Fluke
Fluke 9600FLT 1 GHz Wide Offset Phase Noise Filter
Manufacturer: Fluke Calibration
Model: 9600FLT
Specifications
| General Specifications | |
| Dimensions | 130 mm (5.1 in) wide, 84 mm (3.3 in) high and 18 mm (0.7 in) deep. |
| Weight | 0.25 kg (0.6 lbs) |
| Connectors | Input and Output: SMA female |
| Mounting [1] | Suitable for self-supporting use or optional mounting to the model 9640A RF Reference Source left-side handle in bench top or rack mounted applications. |
| [1] The Filter is inserted between the 9640A front panel RF output and leveling head cable connectors, only when required for phase noise tests at 1 GHz output frequency. The leveling head cable connects directly to the front panel for all other applications. | |
| Performance Specifications | ||||
| Filter Type | Band-pass, narrow bandwidth | |||
| Frequency | 1 GHz | |||
| Impedance | 50 Ω | |||
| Offset Frequency (from 1 GHz) | ≤300 kHz[2] | 1 MHz | 3 MHz | 10 MHz |
| Insertion Loss | 2 dB | 2.5 dB | 5 dB | 17 dB |
| Rejection[1] | 0 dB | 0.5 dB | 3 dB | 15 dB |
| [1] Attenuation of phase noise sidebands relative to the carrier level when used to reduce wide offset phase noise of a 1 GHz signal source. | ||||
Related Products
-
Fluke 6102/ 7102/ 7103 Micro-Bath Thermometer Calibrators
-
Fluke 9132/ 9133 Portable Infrared Calibrators
-
Fluke 9009 Industrial Dual Block Calibrator
-
Fluke 7060/7080 Really Cold Temperature Calibration Baths
-
Fluke 7008/7037/7012/7011 Refrigerated Temperature Calibration Baths
-
Fluke 5322A Electrical Safety Tester Calibrator
