A0-500M Hex-S Set Screws (Cup-P (Nagai))
Model: A0-500M
Dia range:M1.6～M5
Length range:2～12
Iron (or standard).
Plain, Trivalent zinc cr+3 color white, Trivalent zinc cr+3 color black, Nickel,…
Unit: mm
| Thread Nominal(d) | M1.6 | M1.7 | M2.0 | M2.5 | M2.6 | M3.0 | M3.5 | M4.0 | M5.0 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pitch(P) | 0.35 | 0.35 | 0.4 | 0.45 | 0.45 | 0.5 | 0.6 | 0.7 | 0.8 | ||
| dz | Max | 0.8 | 0.8 | 1.0 | 1.2 | 1.2 | 1.4 | 1.75 | 2.0 | 2.5 | |
| Min | 0.55 | 0.55 | 0.75 | 0.95 | 0.95 | 1.2 | 1.5 | 1.75 | 2.25 | ||
| df | Approximately the Minor Diameter of External Thread | ||||||||||
| e | Min | 0.803 | 0.803 | 1.003 | 1.427 | 1.427 | 1.73 | 1.73 | 2.30 | 2.87 | |
| s | Min | 0.711 | 0.711 | 0.889 | 1.27 | 1.27 | 1.50 | 1.50 | 2.0 | 2.5 | |
| Wrench Size | 0.7 | 0.7 | 0.9 | 1.3 | 1.3 | 1.5 | 1.5 | 2.0 | 2.5 | ||
| t | Min | 1st Type | 0.7 | 0.7 | 0.8 | 1.2 | 1.2 | 1.2 | — | 1.5 | 2.0 |
| 2nd Type | 1.5 | 1.5 | 1.7 | 2.0 | 2.0 | 2.0 | 2.2 | 2.5 | 3.0 | ||
* The value of t (Min) is applied based on the nominal length (Ω), using either 1 shelf or 2 shelves.
1-shelf applicable range:
– M1.6–M1.7: ≤ φ2.0mm
– M2.0–M3.0: ≤ φ2.5mm
– M2.5–M2.6: ≤ φ3.0mm
– M4.0: ≤ φ4.0mm
– M5.0: ≤ φ5.0mm
(M3×3.0 uses a deep hole specification of 1.65)
