condensate flow rate shown assumes a condensate temperature at approximately 10℃ (18℉) below saturation temperature.
Related Products
REQUEST QUOTATION
PAYMENT
LINK
