- Home
- Products
- Wadeco Microwave Position Detection Sensor for Steel Equipment (4ch Type) Microgun MWS-ST/SR-2WG
WADECO Corporation
Wadeco Microwave Position Detection Sensor for Steel Equipment (4ch Type) Microgun MWS-ST/SR-2WG

Manufacturer: Wadeco Corporation
Model: MWS-ST/SR-2WG
Features
- No license requiredNo
radio station license required, saving the cost and hassle of applying for a license. - The detection distance is three
times longer than that of our company. The waveguide length can be lengthened. - The use of the rotating microwave system, which does not cause malfunctions due to reflected waves, improves detection accuracy with almost no malfunctions caused by reflections from detected objects or surrounding objects, and chatter due to phase interference between direct waves and reflected waves.
- The antenna that is OK
in adverse environments can be used at high temperatures. Microwaves are largely unaffected by high temperatures, water vapor, flames, and dust. - The transmitting and receiving areas without
beam axis deviation are conical in shape, so there is no need to adjust the beam axis during installation, and it can be reliably detected without worrying about malfunctions due to beam axis misalignment. - With detection mode switch,
you can choose between shatter detection or transmission detection. - You can select a channel number that does not
interfere with the set and install up to 4 pairs of microguns in close proximity. - With
reception level and sensitivity setpoint display One of the 15 LEDs is lit to display the reception level in 15 levels. On the other hand, one of the 15 LEDs is illuminated dim to display the sensitivity setpoint. The setpoint and reception level margin are visible at a glance, making it easy to adjust and maintain. - With analog output (optional)
Analog output (4mA~20mA) receives the received power. It can detect objects by catching even the slightest change in received power without missing it. In addition, the received power can be monitored, so failures can be detected before they occur. - With a viewing window (optional)
With a viewing window that shows the reception level and sensitivity setting value at a glance. - Adopts an IC semiconductor relay that is resistant to contactless output
vibration. - IP65 equivalent degree of protection
Related Products
-
Wadeco Dust Intrusion Prevention Device DPS-150
-
Wadeco Digital Tension Controller TC-3B
-
Wadeco DC Digital Voltage Regulator DCR-4
-
Wadeco Millimeter-Wave Rangefinder For Powder Equipment Milliranger MWS-B79RF-B
-
Wadeco Digital Tension Controller TC-6B
-
Wadeco Microwave PCI Flow Meter Microflow MWS-MF-1