A0-5030 Hex-S Set Screws (Dog Point)
Model: A0-5030
Dia range:M3～M24
Length range:3～150
Iron (or standard), SUS316L, Stainless steel (303, 304,…).
Plain, Zinc blue cr6+, Zinc yellow cr6+, Trivalent zinc cr+3 color white,…
Unit: mm
| Screw Nominal Diameter (d) | M3 | M4 | M5 | M6 | M8 | M10 | M12 | M14 | M16 | M20 | M24 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pitch (P) | 0.5 | 0.7 | 0.8 | 1.0 | 1.25 | 1.5 | 1.75 | 2.0 | 2.0 | 2.5 | 3.0 | ||
| dp | Max | 2.0 | 2.5 | 3.5 | 4.0 | 5.5 | 7.0 | 8.5 | 10 | 12.0 | 15.0 | 18.0 | |
| Min | 1.75 | 2.25 | 3.2 | 3.7 | 5.2 | 6.64 | 8.14 | 9.64 | 11.57 | 14.57 | 17.57 | ||
| df | Approximately the minor diameter of the external thread | ||||||||||||
| e | Min | 1.733 | 2.303 | 2.873 | 3.443 | 4.583 | 5.723 | 6.863 | 6.863 | 9.149 | 11.429 | 13.716 | |
| s | Nominal | 1.5 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 6.0 | 8.0 | 10.0 | 12.0 | |
| Max | 1.58 | 2.08 | 2.58 | 3.08 | 4.095 | 5.14 | 6.14 | 6.14 | 8.175 | 10.175 | 12.212 | ||
| Min | 1.52 | 2.02 | 2.52 | 3.02 | 4.02 | 5.02 | 6.02 | 6.02 | 8.025 | 10.025 | 12.032 | ||
| t | Min | (a) | 1.2 | 1.5 | 2 | 2 | 3 | 4 | 4.8 | 4.8 | 6.4 | 8 | 10 |
| (b)※3 | 2 | 2.5 | 3 | 3.5 | 5 | 6 | 8 | 8 | 10 | 12 | 15 | ||
| z | (a)Short Tip | Max | 1 | 1.25 | 1.5 | 1.75 | 2.25 | 275 | 3.25 | 3.8 | 4.3 | 5.3 | 6.3 |
| Min | 0.75 | 1 | 125 | 1.5 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | ||
| (b)Long Tip※3 | Max | 1.75 | 2.25 | 2.75 | 3.25 | 4.3 | 5.3 | 6.3 | 7.36 | 8.36 | 10.36 | 12.43 | |
| Min | 1.5 | 2 | 2.5 | 3 | 4 | 5 | 6 | 7 | 8 | 10 | 12 | ||
| (a) is applicable for total length ℓ | Max | 5 | 6 | 6 | 8 | 10 | 12 | 16 | 16 | 20 | 25 | 30 | |
Note
※1: For full lengths where (a) applies, apply 120° chamfering. For longer lengths, apply 90° chamfering.
※2: The approx. 45° angle applies to the inclined area below the thread valley diameter.
※3: When the full length is longer than the range applicable for (a), apply (b).
