Nippon Oil Pump NOP
Nippon Oil Pump Orbmark Motor ORB-SB With Mechanical Brake
Manufacturer: Nippon Oil Pump Co., Ltd.
Model: ORB-SB
Features
- Hydraulic motor with mechanical brake to secure stopping power
- Made in Japan quality
- Long product life and anti-rust structure by multiplate wet brake system
- Tough structure for radial load by designated bearing in output shaft
- Safety and serured operation by specific brake mechanism
Specifications
| Size | Theoretical Displacement (cm3/rev) | Normal Continuous Revolution (rpm) | Normal Continuous Flow rate ℓ/min (US gal/min) | Max. Instantaneous Flow rate ℓ/min (US gal/min) | Normal Continuous Torque (N・m) | Max. Instantaneous Torque (N・m) | Normal Continuous Pressure △P MPa (psi) | Max. Instantaneous Pressure △P MPa (psi) | Permissible Back Pressure MPa (psi) | Approx. Weight kg (lbs) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| B10/B20 | B30 | ||||||||||
| 050 | 54.0 | 1034 | 57 (15.05) | 68 (14.96) | 110 | 135 | 15.5 (2248.09) | 19.0 (2755.72) | 7 (1015.27) | 15.1 (33.29) | 15.9 (35.05) |
| 070 | 71.4 | 790 | 76 (16.72) | 153 | 183 | 15.3 (33.73) | 16.1 (35.49) | ||||
| 100 | 98.5 | 588 | 210 | 246 | 15.5 (34.17) | 16.3 (35.94) | |||||
| 120 | 118.4 | 478 | 252 | 300 | 18.5 (2683.20) | 15.8 (34.83) | 16.6 (36.60) | ||||
| 130 | 129.0 | 438 | 250 | 330 | 14.0 (2030.53) | 15.9 (35.05) | 16.7 (36.817) | ||||
| 160 | 165.3 | 346 | 322 | 383 | 17.0 (2465.65) | 16.2 (35.72) | 17.0 (37.48) | ||||
| 190 | 189.8 | 307 | 363 | 432 | 16.3 (35.94) | 17.1 (37.70) | |||||
| 205 | 205.0 | 273 | 403 | 475 | 16.5 (36.38) | 17.3 (38.14) | |||||
| 240 | 235.5 | 240 | 395 | 495 | 12.0 (1740.46) | 15.5 (2248.09) | 16.7 (36.82) | 17.5 (38.58) | |||
| 280 | 282.5 | 201 | 410 | 479 | 10.5 (1522.90) | 12.5 (1812.98) | 17.1 (37.70) | 17.9 (39.46) | |||
| 310 | 306.9 | 184 | 440 | 519 | 17.3 (38.14) | 18.1 (39.90) | |||||
| 380 | 376.4 | 151 | 464 | 531 | 9.0 (1305.34) | 10.5 (1522.90) | 17.8 (39.24) | 18.6 (41.01) | |||
| 410 | 409.9 | 138 | 470 | 555 | 8.5 (1232.82) | 10.0 (1450.38) | 18.1(39.90) | 18.9 (41.67) | |||
- 1: Do not drive motor with max. torque/max. pressure in more than 6 seconds.
- 2: Recommended hydraulic oil: ISO-VG32 or same class.
- 3: Usage of spline shaft is recommened if max. torque is more than 280N・m.
- 4: Input pressure must be less than 21MPa (3045.80psi) at maximum.
- 5: Max. permissible back pressure is 7MPa (1015.27psi), but in the case of operating with more than 1.8MPa (261.07psi), drain piping is required to implement to protect oil seal.
- 6: ΔP means difference pressure.
