Avio HW-D Series Ultrasonic Handheld Welder

Manufacturer: Nippon Avionics Co., Ltd.
Model: HW-D Series

Features of HW-D Series

Peak power control mode equipped
When a boss is completely crushed in process of plastic caulking, load resistance to ultrasonic vibration increases, which makes sharp increase of power (W). Stable caulking quality can be obtained by controlling to stop oscillation when specified power is reached.

Supports minute work (60kHz)
Quick welding start contributes productivity improvement.
Suppress buckling of small size boss to contribute to higher yield.

Model		High-end type			Standard type
Model		HW-D250H-28	HW-D250H-40	HW-D200H-60	HW-D250S-28	HW-D250S-40
Maximum output		280W		240W	280W
Rated output		250W		200W	250W
Continuous output		180W		140W	180W
Frequency		28kHz	40kHz	60kHz	28kHz	40kHz
Oscillation method		Digital ATHMOS（Automatic frequency tracking）method
Oscillation control mode		Timer, Energy, Peak power, Continuous oscillation (Selectable)
Setting range	Timer	0.01 to 10.00s　(0.01s step)
	Energy	10 to 3000J　(10J step)
	Peak power*	50 to 250W		40 to 200W	50 to 250W
	Oscillation	Valiable 30 to 100%　(5% step)			Fixed (100%)
	Up slope	50/100/200/500ms　Selectable			50ms Fixed
Display		7 segment 4 digit LED, Status display LED
Welding result display function		Frequency(kHz), Oscillation time(s), Energy(J), Peak power(W) (Final result)
Protection function		Phase, Over current, FET, Over voltage, Over heat, Over time
Interface		I/O, Analog
Power input		AC100 to 240V single phase, 50/60Hz			AC100V　50/60Hz
Power Consumption		370VA		300VA	370VA
Environmental temprature		5 to 40℃
Environmental humidity		30 to 85%, No condensation
Size		W100×D250×H210mm
Weight		≒2.5kg

*Peak power is 5W step

Model	W2005-28-HP-P	W2005-40-HP-AL	MA1P200-60
Frequency	28kHz	40kHz	60kHz
Transducer trigger switch	Push button type
Housing case	Plastic	Aluminum
Hanging hook	Yes	N/A
Transducer cooling joint	Yes	N/A	Yes
Output cable length	2.5m
Outside diameter of grip	37mmφ		31mmφ
Weight	≒350g		≒200g