Fuji Tool, Hand Tools, Japan, TOOLS & EQUIPMENT
Fuji Tool Edge Finder Ceramic Type
Product Made in Japan
Manufacturer: Fuji Tool
Features
Used in the spindle of a machine such as a mill to accurately locate the centre of a workpiece.
Material | Probe:Ceramics(ZrO2) Shank:Steel(SKS) |
---|---|
Hardness | HRC58° |
Repeated Accuracy | ±0.002mm |
Specification
Code No. | Model | Shank | Probe | Length | Proper Rotation |
---|---|---|---|---|---|
07-703 | CER-10 | φ10 | φ10 | 84 | 500~750rpm |
07-704 | CER-32A | φ32 | φ10 | 104 | 500~750rpm |
07-803 | CEZ-10 | φ10(19) | φ10 | 80 | 450~600rpm |
The ceramic probe(ZrO2) cuts off magnetism and without iron powder attached. Outstanding wear-resistance.
How to use
1. Equip the shank of the edge finder to a drill chuck or milling chuck; manually shift the probe slightly off its centre and let it rotate eccentrically.
2. Gently move the rotating edge finder closer and closer to the measured workpiece; when contact is established, eccentricity gets smaller. The probe (tip) then stops rotating.
3. Gently shift the probe again to make contact with the workpiece; the probe then will slide along the surface of the workpiece. This position is the reference position distanced 5mm away from the probe diameter.
Related Products
-
Kurimoto HS Hammer Crusher
-
Kunimoto Storage Box M BS Type
-
NISSAN TANAKA K, B/Z, C/S Small Cutting Machine
-
Ross Asia Miniature precision series Port sizes 1/8″ and 1/4″. Flow rates up to 40 scfm (1133 l/min)
-
Kyowa L-5 2-wire parallel vinyl wire Lead wire L lead wire
-
SAKUSAKU GYG72120 Square End Mill 2-Flute