W2-I010 C Snap Ring (S (JIS (Iwata)))
Model: W2-I010
Iron (or standard), Stainless steel (303, 304,…).
Plain.
JIS Standard C-Type Ring (for Shaft Use)
Unit: mm
| Ring No. | Shaft dia (S) | JIS RING DIMENSIONS | GROOVE DIMENSIONS | When spring over shaft | Allow Thrust Load (Ring) Safety Factor = 4 SK85M or SK85 [N] | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inside dia. | Thickness | Hole dia. | Groove dia | Groove width | ||||||||
| D1 | Tolerance | t | Tolerance | d | G | Tolerance | W | Tolerance | ||||
| JG – 10 | 10 11 12 13 14 | 9.3 10.2 11.1 12.0 12.9 | ±0.15 | 1.00 1.00 1.00 1.00 1.00 | ±0.4 | 1.5 1.5 1.7 1.7 1.7 | 9.6 10.5 11.5 12.4 13.4 | +0 -0.09 | 1.15 1.15 1.15 1.15 1.15 | +0.14 -0 | 17 18 19 20 22 | 8,041 8,826 9,611 9,807 10,787 |
| JG – (11) | +0 -0.11 | |||||||||||
| JG – 12 | ±0.18 | |||||||||||
| JG – (13) | ||||||||||||
| JG – 14 | ||||||||||||
| JG – 15 | 15 16 17 18 19 | 13.8 14.7 15.7 16.5 17.5 | 1.00 1.00 1.00 1.20 1.20 | 1.7 1.7 1.7 1.7 2.0 | 14.3 15.2 16.2 17.0 18.0 | 1.15 1.15 1.15 1.35 1.35 | 23 24 25 26 27 | 11,768 12,749 13,729 16,671 17,652 | ||||
| JG – 16 | ||||||||||||
| JG – 17 | ||||||||||||
| JG – 18 | ±0.05 | |||||||||||
| JG – (19) | ||||||||||||
| JG – 20 | 20 21 22 24 25 | 18.5 19.5 20.5 22.2 23.2 | ±0.2 | 1.20 1.20 1.20 1.20 1.20 | 2.0 2.0 2.0 2.0 2.0 | 19.0 20.0 21.0 22.9 23.9 | +0 -0.21 | 1.35 1.35 1.35 1.35 1.35 | 28 30 31 33 34 | 18,633 19,613 20,594 22,555 23,536 | ||
| JG – (21) | ||||||||||||
| JG – 22 | ||||||||||||
| JG – (24) | ||||||||||||
| JG – 25 | ||||||||||||
| JG – 28 | 28 29 30 32 | 25.9 26.9 27.9 29.6 | 1.50 1.50 1.50 1.50 | 2.0 2.0 2.0 2.5 | 26.6 27.6 28.6 30.3 | 1.65 1.65 1.66 1.65 | 38 39 40 43 | 33,343 34,323 36,285 38,246 | ||||
| JG – (29) | ||||||||||||
| JG – 30 | ||||||||||||
| JG – (32) | +0 -0.25 | |||||||||||
| JG – (34) | 34 35 36 38 40 | 31.5 32.2 33.2 35.2 37.0 | ±0.25 | 1.50 1.50 1.75 1.75 1.75 | 2.5 2.5 2.5 2.5 2.5 | 32.3 33.0 34.0 36.0 38.0 | 1.65 1.65 1.90 1.90 1.90 | 45 46 47 50 53 | 41,188 42,169 50,014 52,956 55,898 | |||
| JG – 35 | ||||||||||||
| JG – (36) | ±0.06 | |||||||||||
| JG – (38) | ||||||||||||
| JG – 40 | ±0.4 | |||||||||||
| JG – (42) | 42 45 48 50 52 | 38.5 41.5 44.5 45.8 47.8 | 1.75 1.75 1.75 2.00 2.00 | 2.5 2.5 2.5 2.5 2.5 | 39.5 42.5 45.5 47.0 49.0 | 1.90 1.90 1.90 2.20 2.20 | 55 58 62 64 66 | 58,840 62,763 67,666 80,415 83,357 | ||||
| JG – 45 | ||||||||||||
| JG – (48) | ||||||||||||
| JG – 50 | ||||||||||||
| JG – (52) | ||||||||||||
| JG – (56) | 56 60 65 70 72 | 51.8 55.8 6.8 65.5 67.5 | ±0.45 | 2.00 2.00 2.50 2.50 2.50 | 2.5 2.5 2.5 2.5 2.5 | 53.0 57.0 62.0 67.0 69.0 | +0 -0.3 | 2.20 2.20 2.70 2.70 2.70 | 71 75 81 86 88 | 90,221 96,105 127,486 140,235 142,196 | ||
| JG – 60 | ||||||||||||
| JG – 65 | ||||||||||||
| JG – 70 | ||||||||||||
| JG – (72) | ||||||||||||
| JG – 75 | 75 78 80 85 | 70.5 73.5 74.5 79.5 | 2.50 2.50 2.50 3.00 | 2.5 2.5 2.5 3.0 | 72.0 75.0 76.5 81.5 | 2.70 2.70 2.70 3.20 | 92 85 97 103 | 147,100 156,906 159,848 205,940 | ||||
| JG -(78) | ||||||||||||
| JG – 80 | ||||||||||||
| JG – 85 | ±0.07 | +0 -0.35 | +0.18 -0 | |||||||||
| JG – 90 | 90 95 100 105 | 84.5 89.5 94.5 98.0 | ±0.55 | 3.00 3.00 3.00 4.00 | 3.0 3.0 3.0 3.0 | 86.5 91.5 96.5 101.0 | 3.20 3.20 3.20 4.20 | 108 114 119 125 | 215,746 225,553 235,306 333,426 | |||
| JG – 95 | ||||||||||||
| JG – 100 | ||||||||||||
| JG – (105) | +0 -0.54 | |||||||||||
| JG – 110 | 110 115 120 125 | 103.0 108.0 113.0 118.0 | 4.00 4.00 4.00 4.00 | 3.0 3.0 3.0 3.5 | 106.0 111.0 116.0 121.0 | 4.20 4.20 4.20 4.20 | 131 137 143 148 | 353,039 362,846 382,459 402,073 | ||||
| JG – (115) | ||||||||||||
| JG – 120 | ||||||||||||
| JG – 125 | +0 -0.63 | |||||||||||
