Three S Co.Ltd
Three S C Series P/P Positioner CP
Manufacturer: Three S Co., Ltd.
Model : C series
Features
Compact and lightweight
Linear motion and Rotary motion available
Split range available
Easy calibration
AUTO / MANUAL function
Spec
| Specs | Standard | Option |
| Input signal | 20～100kPa | |
| Supply air pressure | 0.14～0.7MPa | |
| Stroke / open angle | 12～50mm, 40～100mm／60～90° | |
| Air connection | Rc1/4 (Pressure Gauges Rc1/8) | NPT1/4 (Pressure Gauges 1/8) |
| Pressure gauge | 0～0.2MPa 0～0.4MPa 0～1.0MPa | kPa / psi * / bar |
| Cam | Linear characteristics | Non-linear characteristics |
| Ambient temperature | -20～70℃ | Low temp.（L）－50～60℃ High temp.（H）0～100℃ |
| Material | Base: Aluminium Diecasting Cover: Aluminium Diecasting | |
| Weight | Approx. 1.4kgs |
| Specs | performance | |
| Single acting | Double acting | |
| Linearity | ±2.0% | |
| Hysterisis | 1.0% | |
| Repeatability | 0.5% | |
| Sensitivity | 0.5% | |
| range of supply air puressure | 0.3％／0.01MPa | |
| posture torelance 10°／90° | 0.2％／4.0％ | |
| Resistance against vibration | 1%／1G | |
| Air consumption (Nl/min) | 5/0.14MPa | 11/0.4MPa |
| at output 50% | ||
| Max Cv (Nl/min) | 60／0.14MPa | 140／0.4MPa |
| at output fully vented | ||
Attention for usage of pneumatic instruments
* Clean and dry air (dew point -30 or below) is required.
* Air filter 5μm or smaller is required.
All specifications are subject to change without prior notice.All figures are effected by the valve/actuators.
* No domestic sales in japan due to Non-SI unit.
