Suntes
Suntes DB-2050 Hydraulic disc brake
Manufacture: Suntes (Sanyo Shoji Co., Ltd.)
Model: DB-2050
Model code
Dimensions
Type (relative position of mounting foot and fuel filler port)
Specification
| Cylinder Size(inch) | 2･5/8 | 3 1/4 |
|---|---|---|
| Cylinder Area( cm2 ) | 34.89 | 53.49 |
| Hydraulic pressure used(MPa) | 0.5 to 9.81 *1 | |
| Required oil volume( cm3 ) | 7.0 | 10.0 |
| Disk outer diameter(mm) | φ380～500 | |
| Disc Thickness(mm) | 38.0 | |
| Effective Braking Radius(m) |  -37 | |
| Pad Type | DB-0401 | |
| Pad Effective Wear Allowance(mm) | 18.0 | |
| Pad Friction Coefficient(μ) | Dynamic: 0.3 Static: 0.15 *2 | |
| Hydraulic oil | Brake fluid (DOT3 equivalent) orMineral oil (equivalent to ISO VG32) | |
| mass(kg) | 17.5 | |
The minimum oil pressure used varies depending on individual differences in sliding resistance, etc., so it is a reference value only.
When using new pads, please break them in to obtain the required brake torque.
The friction coefficient in the specifications column is the value after breaking in.
Pressing force
Torque calculation T = 2 x μ x F x r
T: Torque (Nm)
μ: Pad friction coefficient
F: Pressing force (N)
r: Effective braking radius (m)
If you have any questions about specifications, please contact us.
The dimensions and specifications listed may be changed without notice for improvement purposes.
