●Energy saving with inverter control of compressor

The compressor is driven by a DC inverter, reducing power consumption by 63% compared to previous models (RAXE2400B).

Power consumption

Power consumption

Hard to stop even under high load

● Suitable for ambient temperatures of 50℃

Reduces the risk of stopping even in harsh summer conditions. (Hard to stop)

Corrosion-resistant dryer

Nickel-plated copper pipes are used for the refrigerant pipes of the heat exchanger to achieve high corrosion resistance.

A stainless steel pipe specification that further improves corrosion resistance is also available as a manufacturer’s option.

● Further evolution from previous models

Uses low GWP refrigerant R32

Compared to our previous model that uses R407C, CO2 emissions (equivalent value) can be reduced by approximately 78%.

● Supports pressure dew point of 3°C (correction coefficient setting)

Drain outlet can be selected from the left or right

*RAXE2400B, RAXE3900B models only

Drain discharge direction can be selected according to the installation location.

Drain outlet

・Features (RAXE14800B1-W to 29600A1-W)

● Energy saving mode switching of dew point temperature

In addition to the pressure dew point of 10°C, a pressure dew point of 18°C ​​can be selected. This allows for significant energy savings during high temperature periods. It also makes it possible to prevent condensation caused by the difference in temperature with the outside air, reducing equipment costs such as insulation costs. In addition, a function has been added that automatically changes the pressure dew point setting in conjunction with the outside air temperature. This eliminates the hassle of having to manually change the pressure dew point according to the season.

* When the load (air flow rate, intake air temperature, etc.) is low, the dew point will be lower than the selected value (10°C, 18°C).