A0-501A Hex-S Set S (Flat-P (Ansco))
Model: A0-501
Dia range:M2～M12
Length range:2～60
Iron (or standard), Stainless steel (303, 304,…).
Plain, Zinc blue cr6+, Zinc yellow cr6+, Trivalent zinc cr+3 color white,…
Unit: mm
| Thread nominal size (d) | M2 | M2.5 | M2.6 | M3 | M4 | M5 | M6 | M8 | M10 | M12 | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pitch (P) | 0.4 | 0.45 | 0.45 | 0.5 | 0.7 | 0.8 | 1.0 | 1.25_ | 1.5 | 1.75 | |
| dp | Max | 100 | 1J0 | 1.50 | 2.00 | 250 | 35 | 4.0 | 5.5 | 7.00 | 8.50 |
| Min | 0.75 | 1.25 | 1.25 | 1.75 | 2.25 | 3.2 | 3.7 | 5.2 | 6.64 | 8.14 | |
| df | Approximately, the minor diameter of the external thread | ||||||||||
| e | Min | 1.011 | 1.454 | 1.427 | 1.733 | 2.303 | 1873 | 3.443 | 4.583 | 5.723 | 6.863 |
| s | Nominal dimension | 0.90 | 1.30 | 1.30 | 1.50 | 2.0 | 2.50 | 3.0 | 4.0 | 5.0 | 6.0 |
| Max | 0.913 | 1.300 | 1.300 | 1.580 | 2.080 | 2.580 | 3.080 | 4.095 | 5.140 | 6.140 | |
| Min | 0.887 | 1.275 | 1.270 | 1.520 | 2.020 | 2.520 | 3.020 | 4.020 | 5.020 | 6.020 | |
| t | Min※ | 0.8 | 1.2 | 1.2 | 1.2 | 1.5 | 2.0 | 2.0 | 3.0 | 4.0 | 4.8 |
| 1.7 | 2.0 | 2.0 | 2.0 | 2.5 | 3.0 | 3.5 | 5.0 | 6.0 | 8.0 | ||
※ The minimum value of t depends on the nominal length (l); either column 1 or column 2 is applied.
1Applicable range for each column ＝
M2: length ≤ 2 mm
M2.5 / M2.6 / M3: length ≤ 3 mm
M4: length ≤ 4 mm
M5: length ≤ 5 mm
M6 / M8: length ≤ 6 mm
M10: length ≤ 10 mm
M12: length ≤ 12 mm
