MAEDA KOKI MKTV Type Oil Signal

Manufacturer: Maeda Machinery Research Institute Ltd.
Model : MKTV type

Features

It shows flow quantity by viewing. Because use a transparent taper pipe, with a ball (or a float) and the indication red line.
It can confirm approximate flow quantity by looking at the position concerned.
With flow quantity adjustment valve. By adjusting a miniature valve a ball (or a float) at the position of the indication red line.
Setting of the flow quantity that is necessary by putting it together is possible.
The installation direction does not matter. The posture when attach it as use a spring inside looks up and look down; and it can perform sideways-facing freely.

Model
MKTV □* –□TL

Kind of the oil□
(or viscosity □ cSt of the oil)

Common use flow quantity
□L/min

An example: Kind ISOVG32 common use flow quantity 3L/min of the MKTV25-2TL oil
※The model in case of the connection R screw is MKTV25- □It becomes TOL. An example: MKTV25-3TOL

Fluid		Oil
Connection (the exit side)		Rc internal thread	The change to R screw is possible, too. The connection of the valve becomes only the R screw.
Heat-resistant temperature		A maximum of 80 degrees Celsius	–
Withstand pressure		1MPa	–
Materials	Transparent taper pipe	Acrylic	–
	Coupling	C3604 (brass)	–
	Spring	SUS304	–
	Nylon ball	Nylon 66	I may use a cylindrical float.
	Miniature valve	BC	The production at the valve with the check nut is possible, too.

Fluid		Oil
Connection (the exit side)		The reference mentioned above	–
Heat-resistant temperature		A maximum of 80 degrees Celsius	–
Withstand pressure		1MPa	–
Materials	Transparent taper pipe	Acrylic	–
	Coupling	C3604 (brass)	–
	Cap nut	C3604 (brass)	–
	Zipper sleeve	Cu	–
	Spring	SUS304	–
	Nylon ball	Nylon 66	I may use a cylindrical float.
	Miniature valve	BC	–