Nikki Co., Ltd.
Nikki NLFL Series LED Floodlight
Manufacturer: Nikki Co., Ltd.
Model: NLFL Series
Features
Lightning strikes and lightning discharges can destroy electronic products including LEDs, but the NLFL series is a safe LED floodlight with a uniquely designed protection circuit that can withstand inrush currents, surges, and momentary power outages, and also has high insulation properties.
The light body is also lightweight, making it ideal for outdoor work lighting at construction sites, etc. The LEDs used are from a globally reliable manufacturer.
Application Examples
| When used alone | Suitable for fixed installation to illuminate buildings and warehouses. |
|---|---|
| Use with floor stand | It is easy to carry and is suitable for on-site work such as civil engineering and construction. |
| Use with tripod stand | Available in single or double lamp configurations, you can choose the level of brightness you require. Suitable for outdoor construction site lighting where brightness is required. |
Specification
| Color Temperature | 5,700K |
|---|---|
| Expected Life | Operating temperature 25℃ 60,000 hours *Life is the point at which the illuminance becomes 70% of the initial illuminance. |
| Color rendering | Ra80 |
| Operating temperature | -10℃ to 40℃ (but do not freeze) |
| Protection rating | IP65 |
| Main unit | Aluminum die casting |
| rubber seal | Silicone rubber |
| Power Consumption | 28W / 45W |
| power supply | AC100V to 240V |
| power cable | 3m (VCT0.75mm2 x3C ) |
| Compliance standards |  |
| accessories | Hexagonal bolt/concave washer |
|---|---|
| option | Tripod stand (with special bag) TP-20B (for NLFL30) TP-30B (for NLFL30 50) |
| Floor stand FS-30 (for NLFL30) FS-50 (for NLFL50) | |
| 3m cable with rainproof plug (VCT0.75mm 2 x3C) *Compatible voltage 100V |
Safety-designed tempered glass
Unlike conventional halogen lamps or incandescent lamps, LED lighting does not emit light by heating a filament, so the main body of the LED light does not become extremely hot.
Previously, it was necessary to attach a protective cover to prevent people from getting burned by touching the floodlight, but LED floodlights generate little heat, so they are safe to touch with your hands. For this reason, they have a simple exterior design without a protective cover.
The body is made of die-cast aluminum for a sturdy structure.
The glass on the surface is 4mm thick, so even if it breaks, the glass will shatter into small pieces, so there is no risk of injury.
NLFL floodlight, broken glass fragments
NLFL Body when glass breaks
Flickerless
Flickering can cause eye fatigue and can also cause problems such as vertical lines appearing when taking pictures with a digital camera, making it impossible to take pictures, but this product is flicker-free and comfortable.
When photographing a metal surface with this product, the light is uniform and gentle, with no flickering or stripes.
Conventional LEDs can have dotted patterns or flickering, resulting in striped patterns.
Dustproof and waterproof
This LED floodlight has a protection rating of IP65 and is dustproof and waterproof.
It can be used outdoors, such as at civil engineering and construction sites.
Surge Protection
It has a uniquely designed protection circuit that can handle inrush currents, surges, and momentary power outages, and is a safe design with high insulation.
The LEDs we use are from globally reliable manufacturers.
Thorough lightning protection
The current-isolating design quickly diverts induced lightning surges, protecting products from lightning strikes. (It can discharge up to 10kA with a surge waveform of 8/20μs.)
When lightning strikes or lightning discharges occur, induced lightning surges occur in power lines, destroying many electronic devices. This product has a built-in lightning surge protection element.
±6kV between lines, ±15kV to earth
3 times the international standard, 3.75 times the international standard
SPD (Lightning Protection Device)
This LED floodlight is protected by limiting sudden, violent current fluctuations (surges) caused by lightning and other events.
A typical lightning strike generates a surge of several tens of kV or more, but this LED floodlight has an SPD installed between the power supply IC and ground, so that even if a lightning surge enters the building during a lightning surge, it is discharged from the SPD to ground.
*When installing, be sure to ground the product.
Strong wind measures
Our floodlights (NLFL30/50) use a knob bolt to make it easy to adjust the angle, but by replacing it with the included hex bolt and concave washer, the mounting part will not break even in strong winds and the floodlight can be used as an outdoor installation floodlight.
*Knob bolts are not included with NLFL80/100/150/200.
Tightening the bolts
NLFL30-AC: 6-8Nm
NLFL50-AC: 10-12Nm
NLFL80/100-AC: 22-30Nm
NLFL150/200-AC: 44-60Nm
For outdoor installation (accessory)
NLFL30-AC: Hexagon bolt M5-15Lx2, concave washer ø15.4×2
NLFL50-AC: Hexagon bolt M6-17Lx2, concave washer ø16.5×2
*Please use the flat washers and spring washers that come with the product when purchased.
Standard Model List
| Model | Total luminous flux | Illuminance (1m) | power supply | Power Consumption |
| NLFL30-AC-S | 2,860lm | 1,220lx | AC100-240V | 28W |
| NLFL50-AC-S | 4,880lm | 2,070 lx | 45W | |
| NLFL80-AC | 8,900lm | 3,300lx | 80W | |
| NLFL100-AC | 11,200lm | 4,100lx | 100W | |
| NLFL150-AC | 15,600lm | 5,600lx | 150W | |
| NLFL200-AC | 19,700lm | 6,970 lx | 180W |
The “-S” model comes with a diffusion cover that reduces glare.
