Manufacturer: DataLink
Model: Enet- FR/232

Features

• • Enet-HDLC-RoHS and Enet-HDLC/AC operate in Asynchronous Balanced Mode (ABM) and support LAP-B procedure class.
  • The Enet-HDLC/PLL series is a higher-end version of the Enet-HDLC series.
  • It includes a built-in PLL function, allowing connection to HDLC devices that do not output a transmission synchronization signal.
  • Synchronization is possible without a clock signal, using the PLL function.
  • Enet-FR and Enet-FX are communication devices that support HDLC free run and have built-in UDP/IP protocols.
  • These devices can communicate with host computers via UDP/IP.
  • The Ethernet side includes UDP/IP and TELNET as standard.
  • UDP/IP socket communication is used to interact with Enet-FR and Enet-FX.
  • TCP/IP connections can be opened or closed from either the Enet-HDLC side or the host side.
  • Communication settings, Ethernet-related addresses, etc., can be configured interactively in program mode and are stored in FLASH ROM.
  • Settings can be made by:
    Connecting a cable to the HDLC port (temporarily used as RS232C or RS422 during setup).
    Or by using TELNET login from Ethernet.
  • The Ethernet port supports 10Base-T/100Base-TX (auto-switching).
  • The Enet-HDLC/AC can be DIN rail-mounted using the optional bracket (model: DRA-1).
  • The HDLC port is selectable:
    D-sub 25-pin female (RS232C)
    D-sub 15-pin female (RS422)
  • Connector shapes:
    RS232C type: D-sub 25-pin female
    RS422 type: D-sub 15-pin female (for both Enet-HDLC-RoHS and Enet-HDLC/AC)

Specifications