Manufacturer: Wadeco Corporation
Model: TC-5B

Features

• When two points of empty tension and groove tension are set, the voltage is output proportional to the measured value of the counter between the two points, making tension setting easy and tension control continuous.
• The tension for any winding thickness can be checked before operation, and the winding thickness and tension values can be constantly monitored during operation.
• With output contacts that output at the full roll value or “0” of the winding thickness. It can be used as a preset counter.
• You can switch to an external tension setter or connect an external calculator to compensate for inertia when starting or stopping.
• It is equipped with an auxiliary input terminal that inputs the displacement of the dansa roller or other voltage plasma or minus and increases or decreases the output of the wind thickness value.
• The output meter is a digital display and can be switched between a voltmeter and an ammeter.
• The tension setter is a multi-dial with lock. The setpoint can be locked and the tension can be fine-tuned.
• It has a built-in 15 V, 50 mA DC sensor power supply and ±a 15 V, 10 mA DC auxiliary power supply.
• With memory by built-in battery.
• The display of unnecessary upper digits is eliminated, and the numerical values can be read directly using the zero-suppress method.
• Small, lightweight and compact.