Sanwa EM7000 Analog Multitesters

Manufacturer: Sanwa Electric Instrument Co., Ltd
Model:EM7000

Features

High-sensitivity FET electronic tester with high input resistance (2.5M – 12MΩ for DCV) and 0.12μA range (DC current)
Frequency response against 40Hz to 1MHz of sine wave (AC low voltage)
Measurement of P-P value (Peak to Peak value) of square wave pulse (duty cycle 20% or higher)
Wide range resistance measurement from 0.2Ω to 200MΩ
The operator does not need to perform zero adjustment before measurement, since the instrument is an electronic tester.

Specifications

Function	Measuring range		Tolerance
DCV	0.3/1.2/3/12/30/120/300/1000V（2.5～12MΩ)		±3% of full scale
±DCV	±0.15/0.6/1.5/6/15/60/150/600V（2.5～12MΩ)		±7% of full scale
AC voltage rms(50/60Hz)	3V（approx.2.5MΩ）/12V（approx.1.1MΩ） 30V/120/300V（approx.800KΩ）/750V（approx.10MΩ)		±3% of full scale
ACV P-P	Sine wave	8.4V（approx.2.5MΩ/V）/33V（approx.1.1MΩ） 84/330/840V（approx.800KΩ)	±5% of full scale
	Square wave	8.4V（2.5MΩ)	±6% of full scale
	Triangle wave	8.4V（2.5MΩ)	±6% of full scale
DCA	0.12μ/0.3m/3m/30m/300m/6A		±3% of full scale
DCA	±0.06μ/±0.15m/1.5m/15m/150mA		±7% of full scale
ACA	6A		±5% of full scale
Resistance	2k/20k/200k/2M/20M/200MΩ		±3% of arc
Low-frequency output	-10～51dB		±3% of arc

Frequency characteristic	AC12V range or lower 40Hz to 1 MHz: frequency response within ±5%
Battery	R6P(AA battery)1.5Vx2, 6F22(9V manganese battery)x1
Built-in fuse	F1176 Φ5×20mm 0.5A/250V 1.5kA Ceramic fuse F1177 Φ5×20mm 6.3A/250V 1.5kA Ceramic fuse
Size/Mass	H165×W106×D46mm/Approx. 375g

The input resistance is the value shown in parentheses at DCV and ACV.