Nikki Co., Ltd.
Nikki NLB-V Series Rechargeable LED Light List

Manufacturer: Nikki Co., Ltd.
Model: NLB-V Series
Features
This is a handy rechargeable LED light with a built-in lithium-ion battery.
It can illuminate a wide area like a fluorescent light, making it ideal for use as an emergency light during power outages caused by natural disasters, as a work light indoors and outdoors, and as an inspection light for factory equipment. It is not a spot light like a conventional flashlight, so it cannot illuminate far away, but it can brightly illuminate a wide area around you.
The body is made of polycarbonate, which is highly rigid, shock-resistant, and lightweight. It is equipped with overcharge and overdischarge protection circuits, so you can use it with peace of mind.
Application Examples
Indoor and outdoor work lights, inspection lights for factory equipment, and emergency lights during power outages
It can illuminate a wide area and is waterproof, so it can be used for outdoor work, outdoor activities, and night fishing. In addition, it has a built-in magnet on the back so it can be fixed to a metal surface, making it ideal as an inspection light for factory equipment and as auxiliary lighting in places that are difficult to reach with ceiling lights. It is also useful to have it as an emergency light or warning light.
Specification
Color Temperature | 5,700K |
---|---|
Operating temperature | -10℃ to 40℃ (but do not freeze) |
Protection rating | IP65 |
Main unit | Polycarbonate |
Power Consumption | 3W / 5.4W |
Charging port | Micro USB |
Three-level dimming function | Full light (H) 1/2 (M) 1/3 (L) |
Flash function | Press and hold for 3 seconds |
magnet | Built-in magnet on the back |
Compliance standards | ![]() |
Accessories | Magnet handle (ND-P11) |
---|---|
Charging adapter (ND-PM242) | |
Fall prevention strap | |
Option | Extension magnet (ND-P13) |
End magnet (ND-P14) |
Waterproof (IP65)
The protection rating is IP65. The dustproof performance is “6” so dust cannot get inside, and the waterproof performance is “5” so it is not affected even if water hits it from any direction.
Wide range diffuse irradiation
It does not emit a spot light like a typical flashlight, but instead emits a diffuse light over a wide area.
Charges in about 2.5 hours and lights up for up to 12 hours
The built-in lithium-ion battery is quick-charging and can be fully charged in about 2.5 hours.
It can be lit for up to 12 hours.Equipped with overcharge and overdischarge protection circuits. These circuits are activated when the battery is overcharged or overdischarged, preventing damage to the lithium-ion battery and allowing for safe use.
3-level dimming
The three-level dimming function (H, M, L) allows you to adjust brightness and battery consumption.
Low: Gentle brightness, 12 hours of light
Mid: Medium brightness, 5 hours of light
High: Very bright light, 2 hours of light
Can be used while charging
Since it can be turned on while charging, it can be used as an auxiliary light while working and also as a handy light in emergencies or when traveling.
Standard Model List
Model | Total luminous flux | Illuminance (0.5m) | Power Consumption | Lighting time | Charging time | Charging voltage | Battery |
NLB03V | 360lm | 400lx | 3.5W | 2 hours (H) 5 hours (M) 12 hours (L) | 2.5 hours | USB 5V/1A | Lithium-ion battery 3.7V/1850mAh |
NLB06V | 750lm | 820lx | 6W | 2.75 hours | USB 5V/2A | Lithium-ion battery 3.7V/3700mAh |
Main dimensions
NLB-V
Model/Dimensions (mm) | A |
---|---|
NLB03V | 205 |
NLB06V | 325 |
Access
Standard accessories
Magnet Handle
Model number: ND-P11
Charging adapter
Model number: ND-PM242
Input voltage: AC100V
Output voltage/current: DC5V/2A
Cable length: 1.8m
Fall prevention strap
Fall prevention strap
Option
Expanding Magnet
Model number: ND-P13
End Magnet
Model number: ND-P14
Option – Magnet usage example
ND-P13
By freely sliding the magnetic part, you can set it up to fit the spacing between chairs and pipes, even in places like the one in the image.ND-P14
It can stand on its own as shown in the image, or it can be attached directly to a metal plate on a wall using a magnet.