Manufacturer: Osaka Manufacturing Co., Ltd.
Model: A40
Product: Protec Sheet

Description

A40

Standard Dimensions
Original size: 0.6mm (thickness) × 1,040mm (width) × 30m (length)

• 1 × 1: 920 × 920mm
• 1 × 2: 920 × 1,920mm
• 2 × 2: 1,900 × 1,920mm
• 2 × 3: 1,900 × 2,920mm

Notes:

• Uses woven P-aramid threads.
• Grid pitch approximately 500mm.
• Custom sizes available upon request.
• P-aramid threads have a long-term heat resistance of 260°C.

Material Properties

• Weight (g/m²): 978
• Tensile Strength (N/3cm): 1,138 × 1,128
• Tensile Elongation (%): 3.0 × 4.0
• Tear Strength (N): 96 × 82

Features and Safety

• Exceptional performance in blocking molten metal splashes.
• Highly stable and resistant to weathering, including sunlight, UV rays, and ozone exposure.
• No need for water treatment as required for conventional fireproof sheets, making on-site handling easier.
• Flexible material ensures excellent handling, storage, and transportability.
• Does not emit toxic gases.
• No dust release.
• Heat resistance for continuous use at temperatures up to 250°C (silicone-coated side).

⚠ Danger

If mishandled, this product may result in death, serious injury, or property damage.

1. Do not perform welding, fire-handling, or other related operations in the vicinity of flammable substances, such as oils or solvents, regardless of whether the sheet is covering the area or not. There is a risk of fire or explosion.

⚠ Warning

If mishandled, this product may result in death, serious injury, or property damage.

1. When performing welding, always follow the appropriate safety regulations and welding procedures.
2. Never perform the following, as it may lead to serious accidents, such as fire or explosions:
   • Use near highly flammable or volatile chemicals.
   • Let sparks or flames come into direct contact with the sheet.
   • Use a burner directly on the sheet surface.
   • Place or pull heavy objects across the sheet.
3. Do not use the product if there are cracks, holes, or burn marks.
4. Avoid using the product in ways other than its intended purpose or in areas not suitable for its use, such as poorly ventilated spaces.
5. The fire-resistant silicone-coated side (gray) should face the heat source. If the natural-colored glass-fiber side is exposed to fire, the silicone coating may peel or become damaged.

For continuous use:

• The gray side (silicone-coated) must face the heat source. If the natural-colored glass-fiber side faces the heat source, the silicone coating may peel.