Yamato Electric KCS-30E Side Mounting Type/ Non-Drain Model

Manufacturer: Yamato Electric Co., Ltd.
Model: KCS-30E

Control Panel Cooler – Non-Drain Model

Equipped with the unique, highly efficient, and dirt-resistant “Spine Fin”!

Features

High efficiency and space-saving achieved through the adoption of the Spine Fin design.
Features excellent energy-saving performance due to a high COP value (Coefficient of Performance/Energy Efficiency).
An operation panel relocation kit is available as an option to enable control panel operation at a remote location.

Proprietary non-drain model. Balances ecology (eco-friendliness) and high-efficiency cooling.

Cooling efficiency of the cooler is significantly improved (Eco Mode) by using a heat exchanger with high water retention capacity (Spine Fin) and effectively utilizing the air conditioner exhaust heat. Improved evaporation performance through a drain circulation system.

Features List (Available features vary by model)

Maintenance Notification Function	Refrigerant Pressure Abnormality Alarm	Frost/Freezing Prevention Function	Temperature Sensor Abnormality Alarm

Displays a filter check output signal at set intervals.	If the refrigerant pressure rises due to filter clogging or other issues, the unit stops abnormally and the alarm contact is activated.	Automatically stops to prevent frost growth on the evaporator.	The unit stops and the alarm contact is activated if there is an abnormality in the panel internal temperature sensor or the evaporator temperature sensor.

Panel Internal Temperature Abnormality Display	Overload Protection Device	Non-Drain
An abnormality is displayed if the panel internal temperature reaches the set temperature plus $10^\circ\text{C}$ or higher.	If the compressor continues to operate under an overload condition, the protection device automatically stops the compressor.	Drain water is forcibly evaporated using the heat from the compressor and condenser within the refrigerant circuit.

V.AN COOL (Side Mounting) Non-Drain Type KCS-30E

Cooling Capacity: $2400/2600 \text{ W}$

Maintenance Notification Function	Refrigerant Pressure Abnormality Alarm	Frost/Freezing Prevention Function	Temperature Sensor Abnormality Alarm	Panel Internal Temperature Abnormality Display	Overload Protection Device	Non-Drain

Specifications

Mounting Method	Side Mounting
Model	KCS-30E-3
Cooling Capacity Note 1 (W)	2400 / 2600
Power Source (Three Phase)	200
Power Consumption Note 1 (W)	980 / 1140
Operating Current Note 1 (A)	4.5 / 4.2
Starting Current Note 1 (A)	31 / 30
Recommended Leakage Breaker Capacity Note 2 (A)	10
Operating Noise (dBA)	70 / 70
Refrigerant (Sealed Amount) (g)	R-134a (750)
Panel Internal Temp. Setting Range (°C)	25 ~ 50
Ambient Temperature Range (°C)	20 ~ 50
Operating Humidity Range (%)	85 以下
External Dimensions (W × H × D) (mm)	480 × 1360 × 300
Mass (kg)	55
Main Body Coating Color	5Y7/1
Accessories	Mounting Bolts ( $\text{M}6 \times 16\text{L}$ ) · $\dots 8$ pcs Drain Hose ( $\text{2m}$ ) · $\dots 1$ pc Hose Clamp · $\dots 1$ pc

Note 1: Cooling capacity is the rated value at: Control Panel internal dry bulb temp 35°C, wet bulb temp 19.5°C, and Control Panel external dry bulb temp 35°C. Cooling capacity is based on Technical Document No. 007 of the Industrial Association of Thermal Equipment for Control Panels.
Note 2: Rated sensitivity current 15mA.
The values indicated by / are 50Hz on the left and 60Hz on the right.