Manufacturer: KTC.
Model: ATG9012.

Features

• It is a simple tester that displays the amount of skidding (side slip) of the wheels caused by driving just by passing the front wheel of the car.
• Both boards have meters, so you can check the left and right sides at the same time.
• Applicable vehicle types are from light vehicles with a tire width of 280 mm or less to 2t class cargo vehicles.
• Simple type that does not require installation work. It is small and lightweight and can be moved.
• Since the left and right sides are independent, it is a separate type that can be used for various vehicle widths.
• The height of the main body is low (28mm) and the slope is smooth to enter.
• Needle placement method in which the displayed value remains at the maximum value. The 0-point adjustment is as simple as returning the needle with your finger.
• The display range is wide from 0 ~ 20 mm / m for both IN and OUT, and it also supports imported cars.
• There is also a setting of side slipboard set ATG92 that the meter is only on one side and checks one side at a time.
• This product is not an automobile inspection device. (This is for simple measurement before vehicle inspection)

Specifications