CCS Inc.
CCS PF Series High Power Strobe Control Unit
Manufacturer: CCS Inc.
Model: PF Series
Features
- Dedicated Control Unit for the High Power Strobe Lights PF series
- Light intensity: 512 levels
- Minimum strobe time of 1μs
- Lighting delay time: 0 to 100 μs (in steps of 0.1 μs)
- 2 channels (PF-A4048-2), 4 channels (PF-A16048-4)
- Ethernet and parallel communications
- Sets of parameters related to light control can be registered.
- Trigger link function(PF-A16048-4)
- You can make the Light Units on multiple channels turn ON (or OFF) with a single trigger signal that is input through one of the pins of the trigger input connector.
Registering Scenes (sets of parameters)
Light Intensity Ranges
- Each channel can be set to one of the light intensity ranges below.
The output voltage of the output connectors varies depending on the light intensity range. - High light intensity range (default): 33 to 48 VDC
- Low light intensity range: 12 to 48 VDC
- *The output characteristics and light intensity setting values for starting light emission vary with the combinations of light units and power supplies. Set the intensity range in accordance with the application.
