Manufacturer: KTC.
Model: AE901

Features

• It is a special tool for holding automobile engines.
• Compatible with the engine of a normal car from a mini car of an FF car. (Excluding fenders and strut towers, models without front support mounting bolts, trucks, and 1 box)
• Maximum working load: 2,450N (250kgf) or less
• Compatible with shock-absorbing body vehicles that have been adopted in many cars in recent years.
• Even if the fender has a slope or a forward downward slope, it is possible to set it stably parallel to the ground.
• It is not compatible with conventional products, the fender ribs are short, and it is also compatible with car models that cannot be set between fenders.
• It is possible to move the vehicle and lift and lift the engine while holding the engine.
• Since the bridge can be set diagonally, it is possible to use the bridge from the top of the belt when replacing the belt.
• Adopt a winch with an after-attach method. The drive can be easily replaced left and right, and can be moved to any position.
• Even when the vehicle is lifted, the winch can be controlled remotely by means of the chain foil.
• It cannot be used on models with resin set points or models without mounting bolts at the set points. (Set point: Bolt to set the foot)