A0-503A Hex-S Set S (Dog Point (Ansco))
Model: A0-503A
Dia range:M3～M12
Length range:4～60
Iron (or standard), Stainless steel (303, 304,…).
Plain, Zinc blue cr6+, Zinc yellow cr6+, Trivalent zinc cr+3 color white,…
| Thread Nominal (d) | M1.4 | M1.6 | M1.7 | M2 | M2.5 | M2.6 | M3 | M4 | M5 | M6 | M8 | M10 | M12 | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pitch (P) | 0.3 | 0.35 | 0.35 | 0.4 | 0.45 | 0.45 | 0.5 | 0.7 | 0.8 | 1.0 | 125 | 1.5 | 1.75 | ||||
| Tip End | dp | Max | 0.70 | 0.80 | 0.80 | 1.00 | 1.50 | 1.50 | 2.00 | 2.50 | 3.5 | 4.0 | 5.5 | 7.00 | 8.50 | ||
| Min | 0.45 | 0.55 | 0.55 | 0.75 | 1.25 | 1.25 | 1.75 | 2.25 | 3.2 | 3.7 | 5.2 | 6.64 | 8.14 | ||||
| df | Approximately the minor diameter of the external thread | ||||||||||||||||
| e(1) | Min | 0.803 | 0.809 | 0.803 | 1.011 | 1.454 | 1.427 | 1.733 | 2.303 | 2.873 | 3.443 | 4.583 | 5.723 | 6.863 | |||
| S | Nominal dimension | 0.70 | 0.70 | 0.70 | 0.90 | 1.30 | 1.30 | 1.50 | 2.0 | 2.50 | 3.0 | 4.0 | 5.0 | 6.0 | |||
| Max | 0.724 | 0.724 | 0.724 | 0.913 | 1.300 | 1.300 | 1.580 | 2.080 | 2.580 | 3.080 | 4.095 | 5.140 | 6.140 | ||||
| Min | 0.711 | 0.710 | 0.711 | 0.887 | 1.275 | 1.270 | 1.520 | 2.020 | 2.520 | 3.020 | 4.020 | 5.020 | 6.020 | ||||
| t | Min | 1Column | 0.6 | 0.7 | 0.7 | 0.8 | 1.2 | 1.2 | 1.2 | 1.5 | 2.0 | 2.0 | 3.0 | 4.0 | 4.8 | ||
| 2Column | 1.5 | 1.5 | 1J | 1.7 | 2.0 | 2.0 | 2.0 | 2.5 | 3.0 | 3.5 | 5.0 | 6.0 | 8.0 | ||||
| Tip Shape | z | Short Tip | Max | 0.60 | 0.65 | 0.65 | 0.75 | 0.88 | 0.88 | 1.00 | 125 | 1.50 | 1.75 | 2.25 | 2.75 | 3.25 | |
| Min | 0.35 | 0.40 | 0.40 | 0..50 | 0.63 | 0.63 | 0.75 | 1.00 | 1.25 | 1.50 | 2.00 | 2.50 | 3.00 | ||||
| Old Standard | Max | (4) (5) | (5) (6) | (6) (8) | (6) (8) | (8) (10) | (10)(12) | (12)(14/15)(16) | |||||||||
| 1.25 1.75 | 1.75 2.25 | 2.25 3.25 | 2.25 3.25 | 3.25 4.3 | 3.25 4.3 | 4.3 5.3 6.3 | |||||||||||
| Min | 1.0 1.5 | 1.5 2.0 | 2.0 3.0 | 2.0 3.0 | 3.0 4.0 | 3.0 4.0 | 4.0 5.0 6.0 | ||||||||||
| Long Tip | Max | 0.95 | 1.05 | 1.05 | 1.25 | 1.50 | 1.50 | 1.75 | 2.25 | 2.75 | 3.25 | 4.3 | 5.3 | 6.3 | |||
| Min | 0.70 | 0.80 | 1.00 | 1.00 | 1.25 | 1.25 | 1.5 | 2 | 2.5 | 3 | 4 | 5 | 6 | ||||
0 dimensioning method uses S.
