Nikki Co., Ltd.
Nikki MF Series Precision Lock Nuts
Manufacturer: Nikki Co., Ltd.
Model: MF Series
Features
The set screw is angled at 30 degrees to the axial direction and is designed to be divided into three parts (equally spaced 120 degrees apart).
This is a high-precision lock nut with a polished finish that has runout accuracy of less than 3 microns in the thread direction.
Therefore, by tightening the set screws evenly from three directions, it is easy to achieve concentricity with the shaft, allowing for stable assembly with high precision and little runout in the axial direction in a short amount of time.
It can be used when assembly space is limited.
Specification
| Material | SCM440 |
|---|---|
| hardness | HRC28-32 |
| accuracy | ISO 4H |
Standard Model List
Model number | Size | Set screw | |||||
| D | h | g | t | d | Maximum torque Nm | Standard | |
| MF15×1.0P | 34 | 16 | 4 | 2 | 26 | 8 | M6 |
| MF17×1.0P | 36 | 5 | 28 | ||||
| MF20×1.0P | 38 | 18 | 32 | ||||
| MF25×1.5P | 42 | 36 | |||||
| MF30×1.5P | 48 | 43 | |||||
| MF35×1.5P | 53 | 48 | 18 | M8 | |||
| MF40×1.5P | 58 | 20 | 6 | 2.5 | 52 | ||
| MF45×1.5P | 65 | 59 | |||||
| MF50×1.5P | 70 | 64 | |||||
| MF55×2.0P | 75 | twenty two | 7 | 3 | 68 | 18 | M8 |
| MF60×2.0P | 80 | 73 | |||||
| MF65×2.0P | 85 | 78 | |||||
| MF70×2.0P | 92 | twenty four | 8 | 3.5 | 84 | ||
| MF75×2.0P | 98 | 90 | |||||
| MF80×2.0P | 105 | 96 | |||||
| MF85×2.0P | 112 | 104 | |||||
| MF90×2.0P | 118 | 26 | 10 | 4 | 108 | ||
| MF95×2.0P | one two three | 113 | |||||
| MF100×2.0P | 128 | 118 | |||||
*There are 6 hook grooves for M100 and above. M100 and above are made to order.
